···
Log in / Register

Will points be deducted if the guide line exceeds 30cm during parallel parking?

4 Answers
LaOlive
07/29/25 4:43pm

Exceeding the 30cm guide line during parallel parking will result in a 10-point deduction. Here is an introduction to the relevant content of parallel parking: 1. Test requirements: The parallel parking test requires the driver to park the vehicle in the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Subject 2 assessment content and requirements: The five assessment items are reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Subject 2 requires 26 class hours, including 2 hours of theoretical knowledge, so there are actually 24 practical class hours.

Was this review help?
11
3
Share
McSamantha
08/14/25 6:14am

Oh, I drive a lot these days, but I still remember the details from the driving test. If the distance from the curb exceeds 30 centimeters during parallel parking, points will be deducted because it falls short of parking precision standards. During my second driving test, I lost points due to this mistake, so I recommend everyone to practice aligning with the side mirrors and road markings. After driving for real, I realized that maintaining the right distance helps prevent scraping the curb or interfering with other vehicles—it’s a fundamental skill. You can practice in an empty space using cardboard boxes as reference markers to develop a good sense of positioning, which makes things much easier. Safety always comes first. Remember not to rush—take it slow, and passing the test will be a breeze.

Was this review help?
14
2
Share
Expand All
McPatrick
10/13/25 2:41am

I just got my driver's license recently, and I have deep feelings about this. During parallel parking, if you exceed 30 cm from the curb, you will indeed lose points. I was so nervous that I almost made a mistake. The examiner pays close attention to this detail because it tests whether you can park the vehicle smoothly. During practice, I used some tricks: for example, checking the side mirror to ensure the car aligns with the curb. The test pressure is high, but you'll get used to it after practicing more. In actual driving, maintaining proper distance can also prevent scratches, which is very practical for beginners. I recommend simulating test scenarios more often to get familiar with the rhythm.

Was this review help?
2
3
Share
Expand All
DeHolden
11/26/25 3:41am

Yes, points will be deducted. According to the driving test standards, if the distance between the vehicle body and the side line exceeds 30 cm during parallel parking, it is considered an operational error. This requires candidates to precisely control the vehicle's position and develop safe parking habits. During daily driving, attention should be paid to aligning with reference points to avoid losing points in the test.

Was this review help?
6
5
Share
Expand All
More Forum Discussions

What is the function of a car differential?

We know that when a car turns, the inner wheel travels a shorter distance than the outer wheel, resulting in a speed difference. Without a differential, the wheel with poorer traction would inevitably experience slip or skid. On surfaces with good traction, to smoothly transfer the engine torque to two wheels rotating at different speeds, a differential is required between the wheels to perform its function. A standard differential consists of components such as planetary gears, a planetary carrier, and side gears. The engine's power is transmitted through the driveshaft into the differential, directly driving the planetary carrier, which then transfers power to the left and right axle shafts via the planetary gears, thereby driving the left and right wheels. Thus, the differential has two main functions: 1. Continuously transmitting the engine torque to the wheels, which may have varying speed differences at any moment. 2. Serving as the main reduction gear, using a large gear ratio to reduce the rotational speed of the power output shaft, thereby amplifying the torque at the wheels. In addition to the most common wheel differential, full-time four-wheel-drive vehicles also feature a center differential, which operates on the same principle as the wheel differential. In this case, the differential deals not with the left and right wheels but with the front and rear axles. Now, do you understand the function of a differential?
16
5
Share

What does the snowflake symbol on a car indicate?

The snowflake symbol appearing on a car: 1. The outdoor temperature is too low. The snowflake light on the dashboard will be yellow when the temperature is between 0 to 4 degrees Celsius, and red when below 0 degrees. This is an indicator light and does not affect the normal use of the vehicle; 2. The car's outdoor temperature sensor is damaged. The sensor collects incorrect outdoor temperature information, which is transmitted to the dashboard and displayed. Whether the collected temperature is lower or higher than the actual temperature, the snowflake light at this time is a fault light; 3. There is an issue with the car's wiring or control system. Although the outdoor temperature sensor collects the correct outdoor temperature information, problems during transmission and feedback cause the temperature displayed on the dashboard to not match the actual temperature. At this time, the dashboard will also light up the snowflake symbol, which is a fault light.
3
3
Share

How Long is the Warranty for Volkswagen Transmissions?

Volkswagen's 09G transmission comes with a 3-year warranty, while the DSG transmissions installed in older models of the Magotan and some newer Magotan models have an extended warranty of up to 10 years. The exact warranty period should be based on official data. A transmission is a mechanism used to alter the speed and torque from the engine, capable of fixing or changing the gear ratio between the output and input shafts. The transmission consists of a gear transmission mechanism and a control mechanism, with some vehicles also featuring a power output mechanism. Taking the Volkswagen Tayron as an example: it is a model under the Volkswagen brand, featuring a horizontal bar-style front grille and LED headlight assemblies on both sides. In terms of configuration, this vehicle is equipped with a 4-cylinder turbocharged engine, paired with a 7-speed dual-clutch transmission.
7
2
Share

What is the normal position of the Ford Focus temperature gauge?

Ford Focus temperature gauge is normal in the middle position. The lowest temperature of the Focus temperature gauge is 60 degrees, and the highest temperature is 120 degrees, with each grid representing 15 degrees. When the engine starts, the temperature gauge should indicate no less than 50 degrees; during normal driving, the normal range of the temperature gauge should be between 70 and 90 degrees. Taking the 2021 Ford Focus as an example, its body dimensions are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. The maximum power of the engine equipped in this car is 90kw, and the maximum torque is 153nm.
7
5
Share

What does Honda exi mean?

Honda exi is the standard configuration. Honda vehicles generally come in three grades: lxi, exi, and vti, with three different badges used to distinguish the vehicle's configurations. The standard, low, medium, and high configurations of a car have no difference in basic infrastructure, but only some additional features are included. Taking the Honda Accord as an example: it is a mid-size sedan launched by Honda Motor Co., Ltd., with a more sporty exterior design compared to the previous generation. From the side view, the rear features a fastback design, while the side waistline adopts a three-dimensional design that extends from the front to the rear, visually elongating the body length.
3
4
Share

What are the reasons for the starter not rotating?

The reasons for the starter not rotating: 1. Insufficient battery charge or disconnected, loose, or poor contact of the connecting wires; 2. Burned main contacts of the starter electromagnetic switch, open circuit of the pull-in coil or hold-in coil; 3. Open circuit in the starter armature winding; 4. Bent or deformed starter armature shaft, excessive tightness in the assembly of the armature shaft and copper sleeve, friction between the armature core and magnetic poles, causing the starter not to rotate; 5. Severe burning of the commutator, excessive wear of the brushes, brushes stuck in the brush holder, or aging and loss of spring tension in the brush spring. Starters are classified by working principle into DC starters, gasoline starters, and compressed air starters.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.