···
Log in / Register

Will points be deducted if I drive during a traffic restriction period?

4 Answers
VonIsabel
09/05/25 4:36am

Different regions have varying regulations and penalties for driving during restricted hours, typically including warnings, fines, or a deduction of 3 points. Some areas may only issue warnings, some only impose fines, while others may both fine and deduct points. Implementation of traffic restrictions: On one hand, it aims to alleviate urban traffic pressure, and on the other hand, to reduce environmental pollution. During the test events for the 2008 Olympics, Beijing began implementing the odd-even license plate policy, where on odd-numbered dates, only private cars with license plates ending in odd numbers were allowed on the road, and on even-numbered dates, only those ending in even numbers. Driving during restricted hours: If you have just started driving and haven't gone far, it is advisable to turn back. If returning is inconvenient, it is recommended to find a suitable parking spot nearby and wait until the restriction period is over before driving again.

Was this review help?
18
4
Share
JamesDella
09/17/25 5:04am

I'm a car owner with several years of driving experience. I remember last year when I was working in Beijing, I once forgot about the traffic restriction on Tuesday and drove my car with a license plate ending in 3, only to be caught by an electronic eye at an intersection. That time, I got a direct fine of 200 yuan plus 3 demerit points—it was a huge loss! Demerit points are recorded on the driving license, affecting subsequent annual inspections and insurance costs, and in severe cases, they can even lead to a suspension of driving privileges. So, I later developed a habit of checking the traffic restriction calendar corresponding to my license plate in advance, downloading an app to set reminders, or checking the local traffic management authority's official website announcements. Rules vary significantly between cities—for example, Shanghai imposes heavier penalties, with fines of 300 yuan and 5 demerit points, so you need to be extra careful. In short, taking a quick look at the app or listening to the city's traffic radio before driving can help avoid such mishaps. Remember, small mistakes can add up and become a big deal for both your driving record and wallet—stay vigilant at all times.

Was this review help?
6
4
Share
Expand All
ColinLynn
10/31/25 5:33am

As an ordinary person concerned about traffic safety, I always drive very carefully. I understand that violating traffic restrictions will indeed result in penalty points. For example, in big cities like Shenzhen, if caught, you are usually fined 200 yuan and deducted 2 to 3 points, depending on local traffic regulations. Penalty points are not just a punishment; they can also lower your credit score and increase future insurance costs, which is quite troublesome. It's best to confirm the day's traffic restriction rules before traveling, using WeChat mini-programs or navigation apps for real-time reminders—relying solely on memory is too risky. I've found that setting up car stickers or having family members double-check can also help prevent problems. After all, a single oversight can lead to a chain reaction, and the losses outweigh the gains. I recommend everyone develop good daily habits. Paying more attention to road signs and local news updates can help avoid risks—safe driving is the most important thing.

Was this review help?
20
4
Share
Expand All
DeNaomi
12/14/25 5:42am

When I first got my driver's license, I didn't fully understand the traffic rules and drove on a restricted day. As a result, I was stopped by traffic police on-site, fined 150 yuan, and had 2 points deducted from my license. That experience was a profound lesson, reminding me that the consequences of violating traffic rules are severe—not only does it affect the use of your driver's license through point deductions, but it may also increase subsequent handling costs, such as delays in annual inspections. Later, I learned to use smartphone apps to check traffic restrictions or ask colleagues to help verify, avoiding repeat offenses. Spending an extra minute to confirm before daily trips can save a lot of trouble—never underestimate the impact of point deductions.

Was this review help?
19
0
Share
Expand All
More Forum Discussions

how to get donated car

The most effective way to get a donated car is to apply through established charitable organizations that have vehicle donation programs. These nonprofits typically provide cars to low-income individuals, veterans, or families transitioning from welfare to work. Your eligibility is primarily determined by your financial need, employment status, and a demonstrated necessity for reliable transportation. The process usually involves these key steps: Find a Reputable Charity: Research organizations like Goodwill, 1-800-Charity Cars, or local religious and community groups. Verify their 501(c)(3) status to ensure legitimacy. Check Eligibility and Apply: Each program has specific requirements. You'll likely need to complete a detailed application, provide proof of income, and often submit a letter explaining how a car would change your situation (e.g., securing a job, attending medical appointments). Undergo a Screening Process: This may include an interview, a background check, and a review of your driving record. Receive the Vehicle: If approved, you may receive a refurbished car outright or through a low-cost lease-to-own program. Some charities also offer basic maintenance training. It's important to manage expectations. Demand far exceeds supply, and waiting lists can be long. Your application needs to compellingly demonstrate genuine need. Be wary of online scams; never pay an upfront fee to "apply" for a free car. Charity/Organization Typical Vehicle Condition Primary Eligibility Criteria Average Wait Time Program Type Vehicles for Change Refurbished, safety-certified Low-income, employed or in job training 3-6 months Awarded outright Goodwill Auto Auction Varies (as-is) Open to public bidding N/A (Auction) Public auction 1-800-Charity Cars Used, functional Victims of violence, veterans, low-income 6-12+ months Awarded outright Local Religious Groups Varies (donated by members) Members of congregation/community in need Varies by group Gift or low-cost sale Online Charity Hubs Varies Case-by-case basis Highly variable Application-based
9
5
Share

how to fix car scrapes

Fixing a car scrape depends entirely on its depth. For a shallow scratch that doesn't catch your fingernail, you can often fix it yourself with a scratch removal compound and polish. If the scratch is deep, exposing the primer or bare metal, a DIY touch-up paint pen is the most practical solution to prevent rust, though it won't be invisible. For extensive damage into the metal, professional repainting is the only way to restore the finish perfectly. The first step is always to assess the damage. Wash and dry the area thoroughly. Gently run your fingernail across the scratch. If it doesn't catch, the scratch is likely only in the clear coat , which is the top, protective layer of your paint. These are the easiest to fix. If your nail catches, the scratch has gone through the clear coat and into the color coat or even the primer layer beneath. If you see a different colored undercoat or rusty metal, the damage is severe. For clear coat scratches, use a fine-grade rubbing compound or a dedicated scratch remover. Apply a small amount to a clean microfiber cloth and rub in a circular motion with moderate pressure. This process abrades a tiny amount of clear coat to level the surface and make the scratch disappear. Follow up with a polish and wax to restore shine. For deeper scratches that expose the color layer or primer, a touch-up paint pen is your best bet. These are available from your car's dealer or aftermarket suppliers matched to your vehicle's specific color code (found on the driver's side door jamb). Clean the scratch with isopropyl alcohol, shake the pen well, and carefully apply the paint in thin layers, allowing each to dry. It will be noticeable up close but will seal the area from corrosion. The table below compares common DIY repair methods based on scratch depth, cost, and expected results. Scratch Depth Repair Method Estimated Cost Tools Needed Expected Result Best For Clear Coat Only Polish/Compound $15 - $30 Microfiber cloth, compound Near-invisible repair Minor scuffs, swirl marks Into Color Coat Touch-Up Paint Pen $20 - $50 Paint pen, cleaner, applicator Visible but protected Small chips, narrow scratches Into Primer Touch-Up Paint & Clear $30 - $60 Paint pen, clear coat, sandpaper Functional, not cosmetic Preventing rust on deeper scratches Into Bare Metal Professional Repaint $300 - $1,000+ Professional tools Factory-quality finish Large scrapes, perfect results Plastic Bumper Scratch Remover/Touch-Up $15 - $50 Compound or touch-up paint Good cosmetic improvement Surface scrapes on bumpers Attempting to repair a deep scrape with just compound will not work, as there is no paint left to level. The goal in that case shifts from perfection to protection. If the damaged panel is plastic, like a bumper, rust isn't a concern, so a cosmetic fix is sufficient.
1
5
Share

how to make a side car

Building a sidecar is a complex fabrication project best suited for experienced metalworkers and welders. It's not a simple weekend task. The core challenge is creating a safe, stable, and properly aligned unit that doesn't compromise the motorcycle's handling. Safety is the absolute priority , as a poorly built sidecar can lead to catastrophic handling issues. The process begins with designing a frame that matches your specific motorcycle's frame geometry and mounting points. You'll need to fabricate a strong subframe that attaches to the motorcycle's main frame, typically near the headstock bearing and the rear swingarm or frame section. The sidecar's own frame must be rigid, often constructed from steel tubing. The alignment, specifically the toe-in and lean-out , is critical for stable handling; a slight toe-in (the sidecar wheel pointing slightly toward the motorcycle) and a lean-out (the motorcycle leaning slightly away from the sidecar) are standard adjustments. Here is a breakdown of key considerations and potential costs for a DIY project: Aspect Details & Considerations Estimated Cost/Time (DIY) Design & Planning Researching existing kits, measuring motorcycle frame, calculating geometry. 20-40 hours Materials Steel tubing, sheet metal for body, axle, wheel, suspension components, lights. $800 - $2,500 Mounting Hardware High-strength steel plates, bolts, and bushings to attach subframe to motorcycle. $150 - $400 Fabrication Tools MIG/TIG welder, angle grinder, tube bender, drill press, measuring tools. (Tool cost varies greatly) Body Construction Shaping metal or using fiberglass for the sidecar body. 30-60 hours Suspension Sidecar-specific leading or trailing link suspension is necessary for ride quality. $300 - $700 (if bought) Lighting & Electrical Wiring brake lights, turn signals, and running lights to motorcycle's system. $100 - $250 Paint & Finish Priming, painting, and adding upholstery to the sidecar seat. $200 - $500 After assembly, extensive testing in a safe, controlled environment is mandatory. Due to the complexity and safety risks, many enthusiasts recommend purchasing a professionally manufactured sidecar kit and following the manufacturer's installation instructions, which simplifies the alignment process significantly.
17
1
Share

how to match car paint

Matching car paint effectively requires identifying your vehicle's exact color code and understanding the type of touch-up needed. The most reliable method is to use your car's paint code , a unique identifier for its specific color formula. You can find this code on a sticker or plate located in common areas like the driver's side door jamb, glove compartment, or under the hood. Once you have the code, you can order precise touch-up paint from dealerships, auto parts stores, or online retailers. The complexity of matching depends on the paint type. Modern finishes often have multiple layers, including a basecoat (which provides the color) and a clearcoat (a protective, glossy top layer). Simple stone chip repairs on a clearcoated car might only require a basecoat pen. However, blending paint for a larger panel repair is a professional task that requires specialized equipment to feather the new paint into the old, ensuring an invisible seam. Car Manufacturer Common Paint Code Locations Code Format Example Honda / Acura Driver's side door jamb NH-731M (Milano Red) Toyota / Lexus Driver's side door jamb, firewall 3R3 (Super Red) Ford / Lincoln Driver's side door jamb, B-pillar PM (Oxford White) General Motors Service parts label in glove box or trunk WA-862J (Summit White) BMW Driver's side door jamb, strut tower A96 (Mineral White Metallic) Mercedes-Benz Driver's side door jamb, radiator support 197U (Obsidian Black) For older cars where the code is missing or faded, auto parts stores offer paint code scanners that digitally analyze the color. For a perfect match, especially with metallic or pearlescent paints, consulting a professional auto body shop is always the best choice. They use spectrophotometers to digitally match the faded color on your specific car, as sun exposure can alter the original shade over time.
1
5
Share

how to fix a car light

Replacing a car light is a straightforward DIY task that can save you a trip to the mechanic. The core process involves identifying the burnt-out bulb, safely accessing the assembly from behind, swapping the old bulb for a new one without touching the glass, and testing the operation. Most modern vehicles are designed with owner maintenance in mind. The first step is safety . Park on a level surface, turn off the engine, and engage the parking brake. For headlights, allow them to cool completely if they were recently on. You'll need a few basic tools: a package of new bulbs (confirm the correct type in your owner's manual), gloves, and possibly a screwdriver or socket set. Access is typically gained from the engine bay. Open the hood and locate the back of the headlight or taillight assembly. You'll see a dust cover—a round plastic cap—which you twist counterclockwise to remove. Behind it, you'll find the bulb holder. Carefully unplug the wiring harness by pressing the release clip and pulling it straight back. Then, unclip or untwist the bulb holder itself. Crucially, avoid touching the glass of the new halogen bulb with your bare fingers. The oils from your skin can create hot spots on the glass when the bulb is lit, significantly shortening its lifespan. Handle the bulb by its plastic base or use clean gloves. Insert the new bulb, reattach the wiring harness, and reseal the dust cover. Before reassembling everything, turn on the lights to ensure the new bulb works. Here is a quick reference for common bulb types and their average lifespans to help diagnose issues: Bulb Type Common Location Average Lifespan (Hours) Common Reason for Failure Halogen (H7, H11) Low/High Beams 450 - 1,000 Normal wear and tear; vibration LED (Integrated) Daytime Running Lights 15,000 - 30,000 Often a module failure, not user-replaceable incandescent (3157) Taillights, Turn Signals 1,200 - 2,000 Filament breakage from shock Xenon HID (D2S) High-Intensity Headlights 2,000 - 5,000 Ballast or ignitor failure can be mistaken for bulb failure If the new bulb doesn't work, check the corresponding fuse in the vehicle's fuse box. The diagram on the fuse box lid will show you which one controls the lights.
15
4
Share

how to pass cables car

The safest way to pass cables through a car is to route them along existing wire harnesses, tuck them under trim panels and weather stripping, and always use a fuse tap for any connections to the vehicle's electrical system. This prevents damage to your car's interior, avoids creating a safety hazard from loose wires, and ensures a professional-looking installation. Whether you're installing a dash cam, a radar detector, or new speakers, the core principle is to make the wiring as invisible as possible while protecting it from pinching or wear. The most common path is from the fuse box (usually located in the driver's side footwell) up the A-pillar (the vertical post between the windshield and front door) to the top of the windshield. Before you start, disconnect the car's battery to prevent any electrical shorts. Essential Tools and Materials Having the right tools makes the job much easier and safer. Tool/Material Purpose Plastic Trim Removal Tools To pry panels without scratching surfaces. Wire Fish Tape To guide cables through tight spaces. Cable Zip Ties / Adhesive Clips To secure wires to existing harnesses. Electrical Tape / Tesa Tape To bundle wires and prevent rattles. Add-a-Fuse (Fuse Tap) To safely draw power from the fuse box. Multimeter To identify a constant or switched power source. Start by carefully prying off the A-pillar trim. Crucially, route the cable behind the airbag, which is typically mounted on the A-pillar. Never run a cable in front of or over an airbag, as it can become a dangerous projectile during deployment. Tuck the wire into the headliner (the fabric on the ceiling), then guide it down the side of the windshield to the fuse box. Use zip ties to secure your new cable to the car's factory wire harness. For power, use a fuse tap. Use your multimeter to find a fuse slot that is "switched" or "ignition-on" power , meaning it only has electricity when the car is on. This prevents your device from draining the battery. Ground the wire by connecting it to an unpainted metal bolt screwed into the car's chassis. Once everything is connected and secured, carefully reinstall all trim panels and reconnect the battery to test your installation.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.