Will the BMW X5 be domestically produced?

What is the method for installing a one-touch start system in the Sagitar?

The method for installing a one-touch start system in the Sagitar is as follows: Turn the mechanical key to the 'NO' position to power up the entire vehicle. The wire on the original ignition switch that does not carry electricity is the starter motor wire. Connect this wire to the starter motor wire of the one-touch start system. Taking the 2021 Sagitar as an example, it is a compact car with the following dimensions: length 4753mm, width 1800mm, height 1462mm, and a wheelbase of 2731mm. The fuel tank capacity is 50 liters. The 2021 Sagitar features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 112PS, a maximum power output of 85kW, and a maximum torque of 175Nm. It is paired with a 5-speed manual transmission.

19

2

Share

What car is the Tang logo?

Tang logo represents the BYD Tang, which is a dual-mode hybrid SUV. Taking the 2021 automatic flagship BYD Tang as an example, its body dimensions are: length 4870mm, width 1940mm, height 1720mm, wheelbase 2820mm, fuel tank capacity 68l, and curb weight 1895kg. The 2021 automatic flagship BYD Tang has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 2.0l turbocharged engine, with a maximum horsepower of 192ps, maximum power of 141kw, maximum torque of 320nm, and is paired with a 6-speed automatic transmission.

17

0

Share

Will a car definitely be damaged if it stalls in water and is restarted a second time?

Restarting a car after it stalls in water does not necessarily cause damage. If the engine has not taken in water, there will be no damage, but if water has entered the engine, damage will occur. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The effects of a car driving through water include: 1. The engine may produce insufficient power and experience shaking issues; 2. The high-voltage ignition system may become damp or short-circuit due to water ingress; 3. Water may enter the exhaust pipe; 4. Residual water can prevent the brake discs and brake pads from fully engaging, causing a loss of braking power; 5. Debris can easily adhere to gaps in the chassis, leading to rust; 6. Moisture may form inside the headlights, affecting light transmission; 7. The wiring harness and electrical connectors in the engine compartment may become wet and cause short circuits.

3

5

Share

What are the differences between the 2018 Santana and the 2019 Santana?

The differences between the 2018 Santana and the 2019 Santana are: 1. Different 0-100 km/h acceleration times: the 2018 Santana takes 11.4 seconds, while the 2019 Santana takes 12.6 seconds. 2. Different fuel tank capacities: the 2018 Santana has a 55-liter fuel tank, while the 2019 Santana has a 52.8-liter fuel tank. 3. Different length and height: the 2018 Santana measures 4475mm in length and 1469mm in height, while the 2019 Santana measures 4282mm in length and 1489mm in height. 4. Different power outputs: the 2018 Santana has a maximum horsepower of 110ps, maximum power of 81kw, and maximum torque of 150nm; the 2019 Santana has a maximum horsepower of 112ps, maximum power of 82kw, and maximum torque of 145nm.

8

0

Share

What is the difference between Volkswagen 230 and 280?

The differences between Volkswagen 230 and 280 are: 1. Different 0-100 km/h acceleration time: Volkswagen 230 takes 8.9s; Volkswagen 280 takes 8.5s. 2. Different length: Volkswagen 230 is 4259mm; Volkswagen 280 is 4262mm. 3. Different curb weight: Volkswagen 230 weighs 1315kg; Volkswagen 280 weighs 1310kg. 4. Different power: Volkswagen 230 has a maximum horsepower of 131ps, maximum power of 96kw, and maximum torque of 225nm; Volkswagen 280 has a maximum horsepower of 150ps, maximum power of 110kw, and maximum torque of 250nm.

1

4

Share

What is the correct method for shifting gears in a manual transmission car?

The correct method for shifting gears in a manual transmission car is: 1. Before shifting, observe the engine speed. Shift when the speed is between 2000 and 2500 RPM to avoid sluggish acceleration, jerking, or a dull throttle response after shifting; 2. Fully depress the clutch pedal while releasing the throttle, then move the gear lever to the corresponding gear; 3. After completing the shift, lift the clutch to the semi-engaged state. Once the car's power output and transmission are smoothly connected, gently press the throttle to apply power, then slowly release the clutch. The steps for starting a manual transmission car are: 1. Sit properly in the driver's seat; 2. Start the car; 3. Depress the clutch; 4. Engage first gear; 5. Slowly release the clutch; 6. Gently press the throttle; 7. Fully release the clutch to complete the car's start.

17

0

Share

Will the BMW X5 be domestically produced?

What is the method for installing a one-touch start system in the Sagitar?

What car is the Tang logo?

Will a car definitely be damaged if it stalls in water and is restarted a second time?

What are the differences between the 2018 Santana and the 2019 Santana?

What is the difference between Volkswagen 230 and 280?

What is the correct method for shifting gears in a manual transmission car?

What are the effects of a faulty intake solenoid valve?

Is Ignition Advance Angle the Same as Ignition Timing?

Why is the Audi RS7 called the 'Suited Thug'?

Where is the standard position of the car oil dipstick?