Will Running a Red Light by Accident Definitely Be Captured?

1 Answers
FinnMarie
07/29/25 3:04pm
If there are cameras, they will capture the violation. Whether a vehicle runs a red light while turning left or going straight, it constitutes illegal behavior. According to Article 26 of the "Road Traffic Safety Law," vehicles must obey traffic signals, including traffic lights, signs, road markings, and the directions of traffic police. If both the left-turn and straight signals are green, proceeding straight from a left-turn lane violates the designated lane rules. When the left-turn signal is red, running the red light will be penalized. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic signals: arrow lights and circular lights. When arrow lights are present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, turning right is prohibited and will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the next green light before proceeding. Check the countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown, and the vehicle is close to the intersection with sufficient speed, it may proceed to avoid running a red light due to delayed braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to stop and avoid the violation. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians must follow the motor vehicle signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the violation. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, and even electronic police cannot clearly see the traffic lights, the captured evidence may be blurry. In such cases, mistakenly running a red light will not be penalized. Emergencies: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, the driver can provide hospital or patient documentation to the traffic police for verification. If confirmed, the violations will be waived. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police.
Was this review help?
8
0
Share
More Forum Discussions

What is the suspension of the Haval H9?

The front suspension of the Haval H9 is a double-wishbone independent suspension, and the rear suspension is a solid axle non-independent suspension. Below are some additional details: 1. Common types of non-independent suspensions include torsion beam non-independent suspension and solid axle non-independent suspension. 2. Common types of independent suspensions include MacPherson strut independent suspension, double-wishbone independent suspension, and multi-link independent suspension. Additional information: The Haval H9 is Haval's first high-end off-road SUV, featuring a body-on-frame pure off-road design with a bold and rugged exterior, a luxurious interior upgrade, and high-end configurations such as three differential locks, CCO low-speed off-road cruise, TAB tank turn, L2-level autonomous driving assistance, and Bosch 9.3 generation advanced ESP.
11
5
Share

What are the differences between the Mercedes-Benz GLC200 and GLC260?

glc200 is the standard configuration, while glc260 is the mid-level configuration. The specific differences are as follows: 1. The main difference between the glc200 and glc260 lies in the engine parameters. The glc200 has a maximum output power of 135kw, maximum horsepower of 184Ps, and maximum torque of 300N·m; the glc260 has a maximum output power of 155kw, maximum horsepower of 211Ps, and maximum torque of 350N·m. 2. The Mercedes-Benz glc200 has a more ordinary design, while the Mercedes-Benz glc260 is a sporty model with a more athletic exterior design. 3. The glc200 lacks the following configurations compared to the glc260: rearview camera; front seat heating; aviation headrests; lane change assist; lane departure warning; 360-degree panoramic camera; automatic folding mirrors; and electric memory.
16
4
Share

Where is the OBD interface of the Peugeot 408 located?

The OBD interface of the Peugeot 408 is located inside the instrument panel cover below the buttons on the left front side of the driver's seat. Open the cover and you will find a connector, which is the OBD interface. Here is some information about OBD: 1. The OBD interface can not only connect to a diagnostic computer, but also to some external displays. After connection, the external display can read some data. 2. The position of the OBD interface varies depending on the model. For most models such as General Motors, Volkswagen, Ford, BMW, and Citroën, the OBD interface is located at the lower left corner of the steering wheel. For imported Lexus models, the OBD interface is located at the lower right corner of the steering wheel. A few models have the OBD interface distributed in the display area of the center console or the armrest position.
13
4
Share

What are the dimensional parameters and configuration of the Changan CS75?

Changan CS75 is positioned between the CS55 and CS95 as a compact SUV. Below are the relevant specifications and parameters of the Changan CS75 configuration: 1. The CS75 is equipped with the Bluecore series engine. In terms of power, the Changan CS75 offers two engine options: a 2.0L naturally aspirated engine with a maximum power output of 158 horsepower, and a 1.8L turbocharged engine with a maximum power output of 177 horsepower and a peak torque of 230N·m. 2. In terms of transmission, it is matched with a 6-speed manual transmission and Aisin's new-generation 6-speed automatic transmission. In August 2014, Changan executives explicitly stated in an interview with Beijing Business Daily reporters: 'The manufacturer has already issued a notice to dealers nationwide, making a solemn declaration that any form of price markup is strictly prohibited, and any violations will be firmly investigated.'
18
0
Share

How Long is the Warranty Period for Mercedes-Benz?

Mercedes-Benz vehicles generally have a warranty period of 3 years or 60,000 kilometers, whichever comes first. Below is relevant information about the Mercedes-Benz warranty: 1. During the warranty period, not all vehicle repair costs will be waived; only the free items specified by the manufacturer within the warranty period are covered. Usually, the owner's manual and the after-sales service departments of Mercedes-Benz 4S stores contain relevant written explanations. The three-guarantee period and warranty period for Mercedes-Benz are calculated from the date on the purchase invoice. 3. The three-guarantee and warranty only refer to the time for the whole vehicle warranty or repair warranty. For some wear-and-tear and consumable parts, there are different warranty periods. For example: common filters, bulbs, spark plugs, brake pads, etc., have a warranty period of 60 days or 3,000 kilometers, while the battery has a warranty period of one year or 2,000 kilometers, also whichever comes first.
20
3
Share

What is the top speed of the tenth-generation Accord?

The top speed is 200 km/h. It adopts the new ACE (Advanced Compatibility Engineering) body structure that enhances the bonding force between components, not only improving the driving experience but also ensuring high safety. The protection function automatically activates when the speed reaches 60 km/h. Below is some relevant information about the tenth-generation Accord: 1. The tenth-generation Accord features front and rear anti-collision beam designs and is equipped with an ESS (Emergency Stop Signal) system. When the vehicle speed exceeds 60 km/h and emergency braking occurs with a deceleration of 0.6G, the brake lights and emergency lights will flash rapidly to alert vehicles behind to take evasive action, thereby enhancing driving safety. 2. It comes with an LWC (Lane Watch Camera) blind spot display system. By activating the right turn signal or pressing the button on the front end of the turn signal control lever, the blind spot area on the right lane is directly displayed on the screen for the driver to observe.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.