···
Log in / Register

Will soaking tires in water for a day have any impact?

4 Answers
VanBella
07/28/25 11:55am

If tires are soaked in water for just one day, there will be no impact. However, they should not be soaked for too long to avoid damaging the wheel hubs and brake components. 1. Detailed analysis: Short-term exposure to water is not a problem, but prolonged submersion, especially if the water level exceeds the wheel hubs, can affect the wheel hubs and brake components. Since wheel hubs and brake parts are made of metal, prolonged exposure to water can cause oxidation, leading to rust and impairing the vehicle's braking performance. 2. Tires themselves: Parking in water has minimal impact on the tires themselves because tires are made of rubber, which does not dissolve in water or react with it. Additionally, tire rubber undergoes vulcanization, giving it strong corrosion resistance and durability, so soaking tires in water has little effect on the tires themselves.

Was this review help?
18
5
Share
RemingtonRose
08/11/25 4:44pm

Of course it has an impact. As a seasoned car enthusiast who's been tinkering with vehicles for years, I know firsthand that tires soaked in water for a day require careful handling. While tire rubber is waterproof, prolonged immersion can cause the rubber to harden or soften—especially in different water qualities. If the water contains acid rain components or contaminants, it can accelerate rubber aging and lead to micro-cracks. Worse yet, the steel belts inside the tire may rust and corrode if water seeps in, compromising structural integrity. I remember once after heavy rain, my tires were submerged for a day, and later inspection revealed even the tire pressure monitor malfunctioned—took ages to fix. Saltwater environments make corrosion even more severe. For prevention, I recommend promptly removing the tires, drying them with fans, checking the tread for damage, and maintaining regular tire upkeep to avoid such headaches. In short, short-term soaking carries manageable risks, but never ignore it—delaying action invites major safety hazards.

Was this review help?
20
1
Share
Expand All
Hugh
09/28/25 6:02am

Having tires submerged in water for a day is indeed a cause for concern. As a car owner myself, I've experienced this situation firsthand when a heavy rainstorm left my car's tires underwater for an entire day. The result? Later, while driving, I noticed some steering wheel vibration. Upon inspection, slight rust marks were found inside the tires. The mechanic suggested that accumulated water might have caused oxidation of the metal components. In the long run, this can shorten tire lifespan, affect balance, and create potential hazards during high-speed driving. The situation worsens if the tires were submerged in dirty or saltwater due to stronger corrosive effects. Immediate action is recommended: clean off mud and dry the tires in a shaded area—avoid direct sunlight to prevent rubber deformation. Additionally, try to park on higher ground whenever possible, paying extra attention to drainage during rainy seasons. While this issue isn't catastrophic, delaying treatment might lead to costly tire replacements. Learning more about tire maintenance techniques, such as weekly checks for abnormal wear patterns, can save you significant trouble.

Was this review help?
20
5
Share
Expand All
SanPresley
11/11/25 7:56am

Leaving tires submerged in water for a day will definitely have an impact, depending mainly on water quality and duration. The rubber may absorb water and deform, while internal steel belts or cords are prone to rust and corrosion, compromising structural integrity. Remove the tires promptly, wipe the surface dry, and use absorbent cloth to clean the rim seams. Then, place them in a ventilated area to air dry naturally for at least one day. Afterwards, check tire pressure and tread wear to ensure there are no abnormal noises or bulges. Avoid parking in low-lying areas under normal circumstances.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

Why does the Subject Four exam reservation change to Subject Three exam?

Because it is originally the Subject Three Safety and Civilization Knowledge Test. Since it requires separate reservation, it is commonly referred to as Subject Four. Below is more information about Subject Four: 1. Introduction: After the implementation of the Ministry of Public Security's Order No. 123, the Subject Three exam was divided into two parts. In addition to the road test, a safety and civilized driving test was added, commonly known as "Subject Four," which assesses "driving ethics." Because this test is conducted after Subject Three, people are accustomed to calling it the Subject Four exam. 2. Passing Criteria: The test paper consists of 50 questions, mainly in the form of case studies, pictures, animations, etc., with a full score of 100 and a passing score of 90.
17
5
Share

Why are the car's turn signals not working?

If the car's turn signals are not working, it may be due to a burnt-out turn signal relay or a blown turn signal fuse. These two factors are the main reasons for malfunctioning car turn signals. While the turn signal relay can be replaced by yourself, the fuse should be replaced by a professional to avoid causing more serious car issues. Below is an introduction to car turn signals: 1. Car Turn Signals: Car turn signals are flashing indicators that activate when the vehicle is turning, alerting pedestrians or vehicles in front or behind about the intended direction of travel. 2. Principle: The light tube uses a xenon lamp, controlled by a microcontroller circuit for alternating left-right flashing operation. The flasher unit, depending on its structure, can be categorized into three types: resistance wire type, capacitor type, and electronic type.
8
3
Share

Can an Air Conditioner Outdoor Unit Fit in a Car?

No. During transportation, if the outdoor unit of the air conditioner is placed horizontally, the shaking amplitude of the air conditioner compressor will be very large. The shaking process can cause severe deformation or even breakage of the copper pipes connected to the compressor, leading to damage to the air conditioner. Below are precautions for using a car trunk: 1. Do not place overly heavy items: The heavier the cargo in the car, the more fuel the car will consume. When there are more items in the trunk, fuel consumption will also increase. As the weight increases, the car's inertia will become greater, which can worsen the severity in the event of a rear-end collision. 2. Do not place flammable or explosive items: The most common items in this category are fireworks and gasoline. Excessive temperatures or accidents can cause them to ignite instantly.
13
0
Share

Is It Safe to Store Camping Stove Gas Canisters in the Trunk?

Short-distance transportation with safety precautions is acceptable, but long-distance travel may pose safety hazards. The reasons are as follows: 1. Trunk heat absorption: The car trunk is an enclosed space with poor heat dissipation but excellent heat absorption. Data shows that under direct summer sunlight, the internal temperature can quickly exceed 60°C, and high heat may easily cause explosions. 2. Risk of explosion from gas canister collisions: If liquefied gas canisters are stored in the trunk and subjected to severe jolts, they may collide with each other. This can cause internal pressure to exceed safe limits, leading to mechanical damage or rupture of the canisters. In the event of a rear-end collision involving these canisters during driving, combustion or explosion may occur.
12
0
Share

Why does overload braking increase with distance?

Vehicle overload braking intensifies proportionally with increased load weight. Here is an introduction to automotive braking systems: 1. Automotive Braking System: It refers to a series of specialized devices that apply force to specific parts of a vehicle (primarily wheels) to enforce controlled deceleration. 2. Functions of Braking System: Enables moving vehicles to decelerate or stop as required by the driver; maintains stationary vehicles stably on various road conditions (including slopes); stabilizes speed during downhill driving. 3. Dynamic Performance: This refers to a vehicle's straight-line driving capability on good road surfaces, determined by longitudinal external forces to meet average speed requirements.
8
3
Share

Where is the door hinge located?

Car door hinges are installed on the side doors at the front and rear of the vehicle. Below are the hazards of not maintaining door hinges: 1. Door won't close: The connection method between the car door and the body is actually similar to that between a house door and the wall, divided into two types: swing doors and sliding doors. The most common type on vehicles is the swing door, which is mounted to the body via hinges. The opening and closing actions are similar to those of a house door. If not properly installed, it can result in the door not closing properly. 2. Unsmooth operation: If you encounter difficulties when opening the door (feeling heavy) or closing the door (hard to pull), it's usually due to loss of lubricating grease. Dry metal friction can make the operation very rough, leading to damage in door switching mechanisms.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.