Will the 2016 New LaCrosse Dry Dual-Clutch Transmission Fail?

Is It Safe to Store Gasoline in Iron Drums During Summer?

It is not safe. Below are precautions for storing gasoline: 1. It is best to use metal containers for gasoline storage: The lid must be tightly screwed to prevent gasoline molecules from escaping. The gasoline drum should be placed in a cool, well-ventilated area away from fire, electricity, and heat sources, and where it is not easily knocked over. Never place it in living rooms, kitchens, corridors, or wooden staircases. 2. If you suddenly smell gasoline at home: Conduct an inspection immediately, but never use an open flame for illumination. If you find a gasoline storage container is cracked or leaking, replace it promptly. Welding is strictly prohibited as it can easily cause an explosion. 3. If a gasoline storage container is knocked over: If a large amount of gasoline spills indoors, evacuate all household members quickly and immediately extinguish all ignition sources indoors and outdoors. Do not turn on lights or operate electrical switches, as the resulting sparks can cause gasoline to ignite. Also, open windows and doors for ventilation. 4. Gasoline storage containers: Do not fill them completely; leave at least 5% of the container's volume empty to allow gasoline molecules room to "move," as gasoline expands when heated, which can force the container to "bulge" or even rupture. 5. When using iron or fiberglass containers for storage: Ensure they are tightly sealed. Avoid plastic containers, as they can generate static electricity. Store in a cool place, and do not store too much gasoline for too long, as it can deteriorate. Keeping gasoline fresh is beneficial for the engine. 6. Empty gasoline drums: If they are no longer used for gasoline, they must be processed. Residual gasoline in the drum can easily volatilize and explode if exposed to fire. Therefore, before any heat processing, fill the drum with water and empty it repeatedly to wash away the gasoline.

19

3

Share

How to Use Geely's Cruise Control?

Specific steps for using Geely's cruise control: 1. Activate the speed cruise system by setting the sliding switch to the "ON" position. 2. Set the cruise speed After the system is activated, press the "SET" button when the desired speed is reached, and the car will maintain this speed continuously. Below is more information about using cruise control: 1. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. When the accelerator pedal is released, the system will restore the speed to the set cruise speed; if the speed exceeds the cruise speed by more than 10km/h and maintains this speed for more than 5 minutes, the cruise speed must be reset. 2. To decrease the cruise speed, press the "SET" button, and the speed will decrease by 1.5km/h; if the button is held down, the car will continue to decrease speed. Once the button is released, the current driving speed will be stored in the memory.

13

0

Share

How to set the sound prompt when locking the Tayron?

To set the sound prompt when locking the Tayron, you must visit a 4S store and have a technician assist with the setup. Here is more information about the Tayron: 1. The Tayron is a premium German mid-size SUV produced by FAW-Volkswagen, offering four powertrain options: 280TSI, 330TSI, 380TSI, and both front-wheel drive and all-wheel drive. 2. As a mid-size SUV from Volkswagen, the Tayron is based on the European version of the Tiguan. 3. The Tayron sets a new standard for premium German mid-size SUVs in terms of design, handling, comfort, cutting-edge technology, space structure, and safety features. 4. It incorporates multiple advanced driving assistance systems, such as the TJA Traffic Jam Assist system, ACC 3.0 Adaptive Cruise Control system, and PLA 3.0 Intelligent Parking Assist system, providing users with a safe driving experience.

5

4

Share

How to Handle 30 Points Deducted from Driver's License?

If more than 30 points are deducted within a scoring cycle, you are required to attend a seven-day educational training and retake both Subject 1 and Subject 3 of the driving test before you can retrieve your driver's license and clear the points. The following situations will result in a 12-point deduction: 1. Vehicle type mismatch; driving a motor vehicle that does not match the permitted vehicle type; 2. Drunk driving; driving a motor vehicle after drinking alcohol; 3. Overloading; driving a commercial passenger vehicle (excluding buses) or school bus with more than 20% of the approved passenger capacity; 4. Hit-and-run; causing a traffic accident and fleeing the scene without constituting a crime; 5. License plate violation; driving a motor vehicle on the road without a license plate, or intentionally covering, damaging, or not installing the license plate as required; 6. Forged or altered license plates; using forged or altered motor vehicle license plates, driving licenses, school bus signs, or using other motor vehicle license plates or driving licenses; 7. Unqualified driving; driving a motor vehicle on the highway in reverse, against traffic, or crossing the central divider to make a U-turn; stopping a commercial passenger vehicle in a highway lane; driving medium-sized or larger passenger or cargo vehicles, school buses, or hazardous material transport vehicles on highways or urban expressways exceeding the speed limit by 20% or more, or on other roads exceeding the speed limit by 50% or more, as well as driving other motor vehicles exceeding the speed limit by 50% or more; driving medium-sized or larger passenger vehicles or hazardous material transport vehicles for more than 4 hours without stopping to rest or resting for less than 20 minutes; driving a school bus without the proper qualifications.

11

0

Share

Which manufacturer produces the Hanteng X5?

Hanteng X5 is produced by Hanteng Automobile Co., Ltd. More relevant details are as follows: 1. The Hanteng X5 features front-engine, front-wheel drive, electric power steering, a front McPherson independent suspension, and a rear torsion beam non-independent suspension. 2. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum power of 115 kW, a maximum torque of 215 Nm, and is paired with a 5-speed manual transmission. Taking the Hanteng X5's drive system as an example, its body dimensions are: length 4501mm, width 1820mm, height 1648mm, with a wheelbase of 2600mm, a fuel tank capacity of 50L, and a body weight of 1410kg.

13

0

Share

How to reset the wrench light on JAC Refine S3?

The "small wrench" appearing on the dashboard is a maintenance indicator, reminding the driver that the vehicle requires timely servicing. If maintenance hasn't been completed, this light will illuminate. Here are the steps to reset the indicator: 1. Turn off the ignition switch; 2. Press and hold the adjustment rod at the lower right of the instrument panel; 3. Turn the ignition switch to the "ON" position; 4. After approximately 5 seconds of ignition being on, the maintenance light will turn off, at which point you can release the adjustment rod. After vehicle maintenance, it's crucial to reset the maintenance reminder. Otherwise, you won't be able to accurately track the usage time of new components during the next replacement.

1

Share

Will the 2016 New LaCrosse Dry Dual-Clutch Transmission Fail?

Is It Safe to Store Gasoline in Iron Drums During Summer?

How to Use Geely's Cruise Control?

How to set the sound prompt when locking the Tayron?

How to Handle 30 Points Deducted from Driver's License?

Which manufacturer produces the Hanteng X5?

How to reset the wrench light on JAC Refine S3?

What Causes Air Leakage from the Driver's Door?

What materials are required for the 6-year exemption inspection of company vehicles?

Why is the fuel measurement system for cylinder bank 1 too rich?

What is the displacement of the Bora?