···
Log in / Register

Will points be deducted for not using turn signals?

4 Answers
Willa
07/29/25 10:02pm

Failure to use turn signals or incorrect use of turn signals will result in a deduction of 10 points each time. The specific regulations are as follows: Not using or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning within less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are 6 instances in Subject 2 where turn signals are required: 1. Turn on the left turn signal when starting the vehicle. 2. Turn on the left turn signal when starting on a slope. 3. Turn on the right turn signal when pulling over for parallel parking, stopping the vehicle 30 cm from the curb before reversing. 4. Turn on the left turn signal before shifting into reverse gear for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to move left. 5. Shift into drive gear and turn on the left turn signal before exiting the parking space in parallel parking, turning it off promptly after exiting. 6. Turn on the left turn signal when entering the area for a right-angle turn, turning it off promptly after completing the turn. Subject 2 has a maximum score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. The C1 and C2 license tests include five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: high-speed toll card collection. The A1, A2, A3, B1, and B2 license tests include: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

Was this review help?
11
0
Share
VanValentina
08/15/25 10:00pm

Not using the turn signal will indeed result in penalty points, which is a basic rule all drivers should know. As an experienced driver, I've seen too many people neglect this detail on the road, only to be caught by cameras or pulled over by traffic police. Not only does it cost 1-2 points directly, but also a fine ranging from 50 to 200 yuan, depending on the region. Accumulating 12 points puts your license at risk – this is no trivial matter. Developing the habit is simple: signal two seconds before changing lanes or turning, giving others time to react. Safety is even more critical – I once witnessed a friend's accident caused by this, resulting in vehicle damage and injuries. I advise everyone not to cut corners; following the rules prevents trouble. Extra caution is needed when driving in cities, and it's especially crucial on highways, where chain reactions can endanger lives.

Was this review help?
2
5
Share
Expand All
OFernando
10/17/25 7:17am

From a safety perspective, failing to use turn signals will definitely result in penalty points, as it's a classic example of dangerous driving. When I first got my license, I neglected it once and almost caused a rear-end collision, which scared me into a cold sweat. The penalty point system is designed to punish such behavior; in most parts of our country, it results in 1-2 penalty points and a fine starting from 100 yuan. More critically, it threatens lives: other drivers can't predict your actions in time, leading to a higher accident rate. Once you develop the habit, interactions on the road become smoother. Remember to signal every turn—it's not just about compliance but also peace of mind. In the long run, it prevents accident costs, and personal safety is worth more than anything. I've cultivated this habit since my novice days, and now it's second nature.

Was this review help?
1
0
Share
Expand All
DiCody
11/30/25 8:02am

I've personally experienced that failing to use turn signals can indeed result in penalty points. Last time I changed lanes without signaling, the traffic police fined me 1 point plus 100 yuan—a lesson learned the hard way. Penalty points don't just mean fines; they also affect your credit record. A friend of mine had multiple violations, and his insurance premiums went up. Now, I always double-check if my signals are on. Following the rules is essentially about civilized driving: small actions ensure safety. I advise new drivers not to be careless—develop good habits to avoid trouble.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

What is the power rating of the BYD Yuan's charging station?

The power rating of the BYD Yuan's charging station is 7000 watts. The BYD Yuan can be charged via household single-phase AC charging, wall-mounted single-phase AC charging box, or single-phase AC charging station. It is beneficial for the battery to charge promptly when the power level drops to the warning red mark. Try to avoid charging only after the battery is completely depleted. Below is more information about the BYD Yuan: 1. Exterior: The design of the Yuan model is similar to other BYD new energy vehicles, featuring a stable design style with dynamic elements. The front face still adopts a purse-like shape, connecting with sharp and deep headlights, making the compact body appear to have a slender and elegant face. The body design presents an upward posture, with raised lines cutting through to create a dynamic atmosphere, and stylish taillights accentuating the stable rear wing. 2. Body dimensions: The body dimensions are 4360 1785 1680mm, with a wheelbase of 2535mm. 3. Powertrain: The BYD Yuan offers two models with a pure electric range of 305KM. Fast charging takes only 0.5 hours to reach 80% battery, while slow charging takes 7 hours. The maximum output power is 70KW/160KW, with peak torque reaching 180N.M/310N.M, fully meeting daily work and life needs.
16
2
Share

What is the battery model for Cadillac XTS?

Cadillac XTS uses an ACD battery, which is a 12V 70Ah battery. Introduction to Cadillac XTS: 1. Engine: The Cadillac XTS is a mid-to-large-sized car under the Cadillac brand, and all models are equipped with a 2.0-liter turbocharged engine. This engine delivers 269 horsepower and a maximum torque of 353 Nm, with the maximum power achieved at 5,300 rpm and the maximum torque available between 2,000 and 5,000 rpm. 2. Body Dimensions: The Cadillac XTS has a length of 5,103 mm, a width of 1,852 mm, a height of 1,502 mm, and a wheelbase of 2,837 mm.
6
0
Share

Does the Camry have a hybrid version?

Camry has a hybrid version, and here are the detailed introductions about it: 1. Power: The maximum power is 150 horsepower, 186 horsepower and 220 horsepower respectively. It is matched with a 7-speed wet dual-clutch transmission. 2. Interior and exterior: The soft materials complement the piano black lacquer panels, with appropriately added chrome trim and double-stitched stripes as well as convex texture trim that provide a good texture. The gear adopts a knob-type design, which is standard equipment for luxury cars, improving the interior decoration effect. Due to the long wheelbase design, the rear seating space is also very spacious.
12
3
Share

Where is the coolant vent hole for Geely Vision X6 coolant replacement?

Geely Vision X6 coolant vent hole is located at the bottom of the trunk. Precautions for coolant replacement: For vehicles that run for long periods, such as taxis, etc. Generally, high-quality coolant should be replaced once a year, while vehicles with shorter running times can be replaced every two years or every 30,000 kilometers. To prevent excessive foam formation, which reduces the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding. Long-life coolant can last up to three years. If suspended matter, sediment, or discoloration is found in the coolant, replace it promptly and clean the system. After draining for about an hour, add new coolant through the radiator hose to allow it to flow quickly into the radiator. Then add another bottle of coolant to the coolant reservoir until it is almost full. Start the engine and let it run for about 10 minutes. At this point, the coolant level will drop slightly as air is expelled from the cooling system. Add more coolant until it reaches the "MAXT" mark on the reservoir. Specific steps: Locate the coolant reservoir in the car engine compartment. Some old coolant will remain in the reservoir; drain all of it. Find the connection point; you can see the pipe behind the condenser. Remove the clamp on the pipe and pull the pipe off directly, allowing the old coolant to drain out completely. Wait until it is all drained. Refill the car with new coolant until the level stabilizes at the marked line in the reservoir.
1
3
Share

Do Automatic Transmission Cars Have Idle Speed When Reversing?

Automatic transmission cars do have idle speed when reversing. The idle speed of a car refers to an operating state of the engine, where the engine runs in neutral. When reversing an automatic transmission car, you only need to control the brake pedal because, on flat roads, the automatic transmission provides sufficient power for the car without needing to press the accelerator pedal. Tips for reversing an automatic transmission car: First, find a suitable parking space, estimate the distance between the car and obstacles, and observe carefully before reversing. Automatic transmission cars are equipped with reversing cameras, which should be used along with the rearview mirror during reversing to avoid collisions. While reversing, adjust the car's body position promptly. The reversing speed should mainly rely on idle speed, though you can gently press the accelerator if necessary, but brake in time according to road conditions to slow down.
4
4
Share

What are the reasons for an automatic transmission car stalling while driving?

Reasons for an automatic transmission car stalling while driving: 1. Generator failure: All electrical equipment in an automatic transmission car is powered by the battery, and the battery's power comes from the generator. Once the generator fails, the ignition system loses power, causing the car to stall; 2. Ignition system failure: The most easily damaged parts in the ignition system are the spark plugs, followed by the ignition coils and cylinder wires. If the spark plugs or ignition coils of two or more cylinders fail, the car will stall; 3. Fuel system failure: If the fuel pressure is too low, it can cause the car to stall. Fuel system failures manifest as fuel line blockages, fuel pump failures, and pressure pump failures. Areas prone to blockages include the fuel pump filter screen, fuel filter, and fuel injectors.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.