Will points be deducted for not using the turn signal when turning right?

2 Answers
Tonya
07/25/25 1:47am
Points will be deducted for not using the turn signal when turning right. Here is some extended information about using turn signals: 1. Turn on the left turn signal: When turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, you should turn on the left turn signal in advance. 2. Turn on the right turn signal: When turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside, you should turn on the right turn signal in advance. 3. Using turn signals: Not using the turn signal when turning is a violation of traffic rules. Therefore, motor vehicles must use turn signals when turning, overtaking, or changing lanes.
Was this review help?
13
3
Share
VonGiselle
08/10/25 4:18pm
As a commuter who drives every day, I'm well aware that failing to signal a right turn can result in penalty points. Under China's traffic regulations, this offense typically incurs a 1-point deduction and a fine of around 200 yuan. Turn signals serve to alert vehicles behind and pedestrians of your intended movement in advance, preventing collisions. Neglecting to signal can easily lead to accidents, such as rear-end collisions or startled pedestrians. I've seen many drivers carelessly forget to signal, only to regret it after being fined. Developing the habit is crucial: activate the signal two to three seconds in advance and turn it off promptly after completing the turn. It's not just about avoiding penalties—it's a fundamental element of safe driving. Extra attention is needed during rain or at night when visibility is low, making this signal even more critical. Consistent practice turns it into a natural reflex.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What are the causes of bearing seizure?

The causes of bearing seizure are: 1. Poor quality of the crankshaft and bearings, with insufficient smoothness of the journal and bearing surfaces. During cold starts, the engine operates under heavy load, preventing the oil from providing adequate lubrication due to its high viscosity at low temperatures, leading to metal fusion and seizure. 2. For vehicles that have undergone major repairs, incorrect installation of main or connecting rod bearings may result in improper clearance adjustment, causing bearing seizure. More details about bearing seizure are as follows: Bearing seizure is one of the most severe engine failures. This phenomenon occurs when severe wear happens between the crankshaft and main or connecting rod bearings due to the absence of an oil film, causing the contact surfaces to reach extreme high temperatures. As a result, the crankshaft journal and bearings sinter and lock together, preventing the engine from rotating.
7
4
Share

How to Turn on the Fog Lights in a Polo?

Steps to turn on the fog lights in a Polo: First, turn on the low-beam headlight switch of the Volkswagen Polo, then pull the knob out one notch to activate the front fog lights, and pull it out another notch to activate the rear fog lights. Additional information about fog lights is as follows: 1. Fog lights are turned on only in foggy conditions. When encountering heavy fog with very low visibility, it is essential to turn on both lights to ensure your vehicle is visible to others. In conditions other than foggy weather with normal visibility, please always turn off the fog lights because their brightness and penetration are very high, which can dazzle other drivers, especially the rear fog lights, which can reduce the warning effect of the rear brake lights. Turning on the rear fog lights in good visibility conditions increases the risk of being rear-ended. 2. In low-visibility conditions such as fog or rain, the front fog lights can assist the headlights, while the rear fog lights alert vehicles behind to the presence of your car. 3. Fog lights are generally used on highways. Additionally, regulations stipulate that vehicles without rear fog lights are not permitted to travel on highways.
19
1
Share

How many liters of engine oil are needed for a Cadillac ATS-L oil change?

Cadillac ATS-L generally requires 5 liters of engine oil, but the specific amount should refer to the vehicle model. You can check the specifications in the car's user manual. Engine oil, also known as motor lubricant, serves functions such as lubrication, friction reduction, auxiliary cooling, rust and corrosion prevention, and shock absorption. More information about engine oil is as follows: 1. Engine oil is also referred to as the lifeblood of a car. It consists of base oil and additives. The base oil is the main component of lubricating oil, determining its properties, while additives compensate for the shortcomings in the base oil's performance. 2. Engine oil is categorized into full synthetic oil and semi-synthetic oil. During operation, the engine requires oil with appropriate viscosity, certain anti-corrosion properties, and cooling capabilities. The right engine oil can maximize the engine's efficiency and extend the lifespan of the gasoline.
4
3
Share

What to Do When the Car Door is Frozen Shut?

When the car lock is frozen, the solutions include: 1. Drive the car to a basement, garage, or other slightly warmer place to park, and the lock will open after a while; 2. Use a lighter to heat the car key, requiring multiple heating sessions, then slowly insert the hot key into the lock to gradually melt the ice inside. However, for keys with chips, avoid overheating them to prevent unnecessary damage; 3. Use a hairdryer to blow hot air directly at the lock cylinder. After continuous blowing for a while, the lock cylinder will thaw. Once the ice melts, immediately clean any water inside the lock cylinder to prevent refreezing; 4. Pour some hot water over the frozen car lock, and the door will thaw shortly. Be sure to clean any water inside the lock cylinder right away to prevent it from freezing again.
18
2
Share

What are the reasons for the sudden increase in fuel consumption of the Qashqai?

After a certain period of use, wear and tear on car components and the accumulation of carbon deposits inside the engine can easily lead to higher fuel consumption. If not addressed in time, this can result in increased fuel costs and potential damage to the vehicle. The sudden increase in fuel consumption of the Qashqai may be due to the following reasons: 1. The air filter is too dirty, reducing the amount of air entering the engine cylinders, leading to insufficient oxygen for combustion and excessive intake vacuum, causing incomplete gasoline combustion. Replacing the air filter can resolve this issue. 2. Excessive carbon deposits on the fuel injectors and throttle body can lead to poor gasoline atomization and incomplete combustion, resulting in higher fuel consumption. Cleaning the carbon deposits will restore fuel consumption to normal levels in the short term. 3. Poor-quality gasoline can form carbon deposits in the combustion chamber or around the valve ports. These deposits cause the engine to inject more fuel during operation, leading to increased fuel consumption. 4. A faulty ignition coil can result in insufficient ignition energy, incomplete combustion, and higher fuel consumption.
3
5
Share

What to Do When the Outside of the Windshield Fogs Up?

When the outside of the windshield fogs up, here are several solutions: 1. Open the windows for air circulation. If the fogging is mild, slightly open both side windows to allow air exchange inside and outside the car. The fog will dissipate when the interior temperature approaches the outside temperature. However, this method is only suitable when the car is moving at low speeds. 2. Lower the fan speed and turn on the external air circulation, then set the airflow to fully blow onto the windshield. This method is slower in defogging and is only suitable for mild fogging. 3. Mix a defogging solution with dish soap and water in a ratio of about 1:10, then apply it to the glass with a cloth. This not only defogs quickly but is also cost-effective. If dish soap is unavailable, windshield washer fluid can also help. 4. If the fog is heavy and neither opening windows nor using wipers works, adjust the air conditioning to warm air, increase the temperature, and direct all airflow to the windshield. The fog will disappear quickly with very noticeable results.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.