Will reversing at a highway entrance definitely be captured by cameras?

1 Answers
StLincoln
07/30/25 10:39am
Reversing at a highway entrance will be captured by cameras. Below is relevant information about reversing at highway entrances: Penalty Standards: According to Article 123 of the Ministry of Public Security's "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Motor vehicle drivers who commit violations such as reversing, driving in the opposite direction, or making U-turns across the central divider on highways will be penalized with 12 demerit points and a fine. Handling Methods: If you fail to see the signs clearly and take the wrong route, miss an entrance or exit, or enter the wrong entrance, do not reverse on the spot to correct your route. After entering the highway entrance, continue driving forward for a few kilometers and exit at the next available exit. If you lose your way, you can ask at the toll booth or call 12122 for assistance.
Was this review help?
1
4
Share
More Forum Discussions

What to Do When the Interior Light of a Volkswagen Car Stays On?

Solutions for the interior light of a Volkswagen car staying on are as follows: 1. First, understand the three modes of the Volkswagen interior light, which are on, off, and door. The interior light staying on belongs to the on mode. 2. Switch the mode to off to turn off the car's interior light. Types of car lights include trunk lights, fog lights, high beams, low beams, etc. Car lights are usually installed on the front bumper of the car and are distinguished by being installed on different parts of the car. Below is some related technology about Volkswagen: 1. Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, with brands such as Audi and Volkswagen under its umbrella. Taking one of its models, the Jetta, as an example, its body dimensions are 4501mm in length, 1704mm in width, and 1469mm in height, with a wheelbase of 2604mm. 2. In terms of appearance, the Jetta adheres to the pure Volkswagen design style, with a cool and handsome yet elegant exterior styling, making it a fashion pioneer; the simple and dynamic body lines exude infinite vitality.
12
1
Share

How to Use the Cruise Control in the Honda Avancier?

Here are the steps to use the cruise control in the Honda Avancier: 1. Activate Cruise Control: Press the CRUISE button on the steering wheel, and the CRUISEMAIN indicator on the instrument panel will illuminate, indicating that the cruise control is ready for use. 2. Set the Speed: Accelerate the vehicle to the desired speed, then remove your foot from the pedal and press the RES/+/SET/- switch. The set speed is confirmed the moment you release the switch, and the CRUISE-CONTROL indicator will light up. The multimedia information screen will display the set speed. 3. Adjust the Speed: Toggle the RES/+/SET/- switch up or down to increase or decrease the cruising speed. Each toggle changes the speed by 1.6 km/h; holding the switch continuously increases or decreases the speed until you release it. 4. Cancel Cruise Control: Press the CANCEL button, press the CRUISE button, or step on the brake pedal to cancel the cruise control. After the cruise system is turned off, the cruise control indicator and related speed display will turn off.
11
5
Share

What does a defective car mean?

A defective car refers to a vehicle with minor issues in its appearance or non-essential parts, which do not affect its normal performance. Below is an introduction to precautions when picking up a car: 1. Inspect the body: Check for scratches and wear on the paint. It's best to examine the paint under ample sunlight to detect any color differences. You can also open the car doors and view from multiple angles to ensure the sheet metal is even. 2. Check the vehicle's nameplate: The nameplate is located on the side of the driver's door or in the engine compartment. Pay attention to the manufacturing date. 3. Inspect the windshield: If the window glass is a year or more older than the car's production date, it may have been replaced. 4. Check the cleanliness of the engine compartment: If the car has been stored for a long time or used, there may be noticeable dust or stains in certain areas. 5. Check the doors: Ensure they open and close smoothly, and that the gaps between the doors and the front/rear bumpers are consistent. 6. Check the tire production date: This is also a way to determine if the car has been in stock for a long time.
4
1
Share

What is the fuel tank capacity of the Fabia?

The fuel tank capacity of the Fabia is 45 liters, which is the officially announced data. Owners who have purchased the Fabia can also check this information on the vehicle's configuration sheet. The Fabia uses 92-octane gasoline, with a fuel consumption of 5.8-6L per 100 kilometers. A full tank can cover a distance of 750-775km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe fill level, and there is still some space from the safe fill level to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the marked tank capacity.
18
2
Share

What are the functions of each button on the 2020 Mazda 3 Axela?

On the driver's side door, the buttons include the central locking adjustment function button, one-touch window up/down function button, and rearview mirror adjustment button. On the left side of the steering wheel are the audio system control buttons, while the right side features the adaptive cruise system function buttons. In front of the steering wheel on the left is the headlight adjustment function button, and on the right is the automatic wiper adjustment function button, with the steering wheel paddle shifters located nearby. Below is more related information: 1. Internal/External Air Circulation: Internal circulation refers to the self-contained air system inside the vehicle, while external circulation allows air exchange between the inside and outside of the vehicle. Internal circulation is typically used in congested traffic or when the external air quality is poor. On highways, it's advisable to periodically switch from internal to external circulation, with internal circulation preferably not exceeding one hour. 2. Temperature Zone Synchronization: The temperature zone synchronization function adjusts the temperature in the driver's seat, and the other temperature zones will change accordingly. Of course, when synchronization is turned off, each zone can be set individually to meet the needs of passengers in different positions. 3. Parking Radar/Image: The central display screen shows images, and if equipped with radar, there will be an audible warning signal.
10
3
Share

Why does the engine still make noise after the car is turned off?

The reason the engine still makes noise after the car is turned off is that the engine cooling system is still working. To prevent the engine or turbocharger from overheating, vehicles are equipped with a delayed cooling function. This function operates based on the water temperature measured by sensors and will continue working until the water temperature drops within the set range. Reasons for abnormal noises from the engine when turning off the car include: 1. Cooling noise from the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is 400-800°C. After turning off the engine, its operation gradually stops, and the temperature decreases, causing the internal metal components to expand and contract, resulting in abnormal noises. 2. Cooling noise from the exhaust pipe: Typically, the exhaust pipe can reach a temperature of over 200°C during cold idle. If the vehicle is under high load or if there is combustion of the air-fuel mixture in the exhaust pipe, the temperature can be even higher, leading to thermal expansion and contraction of the exhaust pipe and causing abnormal noises. 3. Water pump noise: Water pump noise is mainly caused by the pump wheel bearing of the water pump. Due to prolonged operation, erosion by coolant, and scale buildup, the water pump blade bearing can become severely worn. If the issue is not addressed for a long time, it can lead to complete failure of the water pump, where the pump operates but fails to circulate coolant, thereby affecting engine cooling.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.