Will points be deducted if the rearview mirror crosses the line during the roadside parking in Subject Three?

1 Answers
StJudah
07/29/25 7:54pm
Points will be deducted if the rearview mirror crosses the line during the roadside parking in Subject Three. Relevant information about Subject Three is as follows: 1. Subject Three: It is part of the motor vehicle driver's license assessment, referred to as the road driving skills and safe civilized driving knowledge test. 2. Test content: includes vehicle preparation, light simulation test, starting, straight-line driving, gear shifting operation, lane changing, roadside parking, going straight through intersections, turning at intersections, meeting vehicles, overtaking, U-turns, and night driving. The detailed points deduction rules for roadside parking in Subject Three are as follows: 1. Before parking: Failing to observe the rear and right traffic conditions through the interior and exterior rearview mirrors and turning the head to confirm safety will result in a 100-point deduction; Failing to park within the specified distance after the examiner issues the roadside parking command will result in a 100-point deduction. 2. After parking: If the vehicle body exceeds the right edge line of the road or the sidewalk edge, a 100-point deduction will be applied; Failing to close the door after getting out of the vehicle will result in a 100-point deduction; If the distance between the vehicle body and the right edge line of the road or the sidewalk edge exceeds 50cm, a 100-point deduction will be applied; If the distance between the vehicle body and the right edge line of the road or the sidewalk edge exceeds 30cm but does not exceed 50cm, a 10-point deduction will be applied; Failing to tighten the parking brake will result in a 10-point deduction. 3. Before tightening the parking brake: Releasing the foot brake pedal will result in a 10-point deduction. 4. Before getting out of the vehicle: Failing to turn off the engine will result in a 5-point deduction.
Was this review help?
2
5
Share
More Forum Discussions

How Often Should the Engine Belt Be Replaced?

Car belts are consumable items and require regular replacement. Generally, it is recommended to replace them every 3-5 years or after driving approximately 80,000-100,000 kilometers. The replacement interval for new car belts can be appropriately extended, but they should still be replaced after driving 100,000-130,000 kilometers. The specific replacement time should be referred to in the vehicle maintenance manual. Below are some related details: 1. Other situations requiring replacement: Additionally, the actual usage of the car should be considered. If the car is often driven without heavy loads, the belt can be inspected at 80,000 kilometers and continued to be used if no issues are found, with replacement scheduled at 100,000-130,000 kilometers. If the car is frequently driven under heavy loads, causing greater belt wear, it should be inspected every 60,000-80,000 kilometers and replaced around 100,000 kilometers. 2. Replacement precautions: When replacing the timing belt, it is common to replace the alternator belt and tensioner pulley together. The specific cost depends on the product brand and vehicle model. If the water pump has issues, it should also be replaced simultaneously.
12
1
Share

Is China VI gasoline ethanol fuel?

Ethanol gasoline can meet the emission standards of China VI vehicles, but China VI gasoline is not ethanol gasoline. China VI refers to the emission standard, not a type of gasoline. It comprehensively considers the technical conditions of the vehicle and imposes restrictions on tailpipe emission indicators. Advantages of ethanol gasoline: 1. High octane number and good anti-knock performance: It ensures better combustion during driving, providing the engine with sufficient power output. This is also one of the important reasons why many consumers choose ethanol-fueled vehicles. Consumers can select the fuel type based on their vehicle model. 2. Higher oxygen content in ethanol gasoline: The engine can burn more completely. The oxygen content in ethanol is as high as 34.7%. When gasoline contains 10% ethanol, the oxygen content can reach 3.5%. 3. Effectively reduces vehicle emissions: Especially for vehicles that have been in use for a long time, using ethanol gasoline can result in better emissions. E15 ethanol gasoline (with 15% ethanol content in gasoline) reduces hydrocarbon emissions by 16.2% and carbon monoxide emissions by 30% compared to pure unleaded gasoline. 4. Abundant production resources for fuel ethanol: When blending less than 10% ethanol into gasoline, existing vehicle engines do not require major modifications and can directly use ethanol gasoline.
4
5
Share

What does the CLR button mean?

In a car, the CLR button is a function key used to select features or confirm certain information. Below are the relevant details about CLR: 1. Function: When the trip computer displays items like the trip mileage, average speed, or average fuel consumption, pressing and holding the SET/CLR button at the top of the control lever will emit a beep, after which the trip mileage and average speed will reset, and the average fuel consumption will revert to the initial value. 2. Usage: Press the MENU button to enter the trip computer display settings, where three lines of code will appear. The top line will show one of the numbers 1, 2, or 3. Press the CLR button to enter the format selection interface, where two lines of code will appear. The bottom line corresponds to the number from the first line of the previous interface. Rotate the knob to select one of the numbers 1, 2, or 3, then press CLR again to save. Exit back to the three-line code interface and press MENU to return to the trip computer display interface.
9
2
Share

Why Do License Plates Fall Off in the Rain?

Because when a vehicle is driving through water, the resistance from the water is hundreds of times greater than the usual air resistance. Many license plates that are washed away are secured with only two screws, making them easily lifted by the water flow. Here is some relevant information: License Plate: A license plate, commonly known as a vehicle plate, refers to the number plate affixed to the front and rear of a vehicle. They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, region, and other relevant information. Function: License plates serve as a unique identifier for each vehicle, allowing authorities to determine the vehicle's registered region and access details such as the owner and registration information.
5
0
Share

What does installing ETC in a car mean?

The device installed in a car for ETC is called an OBU device. Once the device is installed, activated, and a card is inserted, it can be used normally. ETC is an electronic toll collection system, also known as an automatic road toll system. It is a specialized method for collecting tolls on roads, commonly seen on highways, toll bridges or tunnels, and certain sections of city centers to alleviate urban traffic congestion. According to regulations by the State Council, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they must be activated first. During holiday free periods, vehicles with ETC can still use highways, and no tolls will be deducted when passing through ETC lanes. ETC Deduction Principles: Highways have one or more ETC lanes. Using dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane, along with computer networking technology for backend bank settlements, the system allows vehicles to pay tolls without stopping at toll stations. This operates on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass toll stations without stopping. Reduces wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption. Users also enjoy a 5% discount on tolls. Improves efficiency: ETC lanes can theoretically increase traffic flow by 2-3 times, making traditional ETC faster, more advanced, and more efficient. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Integrated Transportation System" that "by 2020, key city clusters should achieve interoperability of transportation cards, and the proportion of vehicles equipped with ETC should significantly increase." The plan also set a target of "50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to improving the convenience of ETC installation and usage rates for passenger vehicles, the future will also promote ETC usage for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC. ETC Usage Notes: The ETC transaction sensing range is 8 meters. If the vehicle in front is stationary, maintain a distance of at least 10 meters to avoid mistakenly paying for the vehicle ahead due to faulty or missing ETC devices. The recognition speed for ETC lanes is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to failed toll deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may render the tag invalid. In such cases, the device can be taken to the bank where the ETC card was issued or to a highway service office for inspection. If the issue is not due to human interference, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause toll deduction failures. Follow the guidance of on-site staff and use manual MTC lanes to pay with cash or cards. Thick car windshields may cause poor signal reception. This is especially important for vehicles that have had their windshields replaced after accidents or for those with modified front windshields.
13
0
Share

What is the reason for the flashing electronic handbrake warning light in the Haima F7?

The reasons for the handbrake light and brake system light being on include the handbrake not being fully released, brake fluid leakage, or worn brake pads. Handbrake not fully released: You can pull the handbrake and release it again to ensure it is properly engaged. Brake fluid leakage: You can visit a repair shop or 4S store to inspect and fix the leakage point, then refill the brake fluid. These two lights will then turn off, and the system will return to normal. Worn brake pads: This causes the brake fluid level in the reservoir to drop. When the level drops to the point where the sensor is activated, the handbrake light will illuminate. However, if the fluid level is just at the threshold of activation, the handbrake light may flicker on and off as the vehicle moves. Solution: Under the premise of ensuring normal vehicle braking, you should drive to a repair facility as soon as possible for maintenance. If the vehicle's braking is abnormal, park in a safe location and wait for assistance. In cases of brake pedal failure or other special circumstances, pull the control handle to engage the brakes. Pulling the control handle provides braking, while releasing it does not.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.