Will points be deducted if the license plate is dented in a collision?

2 Answers
BriannaMarie
07/24/25 12:01am
Points will not be deducted if the use is not affected, and there is no problem as long as the information on the vehicle's license plate can be clearly seen. Below is a detailed introduction regarding the situation of a dented car license plate: 1. Overview: If the license plate is bent at too large an angle, making the numbers inside invisible, it may be considered as intentionally obscuring the license plate number and subject to penalties. If traffic police find that the vehicle's license plate is slightly deformed but does not affect the identification of the license plate number, no penalty will be imposed on the owner. However, you may be stopped and informed that there are signs of bending or deformation on the license plate. 2. Others: Motor vehicle license plates should be installed and hung in accordance with the installation standards set by the Ministry of Public Security in the "People's Republic of China Motor Vehicle License Plate." The front license plate should be installed in the middle or slightly to the right of the front section of the vehicle, and the rear license plate should be installed in the middle or slightly to the left of the rear section, without affecting the safe driving of the vehicle or the identification of the license plate.
Was this review help?
13
4
Share
McRicardo
08/10/25 7:51pm
Will a dented license plate result in demerit points? Let me explain this carefully. Having driven for many years, I once got rear-ended by a small truck in the city, and the license plate was dented. At the time, I thought it was a minor issue and didn't fix it immediately. But a few days later, during a traffic police inspection, they said my plate was illegible and fined me on the spot plus 3 demerit points! Regulations require license plates to clearly display numbers—failure to meet this standard counts as obstruction and may lead to fines and demerits. After an accident, I recommend taking photos for documentation, contacting a 4S shop or repair shop to fix it, and getting a certificate to avoid future hassles. Safety is no trivial matter—the license plate is your vehicle's ID card. Don't lose big for small gains and compromise driving safety.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What Causes the Gurgling Sound When Driving at Low Speed?

The reason for the gurgling sound when driving at low speed is an issue with the engine chassis. This sound usually indicates wear and gap in the suspension links, and it is recommended to visit a nearby repair shop for confirmation and replacement. The chassis refers to the part of the car composed of the transmission system, running system, steering system, and braking system. It supports and installs the car engine and its various components and assemblies to form the overall shape of the car, bears the engine power, and ensures normal driving. Chassis maintenance should be highly valued as it directly affects the car's safety, handling, comfort, economy, and other key performance aspects. It is recommended to regularly maintain the chassis at a professional repair shop.
1
5
Share

What does a yellow bulb with an exclamation mark in the car mean?

A yellow bulb with an exclamation mark in the car indicates that a bulb is not working, which is the bulb failure indicator light. A car has various lights, such as headlights, taillights, turn signals, license plate lights, fog lights, and brake lights. If any of these bulbs are not functioning, the bulb failure indicator light will illuminate. Some cars can read the fault code with a universal diagnostic scanner, while others require a professional diagnostic scanner to read the fault code. When the yellow exclamation mark light comes on, it means the car has a general fault, such as overheating of the dry dual-clutch transmission clutch, fuel cut-off system intervention or failure, parking sensor failure, external light failure, engine oil pressure sensor failure, or traction control system warning or failure.
17
2
Share

How to Remove the Negative Terminal of a Car Battery?

To remove the negative terminal of a car battery, follow these steps: 1. Pull the hood release lever located on the left side of the driver's leg area. 2. Lift the car's engine hood upwards. 3. Use the support rod to prop up the engine hood. 4. Locate the battery; the black side is the negative terminal. Simply unscrew the negative terminal's bolt to remove it. The negative terminal refers to the lower potential end of a power source. In a primary cell, it is the electrode where oxidation occurs, typically written on the left side in battery reactions. In an electrolytic cell, it is the electrode where reduction occurs, distinguishing it from a primary cell. To identify the negative terminal, note that battery terminals painted red represent the positive pole, while those painted blue indicate the negative pole. If the battery has been in use for a long time, the colors may appear faded.
14
1
Share

How to adjust Mercedes-Benz to Burmester sound?

To adjust Mercedes-Benz to Burmester sound, follow these steps: 1. You can adjust it from the car's central control screen; 2. According to the owner's preferences, you can adjust the high, mid, and low bass effects in the sound settings; 3. There are also various sound effects to choose from, such as classical, pop, punk, and folk, meeting the needs of different consumers. Burmester is a company specializing in sound system manufacturing. Mercedes-Benz is a German car brand. Taking the Mercedes-Benz S600 as an example, its body dimensions are 5230mm in length, 1871mm in width, and 1485mm in height, with a wheelbase of 3165mm. The Mercedes-Benz S600 is equipped with a 6.0-liter V12 twin-turbocharged engine, paired with a 7-speed automatic transmission, delivering a maximum power of 390KW, a maximum horsepower of 530PS, and a maximum torque of 830NM. The engine's maximum power speed is 4900rpm, and the maximum torque speed ranges from 1900 to 4000rpm, with multi-point electronic fuel injection.
4
5
Share

What Causes the Clicking Sound When Shifting Gears in an Automatic Transmission Car?

The causes of the clicking sound when shifting gears in an automatic transmission car are: 1. The release bearing lacks lubricant, causing dry friction or bearing damage; 2. There is no clearance between the release bearing and the inner end of the release lever; 3. Dirt between the release bearing sleeve and the guide tube, or the detachment of the release bearing return spring and the pedal return spring, leading to poor return of the release bearing; 4. Loose fit between the spline hole of the driven plate and its spline shaft; 5. Worn and loose fit between the drive pins of the double-disc clutch and the pin holes of the intermediate pressure plate and the pressure plate. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
20
3
Share

What is the reason why the tire pressure warning light of the Sagitar cannot be turned off?

The reason why the tire pressure warning light of the Sagitar cannot be turned off is due to abnormal tire pressure, and it is necessary to check the tires. Generally, the normal tire pressure is around 2.3 to 2.5 bar. In winter, it can be appropriately increased by about 0.2 bar. In summer, due to higher temperatures, the tire pressure can be reduced by 0.15 bar compared to the standard tire pressure to avoid high-temperature tire blowouts. The Sagitar is a compact family sedan under Volkswagen, with a body length of 4753 mm, a width of 1800 mm, a height of 1462 mm, and a wheelbase of 2731 mm. The Sagitar uses two engines, one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.