Will the bubbles on car paint disappear after exposure to sunlight?

2 Answers
OAiden
07/29/25 8:30am
Bubbles on car paint will not disappear after exposure to sunlight. Below is relevant information about bubbles on car paint: Treatment methods: Bubbles on car paint are caused by inferior paint and poor workmanship, such as improper treatment of the metal surface or failure to apply anti-rust primer during painting. It should be addressed as soon as possible. Ensure that the technician thoroughly sands down all rusted areas before applying a layer of anti-rust primer, followed by the color paint. Ideally, a layer of clear coat should also be applied over the color paint to make the paint more durable. Paint maintenance methods: After using the vehicle: Remove dust from the car body promptly to minimize the adsorption of dust due to static electricity on the body. Wash the car promptly after rain: Rainwater contains many acidic substances and dust. The rain marks on the car body will gradually shrink, increasing the concentration of acidic substances in the rainwater. Combined with the dust in the rainwater forming rain marks, if not rinsed off with clean water in time, the car's paint surface will be damaged over time.
Was this review help?
4
5
Share
ChloeDella
08/11/25 6:01pm
I've been repairing cars for twenty years, and to be honest, paint bubbles caused by sun exposure definitely won't disappear on their own. Just recently, a Highlander owner believed in a folk remedy and left his car outside in the scorching heat for a whole day. The result? The bubbles swelled up to the size of coins! This happens because bubbles are caused by rust or moisture trapped beneath the paint layer. When exposed to the sun, the moisture inside expands even more. Even if the surface dries out, the underlying metal is already corroded, and the only solution is to sand it down and repaint. Don't take the risk—if you see small bubbles, get them fixed immediately. Otherwise, the repair costs later on will really hurt your wallet.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What does DTC mean on a BMW car?

DTC on a BMW car stands for Dynamic Traction Control, which integrates active safety technologies such as ESP and traction control to prevent the vehicle from losing control. Taking the 2020 BMW 3 Series as an example, it is a mid-size car with the following dimensions: length 4719mm, width 1827mm, height 1459mm, wheelbase 2851mm, and a fuel tank capacity of 59L. The 2020 BMW 3 Series features a double-joint spring strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 250Nm, paired with an 8-speed automatic transmission.
9
4
Share

What are the reasons for a loud car engine sound?

The reasons for a loud car engine sound are: 1. Aging engine mounts; 2. Worn engine mounts; 3. Severe carbon buildup in the engine; 4. Faulty engine cylinders; 5. Poor lubrication; 6. Excessive wear of pistons and cylinder walls; 7. Engine overheating, cooling system failure; 8. Blocked exhaust system, vacuum tube leakage or breakage; 9. Loose belts. Solutions for a loud car engine sound: 1. Replace engine oil and oil filter, clean the engine; 2. Check the working condition of pistons and cylinders; 3. Inspect the cooling system; 4. Check the tightness of the belts; 5. Add engine oil to improve lubrication.
13
4
Share

What is the reason for the reverse touch screen function on car displays?

During the installation of the rearview camera, the front-view camera was mistakenly mounted at the rear of the vehicle. Below is relevant information about the rearview camera system: 1. Introduction: Also known as the parking assist system, reverse visual system, or onboard monitoring system, this system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. The most commonly used display types are digital display, screen display, and multifunctional rearview mirror display. 2. Function: This system provides a more intuitive and clear view of the rear when reversing. When the reverse gear is engaged, the system automatically activates the high-definition rearview camera located at the rear of the vehicle, displaying a clear image of the rear situation on the LCD screen, allowing the driver to accurately assess the road conditions behind.
8
0
Share

What does the automotive EPC refer to?

Automotive EPC refers to the Electronic Stability Program (ESP), where a constantly illuminated indicator light signifies a malfunction in the engine or electronic systems. If this light remains on or flashes after ignition or during driving, it indicates that the management system has detected a fault in the engine's electronic system. The Electronic Stability Program is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle reaches its dynamic limits. The ESP improves vehicle safety and handling by supporting the functions of ABS (Anti-lock Braking System) and ASR (Acceleration Slip Regulation, also known as Traction Control System). It analyzes vehicle state information from various sensors and sends corrective commands to ABS and ASR to help maintain dynamic balance.
15
3
Share

What are the consequences of delaying a vehicle inspection by a few days?

Vehicle inspection must be completed by the end of the month in which the inspection is due. If the inspection is conducted in the following month after the due date, a fine will be imposed along with a deduction of three points. Below are specific details about vehicle inspections: 1. Regulations: Motor vehicles registered for road use must undergo regular safety technical inspections in accordance with laws and administrative regulations, considering factors such as vehicle purpose, passenger and cargo capacity, and service life. 2. Insurance: Vehicle inspection agencies must conduct inspections upon presentation of the vehicle's driving license and compulsory third-party liability insurance policy, with no additional conditions permitted by any unit. For vehicles that meet national safety technical standards, the traffic management department of the public security authority shall issue an inspection compliance mark.
5
3
Share

Why don't cars need to look at traffic lights when turning right?

Under the condition of not affecting straight-going vehicles and pedestrians, right turns can be made without looking at the traffic lights. The following are specific instructions for right turns at traffic light intersections: 1. Arrow-shaped traffic lights: A red turn prohibition indication means right turns are forbidden. Vehicles must strictly follow the traffic signals. Violating traffic signals, whether going straight or turning right, constitutes running a red light and will result in a 6-point deduction. 2. Circular traffic lights without signs: Motor vehicles can make a right turn at a red light intersection, which is not considered running a red light. However, drivers should pay attention to pedestrians and drive carefully to avoid traffic accidents. 3. Circular traffic lights with signs: If there is a restriction on right-turning vehicles, they must stop and wait until right turns are permitted before proceeding.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.