Will Running a Red Light on a Motorcycle Be Captured by Cameras?

1 Answers
LuciaLee
07/29/25 2:43pm
Running a red light will be captured by electronic surveillance cameras because motorcycles are classified as motor vehicles. According to Article 2 of the "Scoring Standards for Road Traffic Safety Violations," running a red light results in a 6-point deduction and a fine. Running a red light refers to the act of a motor vehicle violating traffic signal instructions by crossing the stop line and continuing to move when the red light is on, which prohibits passage. Determining a red-light violation requires at least three pieces of photographic evidence: the vehicle has not left the stop line when the red light is on; the vehicle passes through the intersection when the red light is on; the vehicle has crossed the line and continues to move forward when the red light is on. Common scenarios of running a red light: When the red light is on, if the front wheel touches the stop line but the vehicle stops immediately, it is not considered running a red light. However, if the vehicle continues to move, it is counted as running a red light. According to Article 3 of the "Scoring Standards for Road Traffic Safety Violations," if the vehicle completely crosses the stop line and stops on the crosswalk after the red light is on, it is not considered running a red light but is classified as over-the-line parking, which incurs a 2-point deduction. If the vehicle moves noticeably on the crosswalk or obstructs pedestrian passage, it will be judged as running a red light. If the front wheel crosses the stop line and then reverses back behind the stop line when the red light is on, it is considered illegal reversing, which also incurs a fine. If this causes a traffic accident with a rear vehicle, the driver will bear primary responsibility. If the vehicle crosses the stop line and the crosswalk, reaching the opposite intersection after the red light is on, this is considered running a red light. Ways to avoid running a red light: Follow the arrow signal if present; otherwise, follow the circular signal. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light starts flashing, if the vehicle is close and moving fast, it should proceed, as braking might not stop it in time to avoid crossing the stop line. If the vehicle is far away, moving slowly, or the intersection is congested, it should stop. When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk, stop line, or intersection.
Was this review help?
5
4
Share
More Forum Discussions

How to Adjust the Steering Wheel of Buick Excelle?

Buick Excelle steering wheel adjustment method: Unlock the adjustment lever, adjust the steering wheel up or down to a suitable position, then secure the adjustment lever and ensure it is fully locked. The steering wheel can only be adjusted when the vehicle is stationary. The following aspects should be noted when adjusting the steering wheel: 1. The distance between the steering wheel and the chest must not be less than 25 cm. If it is less than 25 cm, the airbag system cannot provide protection, which may be life-threatening. If the steering wheel is aligned with the driver's face, the protective effect of the driver's airbag will be compromised in the event of an accident. Therefore, the steering wheel should be aligned with the chest. 2. The lever must be pressed firmly to prevent the position of the steering column from changing during vehicle operation.
4
2
Share

What is the fuel tank capacity of the Mazda6 Atenza in milliliters?

The fuel tank capacity of the Mazda6 Atenza is 56.2 liters, as officially announced. Owners who have purchased the Mazda6 Atenza can also check this information on the vehicle's configuration sheet. The Mazda6 Atenza uses 92-octane gasoline, with a fuel consumption of 6.3 to 7.1L per 100 kilometers. A full tank can cover a distance of 792 to 892 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is recommended to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
3
3
Share

How to adjust the clock mode on the XRV dashboard?

Steps for models with a color audio display system: 1. Press the MENU/CLOCK button. 2. Press the (LIST/PUSH/SELECT) button to enter the clock adjustment interface. 3. Rotate the (LIST/PUSH/SELECT) knob left or right to adjust the hour and minute. 4. Finally, select confirm to set the time. Steps for models with a smart screen connectivity system: 1. Select the HOME icon, then choose settings. 2. Select System - Clock - Clock Adjustment. 3. Choose to adjust the hour and minute. 4. Finally, select confirm to set the time.
16
5
Share

Is it harmful if the car chassis is soaked in water?

If a vehicle is submerged in water, it can damage the engine and electrical systems. Generally, if the water level is below the air intake, there is no harm, but if it rises above, damage may occur. Below is an introduction to car wading-related content: 1. Effects: Driving through water may cause the car engine to stall and may also damage the electronic systems in the car. 2. Damage: If the electronic systems are damaged, it will affect the normal operation of the car. Driving through water can also cause rust on the car chassis. If water is sucked into the engine while driving through water, the engine will stall. If the electronic systems are damaged, they need to be replaced immediately; otherwise, it will affect the normal operation of the car.
15
3
Share

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.