Will the car be the same as before after being repaired from a rear-end collision?

1 Answers
KaydenRose
07/29/25 3:20pm
After being repaired from a rear-end collision, the car will be basically the same as before, but there may still be subtle differences. Repair is just repair and cannot completely restore the car to its original condition. It can only be said that after the repair is completed, it is basically the same as before, but upon closer inspection, some differences can still be noticed. Of course, you can also choose to replace the parts with original factory new ones. Here are some driving precautions: 1. Check the rearview mirrors: When turning or changing lanes, you must use the turn signals, slow down, and always check the rearview mirrors before turning. Left turns mainly require checking the left rearview mirror, right turns mainly require checking the right rearview mirror, and both left and right turns require checking the interior rearview mirror. 2. Don’t stare at the front of the car: When driving on a clear road, look straight ahead at about 100 meters, and don’t stare at the immediate front of the car. 3. Depress the clutch: Usually, when decelerating at speeds above 40 km/h, you don’t need to depress the clutch first; wait until the speed drops to around 20 km/h before depressing the clutch. 4. Steering: Turn the steering wheel slowly at high speeds and quickly at low speeds.
Was this review help?
8
3
Share
More Forum Discussions

How to Remove the Rear Seats of a Corolla?

Corolla rear seat removal method: There is a release switch button under the headrest. Press the button to remove it. When installing the seat, push it firmly into place, then feel with your hand to ensure it aligns with the clips. Once aligned, press down firmly to secure the seat cushion. The Corolla (formerly translated as "Corolla Flower") is a brand under Toyota. The Corolla is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads, ensuring excellent sporty performance.
17
3
Share

What are the components on the cylinder head?

Here is an introduction to the components on the cylinder head: 1. Basic components: The cylinder head has intake and exhaust valve seat holes, valve guide holes, and spark plug mounting holes (for gasoline engines) or fuel injector mounting holes (for diesel engines). Some cylinder heads also have water jackets, intake and exhaust passages, and the combustion chamber or part of the combustion chamber. If the camshaft is installed on the cylinder head, the cylinder head also has camshaft bearing holes or camshaft bearing seats and their lubrication oil passages. 2. Structural forms: Cylinder heads are divided into three structural forms: integral, block, and monoblock. Note: The function of the cylinder head is to seal the upper part of the cylinder and, together with the piston top and cylinder wall, form the combustion chamber.
3
4
Share

What is the normal pressure for adding refrigerant to a car air conditioner?

The normal pressure for adding refrigerant to a car air conditioner is: low pressure 150 to 250 kPa, high pressure 1300 to 1500 kPa. After completing the refrigerant charging, close the low-pressure manual valve on the manifold gauge, shut off the injection valve on the refrigerant canister, stop the engine, and quickly remove the manifold gauge from the compressor to avoid excessive refrigerant leakage. Methods for charging car refrigerant: 1. High-pressure side charging; 2. Low-pressure side charging. Due to the different states of the refrigerant being charged, these two methods vary significantly. High-pressure side charging involves liquid refrigerant, suitable for initial charging after leak detection and vacuuming. Note that this method requires the engine to be off and the refrigerant canister to be inverted. The other method, low-pressure side charging, involves gas and is slower, typically used for supplementing refrigerant.
14
5
Share

What are the reasons for the steering wheel not turning?

The reasons for the steering wheel not turning are: 1. Damage to the power steering pump; 2. Automatic steering wheel lock; 3. Air not being completely purged from the system after fluid leakage. The automatic steering wheel lock is a simple anti-theft feature. Sometimes when parking, the steering wheel is positioned at a certain angle where turning the ignition key alone cannot unlock it, leading to this situation. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Generally, the steering wheel is connected to the steering shaft via splines, and its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a steering wheel with a larger diameter reduces the hand force required by the driver when turning. The steering intermediate shaft, as a connecting component between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel more reasonable in the vehicle.
6
5
Share

What is the fuel tank capacity of the UY125 in liters?

The fuel tank capacity of the UY125 is 6 liters. Below is an introduction to fuel-saving methods for motorcycles: 1. Let the engine run for about one minute before starting to move: If you start driving immediately after ignition, it not only wastes fuel but also increases wear on engine components. 2. Start in a low gear, grasp the right timing, shift gears promptly, and try to maintain a moderate speed: The higher the speed, the greater the air resistance, and the more fuel is consumed. The lower the speed, the lower the corresponding gear, and the less efficiently the engine's power is utilized, thus requiring more fuel to cover the same distance. 3. Regularly clean the air filter: Only with sufficient clean air entering the cylinder can the fuel in the cylinder burn more completely, resulting in lower fuel consumption.
16
2
Share

What are the penalties for not carrying the vehicle license?

Not carrying the vehicle license may result in a warning or a fine ranging from 20 to 200 yuan, or the vehicle may be impounded. The following are the specific penalties for not carrying the vehicle license: 1. Vehicle impoundment penalty: According to Article 95 of the "Road Traffic Safety Law of the People's Republic of China" (referred to as the "Traffic Law"), if the vehicle owner does not carry the vehicle license, the traffic management department of the public security authority shall impound the vehicle. 2. Fine penalty: The relevant party will be notified to provide the corresponding license plate, markings, or complete the necessary procedures, and may be fined 20-200 yuan in accordance with Article 90 of this law, along with a warning.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.