Will Reversing at an Intersection Be Captured by Traffic Cameras?

1 Answers
Josephine
07/29/25 6:43pm
Reversing at an intersection will be captured by traffic cameras. When a motor vehicle passes through an intersection without traffic signal control or traffic police command, the following regulations must be observed: 1. Follow traffic signs: If there are traffic signs or markings, yield to the party with the right of way; 2. Yield to vehicles from the right: If there are no traffic signs or markings, stop and observe before entering the intersection, yielding to vehicles coming from the right; 3. Turning vehicles yield to straight-moving vehicles: Turning motor vehicles must yield to vehicles going straight; 4. Opposite direction yields to left-turning vehicles: Right-turning motor vehicles from the opposite direction must yield to left-turning vehicles.
Was this review help?
4
0
Share
More Forum Discussions

What is the actual fuel consumption of the Beidou x5?

The actual fuel consumption of the Beidou x5 is approximately 5.5-6.5L/100km. The following are the factors affecting fuel consumption: Vehicle factors: Fuel consumption is related to displacement. Generally, the larger the displacement, the higher the fuel consumption. At the same time, the thermal efficiency of the engine and the vehicle's exterior design will also affect fuel consumption. External environmental factors: Road conditions and the external environment also have a significant impact on fuel consumption. Generally, flat roads are more fuel-efficient than rough roads, straight roads are more fuel-efficient than winding roads, and smooth traffic is more fuel-efficient than traffic jams. In winter, the low temperature prevents gasoline from reaching the optimal combustion temperature, leading to incomplete combustion and resulting in some fuel consumption loss.
9
5
Share

Where are Dongfeng Nissan's production bases located?

Dongfeng Nissan's production bases are located in Guangzhou, Xiangyang, Dalian, Zhengzhou, and Changzhou. Below is a detailed introduction to Dongfeng Nissan vehicles: Development of Dongfeng Nissan vehicles: Dongfeng Nissan Passenger Vehicle Company was established on June 16, 2003, and is an important passenger vehicle division under Dongfeng Motor Co., Ltd. The vehicle models include: compact (March, Livina), family economy (Tiida, Sylphy), business (Teana, Cedric), MPV (7-seater Lannia), and SUV (X-Trail, Qashqai, Murano). Characteristics of Dongfeng Nissan vehicles: The quality is relatively stable and reliable, fuel-efficient and worry-free, mostly equipped with naturally aspirated engines, with good durability and relatively low maintenance costs in the long run.
11
3
Share

What is the difference between Jaguar XE and XEL?

Jaguar XE and XEL differ in their production origin, dimensions, and matched transmissions. Below are the detailed differences: Production Origin: Jaguar XEL is domestically produced, while Jaguar XE is imported. Dimensions: The Jaguar XE measures 4672mm in length, 1835mm in width, and 1416mm in height, with a wheelbase of 2915mm. The Jaguar XEL measures 4788mm in length, 1850mm in width, and 1429mm in height, with a wheelbase of 2935mm. Matched Transmissions: The Jaguar XE is equipped with a 6-speed automatic transmission. The Jaguar XEL is equipped with an 8-speed automatic transmission.
6
4
Share

How Often Should the Brake Pads of Nissan Qashqai Be Replaced?

Under normal circumstances, the front brake pads of the Nissan Qashqai should be replaced every 30,000 to 50,000 kilometers, while the rear brake pads should be replaced every 60,000 to 100,000 kilometers. It is recommended to inspect the brake pads every 30,000 kilometers. Below are the detailed explanations: The replacement cycle of brake pads is not fixed: The replacement cycle of brake pads is not entirely fixed and depends on factors such as the vehicle's driving conditions, frequency of braking, and braking force. Additionally, the material of the brake pads and their front or rear position can also lead to varying degrees of wear. Precautions for replacing brake pads: After installation, it is necessary to press the brake pedal several times. This action is to eliminate the gap between the brake shoes and the brake disc, allowing the wheel cylinder piston to reset. Check whether the brake fluid pump is functioning properly. Once confirmed, the brake pad replacement is complete. Generally, new brake pads require a break-in period. Only after this period can they perform their braking function more effectively.
16
2
Share

What is the source of the built-in 4G network in cars?

The built-in 4G network in cars comes from a SIM card bound to the vehicle. Here is a detailed introduction about the built-in data: Classification and top-up of built-in 4G data: Generally, the connected car data is divided into two parts: basic functions and entertainment functions. The basic functions come with lifetime free data, while the entertainment functions require users to top up through the car's exclusive APP after the data is used up. Cannot be replaced with a mobile phone SIM card: Although both car data and mobile phone data are used through bound SIM cards, the car's SIM card is specially made and built into the multifunctional car system, making it usually impossible to replace. Even if forcibly inserted into the car system, it cannot be recognized and used.
10
3
Share

Why Does a Car's Chassis Drip Water in Summer?

The reasons for water dripping from a car's chassis in summer are the drainage from the air conditioning system and water dripping from the muffler and exhaust pipe at the rear of the car. Here are the detailed explanations: Air Conditioning System Drainage: Due to the high outdoor temperature in summer and the low temperature inside a car with the air conditioning on, a temperature difference is created, leading to water dripping from the chassis. The low-pressure pipes of the car's air conditioning system are not wrapped with thermal insulation foam, making the pipe surfaces prone to condensing moisture from the air. Water droplets also condense and gather at the lowest point of the pipes, dripping down. Water Dripping from the Muffler and Exhaust Pipe at the Rear of the Car: When gasoline is injected into the cylinders and mixed with air, it undergoes complete combustion in the combustion chamber, primarily producing carbon dioxide and water. At high temperatures, the water is discharged into the atmosphere in the form of water vapor.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.