Will the BYD Han 2021 Have a New Model?

1 Answers
LaJason
07/29/25 5:35pm
BYD Han 2021 will have a new model. Here are the relevant details: 1. Body dimensions: The vehicle's body length is 4960 mm, width is 1910 mm, height is 1495 mm, wheelbase is 2920 mm, front track is 1640 mm, rear track is 1640 mm. It is a four-door, five-seater sedan with a fuel tank capacity of 48 liters. 2. Exterior design: The BYD Han adopts a brand-new design language, distinctly different from other models in the family. The front features a slim silver trim strip running across the hood, connecting with the horizontally arranged LED matrix headlights designed in a flat style.
Was this review help?
7
5
Share
More Forum Discussions

What are the differences between Volkswagen Bora and Lavida?

The differences between Volkswagen Bora and Lavida are: 1. Different dimensions: The length, width, and height of the Volkswagen Bora are 4663mm, 1815mm, and 1462mm respectively; while those of the Lavida are 4670mm, 1806mm, and 1474mm respectively. 2. Different trunk volumes: The trunk volume of the Volkswagen Bora is 506 liters; whereas the Lavida's trunk volume is 510 liters. Both the Volkswagen Bora and Lavida feature front-wheel drive, MacPherson strut front suspension, torsion beam rear suspension, electric power steering, and a monocoque body structure.
6
5
Share

How to reset the tire pressure monitoring light on a Changan CS75 Plus?

First, press the one-touch start button on the center console to start the vehicle's engine; otherwise, the tire pressure cannot be reset. After starting the engine, press the illustrated button on the left side of the steering wheel to enter the tire pressure setting interface, then select the corresponding button on the instrument panel. After selecting the appropriate content button, press and hold the custom button on the right side of the steering wheel until you hear a beep, then release it. Check the vehicle's instrument panel to confirm that the tire pressure warning light has been reset.
15
0
Share

Is there 98 octane gasoline available?

As of now, major cities across the country have gas stations offering 98 octane gasoline. 98 octane gasoline refers to fuel whose octane rating is equivalent to a mixture of 98% isooctane and 2% n-heptane. Engines with high compression ratios should use high-octane gasoline; using low-octane gasoline in high-compression engines can cause abnormal combustion. Relevant information about gasoline is as follows: 1. Introduction: Gasoline is a volatile, flammable liquid hydrocarbon mixture distilled and cracked from petroleum, used as fuel. It appears as a transparent liquid, is flammable, and has a distillation range of 30°C to 220°C. 2. Key Characteristics: The important properties of gasoline include volatility, stability, anti-knock quality, corrosiveness, and cleanliness.
16
4
Share

How to Modify the Display Screen of an Old Audi Q3?

You can directly remove the plastic from the original car screen by hand. Carefully take off the air vents in front of the dashboard to avoid damage. Use a specialized wrench to remove the two fixing screws on the main unit, then detach the original car main unit. Connect two CAN bus lines using professional clips. Install the control system behind the original car screen. Add a touch panel to the LCD screen and connect the Audi-specific control system in series to the original car's cable socket. Insert the corresponding fiber optic cable into the empty fiber optic socket at the back of the original car main unit. After setting up the control system and touch screen, reinstall the original car screen.
11
1
Share

Should the sedan stabilizer bar be tightened very tightly?

Automobile stabilizer bars need to be tightened; otherwise, they can easily loosen when the car encounters bumps during driving. The function of the stabilizer bar is to generate anti-roll resistance (Roll Resistance) to inhibit body roll when the horizontal heights of the left and right wheels are different, preventing the bar from twisting. The stabilizer bars used in sedans are installed in different parts and can be categorized into: 1. Chassis reinforcement stabilizer bar; 2. Rear axle suspension reinforcement stabilizer bar; 3. Front crossmember stabilizer bar; 4. Toe-in stabilizer bar; 5. Front shock absorber tower top stabilizer bar; 6. Front lower control arm stabilizer bar; 7. Rear shock absorber tower top stabilizer bar.
11
0
Share

What is the total weight of the Volkswagen Tayron?

The total weights of the Volkswagen Tayron are as follows: 1. The body weight of the 1.4T displacement model is 1405 kilograms; 2. The body weight of the 2.0T displacement model is 1590 kilograms. Taking the 2020 Volkswagen Tayron as an example: the exterior dimensions of the body are 4589mm in length, 1860mm in width, 1660mm in height, and the wheelbase is 2731mm. The Volkswagen Tayron is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150, a maximum torque of 250 Nm, a torque range of 1750 to 3000 rpm, a maximum power of 110 kW, and a power range of 5000 to 6000 rpm.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.