Will reversing 2 meters at the ramp entrance be captured by cameras?

2 Answers
OMarley
07/29/25 6:42am
Reversing 2 meters at the ramp entrance will be captured by cameras. Reversing is not allowed on highways as it is extremely dangerous. Below are precautions for driving on highways: Stay informed about road conditions: Before driving, it is crucial to obtain road condition information in advance. If TV and radio updates are not timely enough, you can call the highway hotline for inquiries. Especially during foggy seasons, it is even more important to check road conditions beforehand to avoid unnecessary detours or exits after getting on the road. Avoid fatigue driving: The enclosed environment of highways tends to increase speed, requiring prolonged high concentration, fixed driving posture, and monotonous operations, which can easily lead to both psychological and physical fatigue. Coupled with bad weather, the risk of traffic accidents increases. Therefore, when driving on highways, it is recommended to take a break every 2 hours to relieve fatigue and maintain a good mental state.
Was this review help?
6
0
Share
Mark
08/12/25 10:06am
I've been driving on highway ramps for many years and know that reversing, even just 2 meters, is a violation. The cameras have wide coverage and can easily capture such actions. Highway exits and ramps are densely monitored areas, equipped with electronic eyes specifically designed to catch reversing and wrong-way driving. If caught, you'll typically face a 6-point deduction and a 200-yuan fine—no small matter. Legally, any reversing can be considered dangerous driving, as it can easily lead to rear-end collisions or side-swipe accidents. I always remind myself that safety comes first—it's better to drive to the next exit and circle back than to reverse on the spot. In reality, many people take chances by reversing short distances, only to face harsh penalties. It's best to plan your route with navigation in advance to avoid mistakes. If you accidentally miss a ramp exit, slow down and drive to a safe area before stopping to adjust your direction.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to Replace the Battery When the Remote Key Fob Dies?

Method to replace the battery when the remote key fob dies: 1. Prepare a screwdriver and locate the opening notch on the side of the key fob; 2. Use the screwdriver to pry open the side seam from the notch to reveal the inner core of the key fob; 3. Locate the battery, use the screwdriver to remove the old battery, and replace it with a new one; 4. Reassemble the key fob in the reverse order. Precautions for using the remote key fob: 1. Do not place the key fob near electronic devices like mobile phones or computers; 2. Avoid throwing the key fob around, as the internal circuit board is fragile and can be easily damaged if mishandled for a long time; 3. If the key fob gets wet, do not shake it or press any buttons. Open the casing and use a hairdryer to dry it, otherwise, water may spread across the entire circuit board.
11
3
Share

What are the disadvantages of not driving a car for a long time?

The disadvantages of not driving a car for a long time are as follows: 1. Oil seals in various parts may deform, age, and become prone to damage and oil leakage; 2. The service life of friction parts is shortened; 3. Battery capacity decreases and its lifespan is reduced; 4. Tires may deform; 5. Electronic components are more likely to malfunction; 6. A stationary vehicle can adversely affect the braking system, steering system, and fuel supply system. When a car is not driven for a long time, it should be started regularly to keep the engine in normal working condition. In addition, the vehicle should be cleaned regularly to prevent damage to the paint or interior over time. Precautions: 1. Start the vehicle regularly; 2. Take protective measures, such as covering the car with a car cover or parking it in a garage; 3. Clean the vehicle in advance; 4. Keep the battery fully charged.
3
5
Share

What Causes a Car to Stall While Driving?

There are three main reasons why a car may stall while driving: 1. Sudden stalling during operation is typically an electrical circuit failure, possibly caused by low-voltage power interruption; 2. Faulty ignition components, usually involving the ignition coil, capacitor, or electronic ignition module; 3. Fuel system issues such as a damaged fuel pump, ruptured fuel line, clogged carburetor fuel inlet, or empty fuel tank. Solutions after stalling: For manual transmission vehicles, you can directly restart the engine; For automatic transmission vehicles, first carefully shift the gear into neutral (be cautious not to mistakenly engage reverse gear (R), as this could damage the transmission), then restart the engine.
13
0
Share

Which One is the Heater Switch in a Car?

The heater switch in a car is typically a rotary knob marked with red and blue colors on both sides, usually located in the center of the dashboard. Turning the knob toward the red zone gradually increases the temperature, and pointing the knob to the red zone activates the heater. For cars equipped with automatic air conditioning, the heater switch is the "AUTO" button. Pressing the "AUTO" button allows the automatic air conditioning to adjust the temperature inside the car automatically. Precautions for using the heater: 1. Avoid directing the warm air straight at the head, as prolonged exposure can cause driver fatigue and affect driving safety; 2. Never leave the heater on while sleeping in the car, as this can easily lead to carbon monoxide poisoning; 3. After turning on the heater, the car becomes a confined space, creating an ideal environment for bacteria to grow and spread.
3
4
Share

Can You Still Drive When the ABS Yellow Light is On?

When the ABS warning light is on, it is recommended not to continue driving because the illuminated ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. There are various states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light stays on (most common). Cause 1: The ABS speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed or the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay can lead to signal issues and system failure. Solution: Inspect wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical components are in use, the battery voltage may drop below 10.5V. As the engine speed increases, the voltage rises, causing the ABS light to turn off. This can also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; loose wiring connections in the ABS hydraulic valve body; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary. Check for enlarged gaps in the connectors. Replace the ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: At high speeds, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals. This may also occur due to incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, typically found on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, and use a finger to push the brake switch linkage all the way down. Release the brake pedal to complete the self-setting position. Replace the brake light switch if necessary.
14
0
Share

What is the symbol for China VI vehicles?

The symbol for China VI vehicles is Ⅵ, which can generally be found on the vehicle inspection sheet. The inspection sheet includes details such as the model, color, emission standard, engine number, and chassis number. The Chinese government introduced the China I emission standard, which is based on European emission standards to align with international norms. From China I to China VI, Roman numerals have been used to denote the standards, with new emission standards being introduced every few years. Methods to check a vehicle's emission standard: 1. Vehicle Conformity Certificate; 2. Environmental Information List accompanying the vehicle; 3. Vehicle Qualification Certificate, where the vehicle's emission standard is clearly stated on the relevant certificates.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.