Will Submitting to the Arrangement for Subject 2 Reservation Succeed?

1 Answers
MacWilliam
09/09/25 3:25am
Submitting to the arrangement for Subject 2 reservation does not necessarily guarantee success, but it increases the chances. Here is the content about Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is referred to as the field driving skill test. The test items for small cars C1 and C2 include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and curve driving (commonly known as the S-curve). Some regions also include a sixth item: high-speed toll card collection. Teaching objectives: Master the basic essentials of driving operations and possess the fundamental ability to control the vehicle; proficiently master the basic methods of field and road driving within the site, possess the ability to reasonably use vehicle controls and correctly control the spatial position of the vehicle movement, and accurately control the vehicle's driving position, speed, and route.
Was this review help?
3
5
Share
More Forum Discussions

What does it mean when the engine warning light of a Zhonghua Junjie stays on?

The engine warning light may stay on for the following 7 main reasons: Sensor malfunction: The sensors involved include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen, etc. When these sensors are damaged, have poor contact, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel and oil quality issues: Failure to use the fuel and oil as specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of the air-fuel mixture: This can result in engine carbon buildup or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all cause poor combustion of the air-fuel mixture. Turbocharging issues: Problems with the intake boost pipeline or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: If the vehicle's intake system is compromised, it may lead to engine pipeline blockages, and in severe cases, trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake problems. Exhaust issues: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, with the catalytic converter being the most frequent issue. The use of leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily lead to catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails, or if there's a mismatch between the anti-theft controller and the engine electronic controller, the anti-theft system can prevent the engine from operating normally, also causing the engine warning light to illuminate. If the engine warning light is on, follow these steps: First, check if the engine is running normally, looking for signs of shaking, smoke, etc. If such symptoms are present, avoid restarting the engine. Particularly, do not restart the engine if the red warning light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check when powered on. After 5-10 seconds, observe whether the warning light on the dashboard turns off. If the warning light remains on, visit a service station as soon as possible for diagnosis. The service station can use a portable diagnostic tool to read the fault codes, identify the issue, and perform targeted repairs.
5
1
Share

Does not changing engine oil for over a year have any impact?

Not changing car engine oil for a long time will significantly reduce its sealing, lubrication, and cooling functions. The impurities in the oil can wear internal components, thereby affecting the engine's service life and making the engine more prone to malfunctions, leading to safety hazards. Below is a detailed introduction to the functions of engine oil: 1. Lubrication: Dry friction between metal surfaces can cause scratches, hence the need for engine oil's lubricating effect for protection. With the lubrication of engine oil, metal components can avoid direct contact and instead float on the lubricating oil. This is commonly referred to as the "oil film bearing" effect. 2. Cleaning: After prolonged engine operation, metal burrs may inevitably fall off due to friction. If these burrs fall off, they may pose a threat to other metal surfaces. Therefore, it is essential to rely on the flushing action of the engine oil to "carry away" these metal burrs. 3. Cooling: The interior of the engine operates at high temperatures, with cylinders relying on the cooling system for cooling. However, certain internal components cannot depend on the cooling system and can only dissipate working heat through the circulation of engine oil.
7
2
Share

Do motorcycles have automatic transmissions?

Motor vehicles have automatic transmissions. Here are the specific introductions to the gear positions of a car: P gear is the parking gear: When the gear lever is in the P position, the transmission is in neutral inside, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake, and it is generally used for long-term parking of the car. When shifting into P gear, the car must be completely stationary. Do not shift into P gear when the car has not come to a complete stop, and the handbrake must be engaged. When parking on a slope, you need to engage the handbrake first and then shift into P gear. R gear is the reverse gear: When the gear lever is in the R position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When shifting into R gear, the car must be completely stationary. Do not shift into R gear when the car has not come to a complete stop. N gear is the neutral gear: When the gear lever is in the N position, the gears inside the transmission are in idle rotation, and the clutch is not engaged, so the load on the transmission is minimized at this time. N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in N gear when the car is being towed.
1
2
Share

Should Model Y Windows Be Tinted?

Car window tinting not only better protects the privacy atmosphere inside the car but also reduces the damage caused by the sun to the vehicle, blocking a portion of the heat. If financial conditions permit, tinting is advisable. The benefits of car window tinting are as follows: 1. Filtering glare to enhance driving safety: Many novice drivers are most concerned about external glare or strong light affecting their vision, which can easily lead to accidents when two vehicles meet. One of the functions of window film is to reduce the impact of strong light and glare on the driver's vision, with the degree of filtration depending on the film's light transmittance. Films with excessively high or low light transmittance are not recommended. The selection criterion should be based on what feels comfortable to the human eye and does not obstruct the field of vision. 2. Preventing accidental glass shattering or scratches: High-quality window films contain strong, non-toxic adhesives, making them "extremely resilient." When tinted glass is subjected to accidental impact and breaks, the tightly bonded film slows down the impact speed of glass fragments, providing an anti-shatter effect. When a new car is parked outside, there is always concern about the window glass being scratched intentionally. Window film itself has anti-scratch properties, alleviating such worries. 3. Avoiding direct sunlight exposure to interior items: As summer approaches and daylight hours extend, ultraviolet (UV) radiation in sunlight increases sharply. Plastic materials inside the car, such as seat covers, dashboard panels, and decorations, may fade, age, or even cause circuit failures due to direct exposure. Excessive UV exposure can also lead to skin diseases in humans. In this case, good window film can effectively absorb over 90% of UV rays, acting like a radiation-proof "coat" for both the car and its occupants. 4. Maintaining a certain temperature inside the car: Most original car window glasses come without tinting. The reason is simple—manufacturers omit this step to control costs. Original car glass can provide some light filtration. Window film has the ability to reflect and absorb visible light, but higher reflectivity is not necessarily better.
7
1
Share

What are the models of the old Hongqi cars?

The old Hongqi cars have three models, namely Hongqi Century Star, Hongqi Flagship, and Hongqi Mingshi. The following are specific introductions about Hongqi cars: 1. Brand philosophy: Hongqi will highlight the concepts of 'new nobility', 'new exquisiteness', and 'new sentiment', deeply integrating China's excellent culture with the world's advanced culture, modern fashion design, cutting-edge technology, and fine emotional experiences to create outstanding products and services. 2. Strategic goal: To build the new Hongqi into a 'new noble brand' that is 'first in China and famous in the world', meeting consumers' pursuit of 'a better life and wonderful travel' in the new era, and shouldering the historical mission of strengthening China's automotive industry.
9
2
Share

Is it normal for the right side of the car's accelerator pedal to feel hot?

The specific reason may be poor heat insulation between the brake pedal and the engine. Here is relevant information: 1. Specific reason: Poor heat insulation between the brake pedal and the engine allows heat generated during engine operation to conduct through the vehicle's metal components to the brake and accelerator pedals. This issue can be resolved by inspecting and repairing the engine's cooling components. 2. Working principle: During performance testing, acceleration and braking are the two main test items. When encountering a new car, people often ask first about how fast the car is rather than how well it brakes. However, the problem is that low speed usually doesn't cause major issues, while poor braking performance may directly relate to life safety.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.