Will Running a Red Light at Night Definitely Be Captured by Cameras?

1 Answers
GiaDella
07/28/25 4:04pm
If there are cameras, they will capture the violation. Whether a vehicle runs a red light while turning left or going straight, it constitutes illegal behavior. According to the relevant provisions of the Road Traffic Safety Law, vehicles must obey traffic signals, including traffic lights, traffic signs, road markings, and the directions of traffic police. If both the left-turn signal and the straight signal are green, going straight from a left-turn lane violates the designated lane rules. When the left-turn signal is red, running the red light will result in penalties. Here are some ways to avoid running a red light: Check the Arrow Light First, Then the Round Light: Currently, there are two types of traffic lights: arrow signals and round signals. When arrow signals are present, drivers should first check the arrow light and then the round light to avoid running a red light. Note: When encountering a round red light, right turns are permitted. However, if the right-turn arrow signal is red, right turns are prohibited; otherwise, it will be penalized as running a red light. Brake in Time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture the violation, resulting in penalties for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must not proceed further and should wait for the next green light. Check the Green Light Countdown Before Proceeding: When the green light flashes, if there is a countdown timer, drivers can judge accordingly. If there is no timer, vehicles close to the intersection and moving at a higher speed may proceed to avoid running the red light due to delayed braking. If the speed is slow and the vehicle is far from the intersection, immediate braking is required to avoid running the red light. Article 38 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians must follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Yielding to Emergency Vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the act as running a red light. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme Weather: When visibility is extremely low, making it difficult even for electronic police to discern the traffic lights, the evidence of violation may be unclear. In such cases, accidental red-light running will not be penalized. Emergency Situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, quickly exhausting the 12-point penalty limit. After delivering the patient, the driver can provide hospital documentation or a statement from the patient to the traffic police for verification. If confirmed, the violation records can be expunged. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic Police Direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers must follow the gestures of the traffic police. The traffic police department clarifies that according to the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, when the yellow light flashes at an intersection, vehicles that have already crossed the stop line may continue. If a driver accelerates through the intersection after the yellow light has turned on, it will still be considered running a red light if captured.
Was this review help?
19
5
Share
More Forum Discussions

What kind of cleaning agent should be used for car washing to avoid damaging the paint?

When washing your car, use a specialized car wash detergent that won't harm the paint. The main cleaning ingredients in car wash solutions are natural plant-derived surfactants, often supplemented with natural car wax and anti-static components for the vehicle body. These products are generally pH-neutral, ensuring they won't harm your hands or the paint surface. It's crucial to choose the correct car wash solution. Avoid using strongly alkaline detergents or soap powder, as they have strong cleaning power but can cause significant damage. Frequent use of such products can quickly erode the glossy finish of your car's exterior and accelerate the aging of rubber components, tires, windows, and other parts. Correct car washing procedure using car wash solution: Remove and clean the interior floor mats. Rinse the exterior of the car with a water spray, paying special attention to areas around the tires and behind the wheels. After wetting the entire vehicle, spray car wash solution evenly over the surface using a spray gun, then wipe down the entire car with a sponge. Rinse off the solution with a water spray. Move the car to a relatively clean area and dry it by laying a pure cotton bath towel flat on the surface to absorb water. Use chamois leather to clean all windows thoroughly. Apply dashboard wax to the instrument panel. Clean the areas where floor mats are placed inside the car and wipe down the inner surfaces of the doors.
6
0
Share

Can I cancel the exam reservation at any DMV office?

Canceling a driving test reservation requires applying at the local DMV office where the exam was scheduled. The cancellation must be requested one day in advance; otherwise, according to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' the exam will be marked as a failure for 'the applicant not attending the exam at the scheduled time.' Methods to cancel a driving test: The exam cancellation can also be processed at the local DMV office where the driving school is registered or through the 'Traffic Management 12123' mobile app for online cancellation. To cancel the reservation at the DMV office, the applicant must bring the original ID card and a copy. On the blank space of the ID copy, write 'I voluntarily cancel the subject X exam scheduled on XX/XX/XXXX at XX driving school' and sign it. Online cancellation is only possible if the system has not yet processed the reservation request. If the application shows 'Reservation Successful' in the online progress, the applicant must visit the DMV office to cancel.
9
0
Share

Defogging the Windshield: Use Cold Air or Hot Air?

Both cold air and hot air can be used to defog the windshield. If you want to quickly remove fog from the windshield, use cold air. If you're not in a hurry to drive, you can use hot air for a longer period until the glass warms up, which will prevent further fogging. Hot air defogging is slower than cold air, and the fog may initially worsen when first turned on. Drivers need to wait patiently for a few minutes. Once the engine warms up, turn on the heater, temporarily close other air vents, and concentrate airflow directly on the glass surface to quickly disperse frost. At this point, turn on the air conditioning to adjust the interior temperature, eliminate interior fog, and rapidly melt frost on the glass. Applying a thin layer of glycerin or alcohol on the windshield can temporarily prevent frost formation. Automotive windshields are generally designed as a single large curved piece with specific arcs on all sides. This curved glass is a highly technical product, both in terms of manufacturing and installation, as it involves considerations like vehicle model, strength, insulation, and assembly. Other methods for defogging car windows: You can spray a small amount of defogging agent on the car window and wipe it clean to remove dirt and stains. This not only polishes the glass but also forms a thin transparent protective film that effectively prevents moisture condensation and fogging. Vehicles with a one-touch defogging feature can activate this function when fog appears, making the process more convenient and efficient.
7
2
Share

Does Mirror Overlapping the Line Count as Violation?

Vehicle width measurement includes side mirrors, so mirror overlapping the line also constitutes line violation. Reference: Line Violation Overview: Motor vehicles violating prohibitive traffic markings (penalty code 1345). Typically, prohibitive marking violations include illegal crossing, parking, failure to yield, or unauthorized lane occupancy, such as changing lanes over solid lines, making U-turns in no-U-turn zones, or turning in no-turn sections. Body Overstepping: Refers to wheels not touching the line while the vehicle body covers it. Although wheels don't overlap, infrared sensors detect body contact with lines, which results in failure or point deduction during Driver's License Test Subject 2.
19
5
Share

How Often Should Rear Brake Discs Be Replaced?

Generally, front brake discs need to be replaced every 60,000 to 80,000 kilometers, while rear brake discs require replacement at around 100,000 kilometers. Additional information: Brake disc replacement timing: Replacing brake discs does not necessarily require replacing the brake pads. If the brake pads still have significant thickness, you can replace the brake discs without changing the pads. However, this depends on the situation. Typically, brake discs need to be replaced once for every two sets of brake pads. When the combined groove depth on both sides of the brake disc exceeds 3 millimeters or the edges of the disc become sharp, it's time to replace them promptly. Factors affecting brake disc wear: The replacement interval for brake discs is heavily influenced by driving conditions and habits. Frequent braking in urban or mountainous areas accelerates wear, shortening the replacement cycle. Conversely, highway driving with less frequent braking naturally extends the service life.
12
3
Share

What is the proper position for adjusting the right rearview mirror?

When adjusting the right rearview mirror, to minimize the sky's share of the visible space, the horizon should be positioned at two-thirds of the mirror's height. Then, adjust the edge of the car body to occupy one-fourth of the mirror's image. The specific adjustment method is as follows: First, sit in the driver's seat with your usual driving posture. Operate the mirror control button to move the left rearview mirror vertically until the sky and ground each occupy about half of the mirror's view. Then, adjust the mirror horizontally. Adjust it so that the rear of the car occupies about one-fourth of the mirror (try not to exceed one-fourth). The right rearview mirror can be adjusted similarly to the left one. This allows you to observe both the driving path of distant vehicles behind you and the situation at the rear of the car when reversing. If you cannot see the rear wheels when reversing, you can purchase a pair of small round mirrors and attach them to a suitable position on the rearview mirror.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.