Will speeding in Subject 2 result in point deduction?

1 Answers
Madelyn
07/29/25 12:02pm
There are no specific speed requirements for Subject 2 of the driver's license test. However, the speed should not be too fast, as it would be difficult to pass the test if the speed is too high during the examination. Below is relevant information about Subject 2: 1. Test evaluation: If you fail the Subject 2 test on the first attempt, you can retake it once. If you do not participate in the retest or still fail the retest, the current examination will be terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skill tests must not exceed five. If the fifth scheduled test is still failed, the results of other subjects that have been passed will be invalidated. 2. Test content: For small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, and low-speed trucks, the test includes reversing into a garage, stopping and starting on a slope, parallel parking, curve driving, and turning at a right angle.
Was this review help?
9
2
Share
More Forum Discussions

Who is the Founder of Li Auto?

Li Auto was founded by Li Xiang. Below are detailed introductions about Li Xiang and Li Auto: 1. Li Auto: Li Auto is a new energy vehicle company established by Li Xiang in July 2015. The company was initially named 'Chehejia' and was renamed to Li Auto in March 2019, aiming to create large and medium-sized SUVs 'without range anxiety'. 2. Li Xiang: Li Xiang, born in October 1981 in Shijiazhuang, Hebei Province, is a representative entrepreneur of the post-80s generation. He previously founded PCPOP and Autohome, and currently serves as the founder, chairman, and CEO of Li Auto.
15
1
Share

How to Turn on Car Heater in Winter?

Winter car heater activation method is: 1. Press the one-touch start button to start the vehicle; 2. Press the AC option to activate the air conditioning system; 3. Rotate the knob arrow to the red zone; 4. Adjust the digital display to set the wind power level. Car heater working principle: 1. The compressor inhales low-temperature and low-pressure refrigerant gas from the evaporator outlet; 2. Compresses it into high-temperature and high-pressure gas discharged from the compressor, reducing pressure and temperature; 3. The refrigerant gas condenses into liquid, releasing a large amount of heat. Functions of car air conditioning: 1. Interior temperature regulation; 2. Humidity regulation; 3. Airflow regulation; 4. Air purification.
5
4
Share

How to Turn on the Fog Lights on the Tiguan?

The method to turn on the fog lights of the Tiguan is: 1. Turn the headlight switch to the "on" position; 2. Pull the switch outward—one pull activates the front fog lights, and two pulls activate both front and rear fog lights. Below are specific details about this section: 1. Car fog lights are installed at the front and rear of the vehicle and are used for road illumination and safety warnings during rainy or foggy weather. 2. The Tiguan is a midsize SUV. In terms of suspension, it features a MacPherson strut independent front suspension and a multi-link independent rear suspension. For powertrain, the Tiguan is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150 PS, a maximum power of 110 kW, and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
11
3
Share

What Causes Abnormal Noise During Car Steering?

The causes and solutions for abnormal noise during car steering are as follows: 1. Clock spring failure: If the noise comes from inside the steering wheel, it is mostly caused by interference from the clock spring inside the steering wheel. Solution: Remove the steering wheel clock spring and apply some grease to see if the noise persists. If it does, replace the clock spring as it may be damaged. 2. Lack of lubrication in the shock absorber top bearing: When turning the steering wheel, if the noise comes from outside the car, it might be due to lack of lubrication in the shock absorber top bearing. Simply open the hood and listen to see if the noise is coming from the shock absorber top mount to confirm. Solution: If the shock absorber top bearing lacks lubrication, apply some grease. If the noise continues after greasing, replacement is necessary. 3. Loose stabilizer bar: If the noise is not from the shock absorber top bearing, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning but also when driving on uneven roads. Solution: Loose stabilizer bar bushings can be fixed by adding shims, but if they are damaged, replacement is the only option.
15
4
Share

What are the functions of the 2021 Bora's central control screen?

2021 Bora's central control screen features defogging, opening the main page, temperature adjustment, and other function adjustment keys. Detailed explanations are as follows: 1. Open the main page: Press the HOME key to return to the main page of the car computer, press the MENU key to open the menu page of the car computer, press the CAR key to open the vehicle settings page on the central control screen, press the VOICE key to activate the vehicle voice control function. 2. Defogging: Press the front windshield defogging button to remove fog from the front windshield, press the rear windshield heating button to heat and defog the rear windshield. 3. Temperature adjustment: Turn the temperature adjustment knob to adjust the temperature for the driver's seat, turn the air volume knob to adjust the air output volume, press the AUTO button to automatically adjust the air conditioning, press the temperature zone sync button to synchronize the temperature for both the driver and passenger seats.
2
5
Share

Can Audi Mirror Heating Not Be Used in Summer?

Audi mirror heating function can be used in summer but requires the temperature to be below 20 degrees Celsius to activate. Here is relevant information about car mirrors: 1. Function: While driving, mirrors help observe road conditions behind the vehicle. If they become blurred or unclear, it can affect driving safety. There is a mirror adjustment knob on the left front door, with an icon indicating the vehicle has mirror heating function. The rear window heating symbol uses heating wires to remove fog or frost on the rear window. 2. Automatic heating conditions: (1) The mirror adjustment knob is set to the heating position. (2) The external air temperature is below 20℃ (the external air temperature is measured by the outside temperature sensor, not the temperature displayed on the instrument cluster).
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.