Will points be deducted if the rearview mirror crosses the line in Subject 2?

1 Answers
ZoeFitz
07/28/25 9:20pm
In principle, points will be deducted if the rearview mirror crosses the line in Subject 2. The standard for parking the car is that the entire body of the car, including the rearview mirrors, must be within the parking space. During the actual test, it also depends on the infrared sensors of the test vehicle. Some test vehicles can detect if the rearview mirror crosses the line, while others cannot. Here is additional information: 1. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. 2. The test items for small vehicles C1 and C2 include five mandatory tests: reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-turns). Some regions also include a sixth item: high-speed toll collection.
Was this review help?
8
4
Share
More Forum Discussions

Can a New Car Go Directly on the Highway?

A new car can go directly on the highway. Here are the specific details: 1. Try to avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: If a new car is fully loaded during the break-in period, it can cause damage to the components. Therefore, within the first 1,000 kilometers, the load should generally not exceed 75%-80% of the rated capacity. 3. Driving on the highway: During the break-in period, driving long distances on the highway increases the continuous working time of the engine, which can lead to component wear. It is recommended to maintain a speed of 120 km/h with the engine speed not exceeding 3,000 RPM. If the speed exceeds 3,000 RPM, consider reducing the speed to keep it at 3,000 RPM. During long-distance driving, take a break of about ten minutes at service areas.
9
5
Share

How to enable the sound when locking the 2021 Classic Sylphy?

To enable the horn sound when locking the 2021 Classic Sylphy, simultaneously press the unlock and lock buttons on the remote key for 3 seconds. The horn sound will be successfully set once the lights flash. Below are the specific details about the Sylphy: 1. The Sylphy is a compact car under Nissan, with body dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. 2. The Sylphy is equipped with a 1.6L naturally aspirated engine across all models. The 2019 Sylphy offers 4 variants, featuring 1.6L displacement, with options for manual or continuously variable transmission (CVT). The engine delivers a maximum power of 93.0kW, maximum horsepower of 126PS, and maximum torque of 168.0N·m. 3. In terms of suspension, the Sylphy features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
11
0
Share

How to Solve the Problem of Skoda Octavia Brake Light Staying On?

Skoda Octavia brake light staying on solutions: 1. If the brake light stays on, brake fluid should be added. 2. It could be that the tail light bulb is damaged, and replacing the bulb will solve the problem. 3. If the brake pads are severely worn, the light may also stay on, and the brake pads need to be replaced. Below is relevant information about the brake light: 1. Lack of brake fluid, which is an essential part of the car's braking system. When the driver steps on the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders at each wheel, causing the brake pads to contact the wheels and stop the vehicle. 2. Tail light bulb damage. The brake fluid reservoir has upper and lower lines. When the brake fluid level falls below the lower line, the sensor next to the reservoir detects this and reflects it on the dashboard. If the brake fluid decreases rapidly, it indicates a leak in the braking system.
20
0
Share

What Causes the Oil Pump to Fail?

The following are the reasons for oil pump damage: 1. Wear between the plunger and plunger sleeve: During operation, mechanical impurities in the fuel enter the injection pump chamber, causing abrasive wear. Combined with the corrosive effect of the fuel, this increases the gap between the plunger and sleeve. 2. Wear of the delivery valve: High-speed flow scouring by mechanical impurities in the fuel causes wear on the delivery valve, pressure relief band, or valve seat, leading to poor sealing and insufficient residual pressure in the high-pressure fuel line. Additional information on the causes of damage: 1. Failure of the delivery valve spring: Fatigue reduces the spring force of the delivery valve, impairing its one-way shut-off function and causing backflow. 2. Insufficient pressure in the low-pressure fuel line: Reduced or no pumping capability of the fuel supply pump, clogged diesel filters or fuel lines, or air entering the fuel system can decrease the fuel pressure in the low-pressure line of the injection pump, preventing pressure generation. When the injection pump operates, fuel cannot quickly enter the pump chamber, resulting in no or insufficient fuel injection.
17
4
Share

Should You Call 122 or 110 for a Traffic Accident?

In the event of a traffic accident, you should call 122. Below is relevant information regarding traffic accident hotlines: 1. Introduction to 122: The 122 emergency service platform is a department established by national public security traffic management authorities to handle public reports of traffic accidents. It dispatches and coordinates police officers to address various emergencies and requests for assistance, while also accepting public reports, complaints, and inquiries regarding traffic management and law enforcement by traffic police. 2. Important Notes: To help public security authorities respond quickly to emergencies, citizens calling 122 should pay attention to the following: First, briefly explain what happened; second, provide a detailed address; third, state the caller's name and contact number. Only by clearly explaining the situation can the police prioritize and take appropriate measures; only by providing a clear address can nearby police forces be dispatched promptly to the scene; and only by leaving a name and contact number can follow-up and status inquiries be facilitated. In special circumstances, callers who prefer not to leave their name and contact number may choose not to do so.
9
4
Share

What Problems Can Occur If Car Battery Terminals Are Connected in Reverse?

Reversing the positive and negative terminals of a car battery can lead to the following four consequences: 1. Alarm system damage: If the ignition is off and the circuit is not powered, the alarm system may burn out. 2. Fuse blowout: If the ignition is on, only the fuse may be blown. 3. Fuse, controller, and related circuit damage: If the ignition is on, the fuse, controller, and related circuits may be damaged (the damage is random). 4. Starter motor damage: If the ignition is on and the engine is started, the starter motor may be damaged. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Car batteries are categorized into conventional lead-acid batteries, dry-charged batteries, and maintenance-free batteries. Typically, when people refer to a car battery, they mean a lead-acid battery. The normal service life of a car battery ranges from 1 to 8 years.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.