···
Log in / Register

Will the Car Door Lock Automatically If Not Locked?

4 Answers
LeLucia
07/29/25 5:35pm

No. Below is relevant information: How a car works: When the key is removed to cut off the power and the car door is closed, it is generally the driver who actively locks the car using the remote key. The reason is that most models on the market do not have the function of detecting the distance of the key's electronic signal. Additional information: Precautions: 1. Try to use the mechanical key to lock the car: When locking the car, it is still advisable to use the mechanical key, as this makes any signal jammer ineffective. If you don't mind the inconvenience, using the mechanical key more often can also save power and is safer than using a smart key. When using the mechanical lock, make sure the car door is properly closed and you hear the sound of the entire car locking; otherwise, it means the car was not successfully locked. 2. Try to park in a guarded parking lot and ask for a parking receipt: When parking for a long time, choose a guarded parking lot and ask for a parking receipt. This way, if any issues arise with the vehicle, you can ensure no loss occurs. However, you should still lock the car doors. Generally, in formal parking lots, criminals are less likely to enter.

Was this review help?
16
0
Share
DelJameson
08/14/25 8:48am

Oh, I'm quite familiar with this. Many modern cars come with an auto-locking feature, but it doesn't mean the doors will lock automatically if they're left unlocked. For example, my car has a speed-sensing auto-lock function—when the car reaches about 20 km/h, the doors lock automatically, but this must be enabled in the settings. Some models also have a smart key feature where the doors lock automatically when you walk a certain distance away with the key. However, if the doors weren’t properly closed in the first place—say, you parked and walked away without locking them—most cars won’t auto-lock unless you have the Walk Away Auto Lock setting enabled. I’ve seen discussions on forums where many beginners misunderstand this—it really depends on the car model and configuration. I’d recommend downloading the owner’s app to check or testing it out: lock the doors, then unlock them and walk away to see if they relock. It’s always good practice to manually confirm the doors are locked when exiting the car.

Was this review help?
13
3
Share
Expand All
AlanaLynn
10/13/25 7:49am

As a stay-at-home mom who shuttles kids around daily, I'm particularly concerned about door safety. If the doors aren't locked, some premium cars do have automatic locking features - like locking when the key moves away from the vehicle. But not all cars have this! Many basic models require manual operation. I once forgot to lock my doors and fortunately the automatic feature saved me. The reality is, auto-lock typically activates when starting or driving the car - parked vehicles won't handle forgotten locks, leaving doors potentially open to theft or kids wandering in. I recommend checking your owner's manual to see if remote locking is available; meanwhile develop the habit of manually confirming locked doors before leaving - safety trumps convenience. Especially in rainy weather or crowded areas, don't gamble by relying solely on automation.

Was this review help?
15
0
Share
Expand All
VanRylee
11/27/25 2:01am

Last time I parked and forgot to lock the car, I later found it had locked itself—turns out the key fob's walk-away auto-lock feature was working. Not all cars support this; it depends on the model's configuration. For example, my SUV has it, but my friend's older sedan doesn't. Generally, the auto-lock function activates either after driving acceleration or when you walk a certain distance away. If the doors weren't locked at all—like if you didn't press the remote when parking—it might not automatically handle it. I recommend quickly checking the manual to set it up and test by walking away, and also get into the habit of manually locking to prevent issues.

Was this review help?
13
0
Share
Expand All
More Forum Discussions

What is the difference between an electronic parking brake and autohold?

The differences between an electronic parking brake and autohold are: 1. Different symbols: The symbol for the electronic parking brake is 'P'; the symbol for autohold is 'A'. 2. Different functions: The electronic parking brake achieves parking by clamping the friction between the brake shoes and the brake drum or between the friction pads and the brake disc; autohold is an extension of ESP, allowing the driver to avoid prolonged braking when the vehicle is stopped, preventing unnecessary sliding of the vehicle. The method of using the electronic parking brake is: 1. Press the electronic parking brake to stop braking; 2. Lift the electronic parking brake to start braking. The method of using autohold is: 1. In situations requiring short stops, such as at traffic lights, the system will automatically brake the wheels after the vehicle comes to a stop to prevent rolling; 2. When starting on an uphill slope, the system will automatically brake to prevent rolling backward.
12
1
Share

How to Enable the Horn Sound When Locking the Baojun 510?

To enable the horn sound when locking the Baojun 510: 1. Press and hold the unlock or lock button on the remote key for more than 3 seconds to switch between audible and silent locking. 2. To restore the horn sound, simultaneously press and hold both the lock and unlock buttons for 3 seconds. Below are more details about the Baojun 510: 1. The Baojun 510 is a compact 5-door, 5-seat SUV with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, and a wheelbase of 2550mm. 2. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 73 kW and a maximum torque of 135 Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
17
2
Share

How to Drive a Manual Transmission Car in Crowded Areas

When driving a manual transmission car in crowded areas, follow these steps: 1. Engage first gear only to avoid collisions, minimize shifting hassle, and maintain better speed control. 2. Keep your foot on the clutch in a semi-engaged state. To move forward, slightly release the clutch while gently pressing the accelerator. To slow down, depress the clutch and ease off the accelerator. To stop completely, apply the brakes. In heavy traffic or densely populated areas where frequent stopping and starting is required, vehicle control becomes crucial. Regardless of the method used, the primary goal is speed regulation. Technique is just one aspect - equally important is possessing proficient driving skills, quick reflexes, and sharp mental alertness. Never drive after consuming alcohol. Road safety is paramount, and every driver must prioritize safe driving awareness.
8
1
Share

What are the correct steps to use the Volkswagen Passat electronic parking brake?

Volkswagen Passat electronic parking brake correct usage steps: Step on the brake pedal, shift to P or N gear, then pull up the electronic parking brake button with your finger. Below is relevant information about the electronic parking brake: 1. The electronic parking brake serves the same function as a traditional handbrake but offers improved performance. 2. The electronic parking brake is part of the Electronic Parking Brake (EPB) system. The EPB system integrates temporary braking during driving with long-term parking braking functions, all controlled electronically to achieve parking brake technology. 3. The electronic parking brake implements parking brake technology through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking brake control through friction generated between the brake disc and brake pads, except that the control method changes from a mechanical handbrake lever to an electronic button.
11
4
Share

How to Read the Fuel Gauge Display on a Mercedes-Benz C200?

The fuel gauge of the Mercedes-Benz C200 is displayed at the lower part of the left instrument cluster pod. '0' indicates empty, while '1' indicates full, with multiple segments in between showing the fuel level. Here are some related details: 1. With the engine idling, transmission in P position, and transmission oil temperature at 45°C, loosen the transmission oil pan drain plug. It's normal for bubbles to appear when the transmission oil flows out. The transmission oil and filter should be replaced every 60,000 km for Mercedes-Benz vehicles. Within 60,000 km, there's no need to check the transmission oil level unless there are oil leaks under the vehicle. 2. The Mercedes-Benz C200 is equipped with a 722.6 transmission (model A000-989-2103). The oil should be added from the fill tube located behind the engine on the left side of the engine bay. After adding 6.5 bottles of oil, the oil level must be checked. A relatively long dipstick is required to check the oil level.
7
5
Share

What are the reasons why the car charging cable cannot charge?

The following are the specific reasons why the car charging cable cannot charge: 1. Fuse blown: The fuse of the vehicle's USB charging port is blown. Refer to the vehicle's user manual to locate the corresponding fuse. If it is blown, promptly replace it with a spare fuse; the data cable is damaged; the phone's charging port spring is loose, resulting in poor contact. 2. Insufficient current output: Check the application range of the USB charging port in the vehicle's user manual. Generally, USB ports used only for data reading have a current output of 0.5A, while phone charging ports require at least 1A current output.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.