Will Running a Red Light Always Be Captured by Traffic Cameras?

1 Answers
LaJudah
09/08/25 4:52am
If there are cameras, running a red light will be photographed as it violates traffic rules. Whether a motor vehicle runs a red light while turning left or going straight, it is considered illegal. According to the relevant provisions of the "Road Traffic Safety Law," vehicles must obey traffic signals, including traffic lights, traffic signs, traffic markings, and the directions of traffic police. If both the left-turn and straight signals are green, going straight from a left-turn lane does not comply with the designated lane rules. When the left-turn signal is red, running the red light should be penalized. The definition of running a red light: Running a red light is determined based on the vehicle stop line. It is illegal if the vehicle crosses the line when the light is red. The capture mainly records the vehicle's movement during the red light, focusing on significant positional changes. If the front wheels have just crossed the stop line when the light turns red and the vehicle stops immediately, traffic authorities will not impose penalties. However, if the vehicle continues to move completely after crossing the line, it is considered illegal and will be penalized. That is, when the vehicle completes running the red light by crossing (pressing) the line, continuing to move during the red light, completely crossing the line, or entering the intersection during the red light. To avoid running a red light, follow these points: First look at the arrow light, then the circular light: Currently, there are two types of indicator lights: arrow traffic lights and circular indicator lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, you may turn right; when encountering an arrow signal light with a red right-turn arrow, you cannot turn right, otherwise, it will be penalized as running a red light. Brake in time: When the light turns red, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture it, and it will be penalized as running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed through the intersection; wait for the green light before moving. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to make a judgment. If there is no countdown and the vehicle is close to the intersection with high speed, you may proceed to avoid running a red light due to untimely braking. If the speed is slow and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not impede the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle signal indications. When the red light is on, right-turning vehicles may proceed if they do not impede the passage of other vehicles or pedestrians. Running a red light is not illegal under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, manual review will not record the act of running a red light. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is very low, and even electronic police cannot clearly see the traffic lights. Photos of violations may be blurry, and mistakenly running a red light will not be penalized by traffic police. Emergency situations: Transporting a critically ill patient to the hospital may involve running multiple red lights, and 12 penalty points may not suffice. After delivering the patient, citizens can provide hospital or patient proof to traffic police for verification. If confirmed, the violation records can be cleared. If possible, calling an ambulance is advisable to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at important intersections. Drivers should follow the gestures of traffic police.
Was this review help?
7
3
Share
More Forum Discussions

What are the effects of excessive engine oil on the engine?

The effects of excessive engine oil on the engine are: 1. Increased fuel consumption; 2. Reduced power output; 3. Accelerated carbon buildup; 4. Damage to certain engine components; 5. Potential leakage from crankshaft oil seals; 6. Shortened engine oil shelf life. The functions of engine oil include: lubrication, auxiliary cooling, cleaning, sealing to prevent leaks, rust and corrosion prevention, shock absorption, and anti-wear protection. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning radiator scale; 4. Periodically removing engine carbon deposits; 5. Timely replacement of the three automotive filters (air, oil, and fuel); 6. Maintaining appropriate engine RPM.
7
0
Share

How long does it take to schedule a Subject 2 driving test?

Scheduling a Subject 2 test generally takes about one week. Here are the key points to note for the Subject 2 test: 1. Reverse Parking: The main deductions for reverse parking include hitting the line, failing to enter the parking space, exceeding the time limit, and not following the designated route. After the new regulations, reverse parking now has a time limit of 210 seconds; exceeding this time results in failure. During the test, perform the right-side reverse first, followed by the left-side reverse. Not following this order will result in failure. Pay attention to maintaining a 30cm margin when parking. 2. Parallel Parking: The main deductions for parallel parking involve turn signals, maintaining a 30cm margin, and hitting the line. When entering the test area, steer right early and align the highest point of the wiper with the roadside line to adjust the 30cm margin. Remember the steps: first turn the wheel fully to the right, then straighten, then turn fully to the left, park, and turn on the left turn signal. When exiting, check the rearview mirror to avoid hitting the lines with the wheels. 3. 90-Degree Turn: The main deductions for the 90-degree turn involve turn signals and hitting the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect use of the turn signal deducts 10 points. After entering the turn, adjust the car to maintain a 30cm margin from the line, similar to parallel parking. When turning the wheel fully, slightly release the clutch to prevent stalling or stopping midway. Straighten the car only after the rear wheels exit to avoid hitting the line.
6
3
Share

What Causes Throttle Shaking?

Throttle shaking can be caused by the following reasons: 1. Damaged spark plugs, where the wear of the spark plug electrode gap leads to insufficient spark ignition, causing incomplete combustion of the air-fuel mixture and resulting in acceleration shaking. 2. Cracks in the ceramic part of the spark plug, leading to no ignition in one cylinder, which causes acceleration shaking. 3. Poor quality gasoline, resulting in poor atomization by the fuel injector and incomplete combustion of the air-fuel mixture in the cylinder, leading to idle shaking. 4. Uneven tread on the four wheel tires, such as bulges or foreign objects. 5. Loose wheel bearings causing vehicle shaking during driving.
3
3
Share

What Causes the Tire Pressure Monitoring System Not to Display Tire Pressure?

If there is a response when stationary but not while driving, the reasons could be low transmission strength, insufficient receiver sensitivity, or interference. If there is no response when stationary and pairing fails, it indicates a transmitter failure or low signal transmission strength, which can usually be resolved by changing the placement position. Below are some additional details about tire pressure monitoring: 1. The module battery is depleted; replace the entire tire pressure monitoring module. 2. The module inspection port is blocked by something, preventing detection. 3. Pairing failure; re-pairing is required. Some models can do this independently, but most require professional pairing at a 4S shop. 4. The module is damaged; replace it with a new one.
3
3
Share

How to turn off the rear wiper on the Q3?

For the Q3 wiper controls, pulling the switch inward activates the front wipers, while pushing it outward activates the rear wiper. When the rear wiper is engaged, simply push the switch upward to turn it off. Relevant details are as follows: 1. In terms of exterior design, the domestic Q3 shares nearly identical styling with the imported version. 2. The interior features standard black leather seats and a black leather-wrapped steering wheel accented with silver chrome trim. 3. Powertrain options mirror the imported model - the 35TFSI comes with a 170hp 2.0T engine, while the 40TFSI gets a higher-output 211hp 2.0T unit.
13
0
Share

What does fault code P17C500 mean?

When the fault code P17C500 appears in a car, it indicates an issue with the vehicle's engine. According to diagnostics at a 4S dealership, this is caused by the car's computer system being overly sensitive and does not constitute a major fault. The problem can be resolved by clearing the fault code. Below is additional information about automotive fault codes: 1. Fault codes are detected using the diagnostic computer at 4S dealerships. Based on the specific fault code, technicians can identify which part of the engine is malfunctioning and perform targeted repairs, thereby improving maintenance efficiency. 2. Engine faults should be taken seriously as the engine is the most critical component of a vehicle. Any malfunction may render the car undrivable or cause other operational issues.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.