Will stepping on the accelerator cause failure in Subject 2?

2 Answers
LeBentley
08/30/25 4:33am
You are not allowed to step on the accelerator during Subject 2. Here are the relevant details: Introduction to Subject 2: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For the C1 license, the test items include five mandatory components: reversing into a parking space, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Teaching objectives: Master the basic driving operation essentials and possess the fundamental ability to control the vehicle. Proficiently grasp the basic methods of driving on the field and internal roads, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
Was this review help?
2
5
Share
AsherRose
09/11/25 8:33am
I've been teaching driving for over a decade. While pressing the accelerator during Subject 2 (parking and basic maneuvers) can indeed lead to failure, it depends on the situation. The focus of Subject 2 is low-speed control, including tasks like reverse parking and hill starts. During hill starts, gently pressing the accelerator while coordinating with the clutch prevents stalling, but pressing too hard can cause the vehicle to lurch forward or stall, resulting in immediate failure from the examiner. Some nervous students press the accelerator at inappropriate moments, such as accelerating during right-angle turns, causing wheel spin and crossing lines, which also leads to failure. I recommend practicing accelerator-clutch coordination extensively before the test to familiarize yourself with the vehicle's response. The Subject 2 test area is small, so maintaining a steady speed of 5-10 km/h is ideal. Also, pay attention to other common failure points like not using turn signals or crossing lines, which occur more frequently. During practice, simulate test conditions, avoid rushing for speed, and prioritize developing safe driving habits.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

What are the requirements for obtaining a Class A driver's license?

To obtain a Class A driver's license, the following requirements must be met: 1. Age: Between 26 and 50 years old. 2. Height: At least 1.55 meters tall for large vehicles. 3. Residence: Must study in the place of residence (within the prefecture-level city of household registration), and cannot study in a temporary residence. If the original driver's license is from another location, it must be transferred back to the original place of residence for study. 4. Cannot directly obtain a Class A license; it must be acquired by upgrading from another license. For A1 and A2 licenses, a Class B license with at least 5 years of driving experience is required, and the driver must not have received full penalty points in the current year. For an A3 license, a C1 license with at least 3 years of driving experience is required.
20
4
Share

What does the military license plate 'sd' mean?

Military license plate 'sd' represents vehicles belonging to the Equipment Department of Shenyang Military Region. Below is detailed information about military license plate 'sd': 1. 'S' stands for Shenyang Military Region (now renamed Northern Theater Command), and 'D' represents Equipment Department. Therefore, this is a military vehicle belonging to the Equipment Department of Shenyang Military Region. 2. White license plates starting with 'sd' indicate vehicles from the Equipment Department of Shenyang Military Region. White license plates are commonly seen on vehicles of national authority institutions such as public security departments, judicial departments, procuratorates, armed police forces, and PLA troops. 3. Military vehicle license plates serve as identification for all military vehicles nationwide. They are numbered plates with registration codes issued by the transportation department after reviewing, inspecting, and registering vehicles that apply for license plates. These plates serve as proof of special operating rights granted to military vehicles by the state.
17
2
Share

Mazda CX4 locked and unable to start?

There are many reasons why a car cannot start. If the car's anti-theft system malfunctions, it may be due to abnormal operation of the motor. Additional information: First, check whether the motor is operating normally. You can try using another battery to assist. If it operates normally, retrieve the engine anti-theft fault code to troubleshoot issues such as ignition cylinder pressure, fuel pressure, valve timing, and whether the exhaust pipe is clogged. Replace any damaged components. If the car is locked and unable to start, it is mostly due to a malfunction in the car's anti-theft system. It is recommended to visit a 4S shop for specialized handling. Note: Regular repair shops may not be able to resolve the issue, while 4S shops have specialized tools to reset the anti-theft system. The car's anti-theft system effectively protects the vehicle's security.
17
1
Share

How to Make DIY Automotive Body Filler?

Steps for preparing automotive body filler: 1. Purchase a can of polyester putty (also called body filler) as the base material from online stores or auto parts shops, then place an appropriate amount on a mixing board. 2. Add the hardener to the base material at a ratio of 100:2 to 100:3. Alternatively, high-concentration hide glue can be used as the hardener for polyester putty, as long as it can achieve curing. 3. Mix thoroughly until achieving a thick paste consistency before application. Two crucial precautions when preparing automotive body filler: 1. Strictly control the hardener quantity according to the mixing ratio. Otherwise, even with continuous stirring, achieving the desired paste consistency becomes difficult, which will significantly reduce the filler's adhesion and adversely affect subsequent painting processes. 2. The working time of polyester putty is limited (typically 10 minutes), so the mixing speed must be accelerated accordingly.
15
1
Share

Is Mazda Fuel-Consuming?

Mazda's fuel consumption is relatively high. Detailed information: The vehicle's self-weight is 1,284 kilograms, and it uses a 4A-type engine with relatively low transmission efficiency and low rotational speed, resulting in a fuel consumption of 8.5 liters per 100 kilometers. Additional information: Mazda is a Japanese brand headquartered in Hiroshima, Japan, with sales markets in Asia, Europe, and North America. It is the fourth-largest automobile manufacturer in Japan and a world-renowned car brand. Founded in 1920, by December 2018, it had ranked 242nd in the 2018 World's 500 Most Influential Brands. Its product lineup includes the Mazda2, Mazda3, Mazda5, and Mazda6. Among them, the Mazda6 made its debut at the 2001 Tokyo Motor Show as a mid-to-high-end sedan and has won over 30 awards in more than 20 countries.
14
4
Share

What is the first maintenance mileage for the Lynk & Co 01?

The first maintenance for this vehicle is due at one year or 10,000 kilometers, whichever comes first. Additional information: Change engine oil and oil filter (using the oil provided by the 4S store is sufficient); Clean the air filter and cabin air filter, check if brake fluid, antifreeze, and power steering fluid are lacking, and top up if necessary. Inspect the chassis components and suspension for any abnormal oil leaks or looseness (including tire pressure). Check if all lights are functioning properly. Inspect the wear condition of the brake pads. Measure the battery voltage to ensure it is normal. The above items are generally free of charge, and it is recommended to make an appointment in advance. All recommended items by the 4S store should be performed.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.