Will the Active Braking System Affect Overtaking?

1 Answers
DelMaya
07/29/25 4:40am
It will not affect overtaking. The active braking system relies on the optical radar on the front windshield of the vehicle to assess the traffic situation ahead. If an emergency arises, the active braking system will immediately activate. The active braking system does not bring the vehicle to a complete stop but assists in deceleration. Below is an introduction to the active braking system: 1. Function: The active braking system is part of the active safety system. Among the active safety features, the most typical function is the active braking system, which can effectively prevent rear-end collisions. The active braking system activates when the vehicle speed exceeds 30 km/h, helping the driver reduce braking distance, effectively avoid obstacles, and enhance driving safety. 2. Operation Method: No manual operation is required. Vehicles equipped with the active braking system will automatically activate the system when the speed exceeds 30 km/h. In case of danger, the system will engage automatically without any intervention needed from the driver, making it very convenient.
Was this review help?
18
5
Share
More Forum Discussions

What maintenance items are required for a sedan at 50,000 kilometers?

The maintenance items for a sedan at 50,000 kilometers include: replacing engine oil, oil filter, air filter, cabin air filter, fuel filter, spark plugs, and belts; 2. Inspecting the chassis, brake pads, brake discs, and tires. Sedan maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain components of the car, also known as car servicing. The purposes of sedan maintenance are: 1. To keep the vehicle clean and in good technical condition; 2. To eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. Precautions for sedan maintenance include: 1. Do not run the engine for a long time in an unventilated garage; 2. Do not suck on fuel pipes with your mouth; 3. Avoid contact with carburetor cleaner.
20
3
Share

How to Replace the Battery in a Buick Regal Car Key?

To replace the battery in a Buick Regal car key, follow these steps: 1. Press the silver button on the top of the key to remove the mechanical key; 2. Use a flathead screwdriver to pry open the key; 3. After opening the key cover, use a flathead screwdriver to remove the old battery; 4. Install the new battery with the positive side facing up; 5. Reassemble the key cover and mechanical key. The Buick Regal has the following specifications: length 4904mm, width 1863mm, height 1461mm, wheelbase 2829mm, fuel tank capacity 55 liters, trunk capacity 441 liters, curb weight 1430kg, and is equipped with a 1.5T turbocharged engine with a maximum power of 124kW and maximum torque of 250Nm.
18
3
Share

What is the ground clearance of the 2018 Toyota Camry in mm?

The 2018 Toyota Camry has a ground clearance of 155mm. The body structure of the 2018 Toyota Camry is a 4-door, 5-seater sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, front track 1575mm, rear track 1585mm, fuel tank capacity 50 liters, luggage compartment capacity 620 liters, and curb weight 1660kg. The 2018 Toyota Camry features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.5L naturally aspirated engine producing a maximum horsepower of 178PS, maximum power of 131kW, and maximum torque of 221Nm, paired with an electronic continuously variable transmission.
2
1
Share

Is 80 psi acceptable for road bike tire pressure?

No, additional inflation is required. Road bikes typically have a maximum tire pressure of 120 psi, with standard pressures being 100 or 110 psi. High-speed tires can reach up to 160 psi maximum, with standard pressures of 140 or 150 psi. The maximum allowable tire pressure for car tires is marked on the sidewall; it's advisable to maintain pressure 10 psi below this marked value. Further details are as follows: Relationship between total load and tire pressure: The narrower the road bike tire, the greater the total load and the higher the required tire pressure. For every 1kg increase in tire load weight, tire pressure should be increased by 1%. Front/Rear wheel pressure: The maximum and minimum pressure values are indicated on the sidewall of the tire. Heavier vehicle weight requires higher tire pressure, with front wheel pressure generally lower than rear wheels. However, suspension-equipped bicycle tires should maintain slightly higher pressure than non-suspension models.
7
5
Share

What is the impact of a brake switch failure on the throttle?

Brake switch failure can cause the throttle to lose power. Below is an introduction to the handbrake: Introduction: The handbrake is used to stabilize the vehicle after it comes to a stop, preventing accidents caused by rolling on inclined surfaces. Location: Typically, the handbrake is positioned within easy reach of the driver's right hand for convenience, though some models may place the parking brake on the side of the brake pedal. Principle: The parking brake only applies braking force to the rear wheels, using two metal cables to pull the rear brake pads, thereby achieving the braking effect. Normally, when the handbrake lever is pulled to about 70% of its full travel, it should be in the proper braking position. Before testing the handbrake's braking force, it's necessary to locate this point, which can be determined by counting the clicks of the ratchet. The 70% position is the effective working point of the lever.
16
3
Share

Difference Between 91V and 91W Tires

Here are the specific differences between 91V and 91W car tires: 1. Speed rating: V indicates that the maximum speed this tire can withstand is 240 km/h, while W indicates a maximum speed of 270 km/h. 2. Load index: Both 91W and 91V tires can carry a load of 615 kg. Below is extended information about car tire specifications: 1. Specification representation: Tires are important components of vehicles, and they come in various specifications suitable for different car models. Specification markings are usually found on the tire sidewall as a series of alphanumeric characters, representing tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Based on different maximum speed capacities, tire speed ratings are classified from A to Z, with grade A further divided into eight sub-levels from A1 to A8. The later the letter representing the speed rating appears in the alphabet, the better the tire's performance.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.