Will points be deducted for not shifting to 4th gear in Subject 3?

How to Use the Gears of an Automatic Transmission?

How to use the gears of an automatic transmission: 1. P (Park) is the parking gear, recommended when parking for more than 1 minute; 2. N (Neutral) is the neutral gear, which can be engaged along with the handbrake when parking for 15 seconds to 60 seconds; 3. R (Reverse) is the reverse gear, engaged when reversing the vehicle; 4. D (Drive) is the forward gear, commonly used for daily driving, engaged during normal driving; 5. S (Sport) is the sport mode gear, which delays upshifting to provide more power, useful when overtaking if acceleration feels slow; 6. Pushing the gear lever to the right from D enters manual mode, where pushing forward (toward the + direction) upshifts and pulling backward (toward the - direction) downshifts.

10

4

Share

What are the benefits of shark fin antennas?

Shark fin antennas offer the advantage of enhancing signal reception. Compared to traditional retractable antennas, whip antennas, and window-mounted antennas, shark fin antennas feature a more aesthetically pleasing and stylish design. They integrate powerful automotive electronic functions such as FM, GPS, and GSM, perfectly blending the vehicle's fashion appeal with functionality. During dry weather, cars are prone to static electricity buildup. Previously, this issue was addressed by installing grounding strips near the exhaust pipe to discharge static. With shark fin antennas, this problem is efficiently resolved. By leveraging the principle of electron discharge at sharp points, shark fin antennas channel static electricity to their tapered tips for release. Regardless of their installation position on the vehicle, they effectively reduce surface static electricity.

14

0

Share

Why Are Cars Designed with a Lower Front and Higher Rear?

Cars are designed with a lower front and higher rear to better conform to aerodynamics and reduce wind resistance. When a car travels at high speed, the path of air passing over the top of the car is longer than the path passing underneath. This results in faster airflow and lower pressure above the car, while the airflow underneath is slower and the pressure higher. Modern cars adopt a wedge shape with a lower front and higher rear, allowing the airflow over the sloped surface to generate downward pressure, improving the car's contact with the ground. The exterior design, paint, and color of a car create the first visual impression and directly influence people's perception of the vehicle. These elements are also crucial competitive factors in the automotive market and play a significant role in car design.

1

5

Share

Does a new car involved in a traffic accident lose its six-year exemption from inspection?

If a vehicle eligible for inspection exemption is involved in a traffic accident, it will no longer enjoy the six-year exemption and will instead require biennial inspections. Below are detailed explanations regarding the inspection exemption: 1. Six-year exemption policy: Non-commercial large, small, and mini cars, as well as non-commercial small and mini passenger vehicles registered within six years, are eligible for the six-year exemption. Starting from November 20, 2020, non-commercial small and mini passenger vehicles with 7-9 seats are also included in the exemption scope. 2. Conditions that disqualify exemption: Vehicles that have not been registered for over four years since the date of manufacture. Vehicles involved in accidents causing personal injuries or fatalities. Vehicles with outstanding traffic violations or unresolved traffic accident cases are not eligible for the six-year exemption policy.

7

3

Share

What Causes the Noise When Opening the Door After Turning Off the Engine?

After turning off the engine, the noise when opening the door mainly comes from the door hinges and limiters. Due to years of opening and closing, the door hinges and limiters experience wear and dust accumulation in the gaps, leading to vibration interference and abnormal noises during door operation. You can repeatedly apply engine oil with a cotton swab to the marked areas (red circles) of the door hinges and limiters, then repeatedly open and close the door. Repeat the steps of applying engine oil and operating the door until the noise disappears. The function of the door opening limiter is to restrict the degree to which the door can open. On one hand, it limits the maximum opening angle of the door to prevent it from opening too wide; on the other hand, it keeps the door open when needed, such as when the car is parked on a slope or during windy conditions, preventing the door from automatically closing.

4

0

Share

What is the small button at the back of the ETC device?

The switch at the back of the ETC device is an anti-removal activation switch. Since the ETC device has an anti-tamper function, once it is peeled off from the windshield, the internal switch will automatically deactivate. If the device is removed and activated, the vehicle owner must bring the vehicle registration certificate to the ETC service provider for reactivation. ETC charging principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system uses computer networking technology to perform backend settlement with the bank, achieving the goal of paying tolls without stopping at the toll booth. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line. Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles do not need to stop at toll booths. Reduced wear and tear: Saves costs by minimizing frequent starts and brakes, thereby reducing vehicle wear and fuel consumption. Improved efficiency: Theoretically, ETC lanes can improve vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year Plan" for comprehensive transportation development: "By 2020, the ETC usage rate for road passenger vehicles should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, the future will also promote ETC usage for trucks and explore deep integration between the ETC system and smart transportation developments such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC usage. Precautions for installing ETC: Do not obstruct the driver's view; it is best to install it behind the rearview mirror: Many car models have windshields with a steep rearward angle, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase blind spots for the driver. Installing it behind the rearview mirror on the right side avoids obstructing the view. Avoid interference with charging: The ETC electronic tag requires power but generally does not need charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas of the windshield and positions that might block the solar panel. Do not remove it once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. Once the electronic tag is installed on the windshield, the lever is pressed in. If removed, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. The owner will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To avoid paying for the vehicle in front due to its ETC device malfunction, maintain a distance of at least 10 meters. The ETC lane recognition speed is 20 km/h; exceeding this speed may result in failed fee deductions due to inability to read the device. When using a debit card linked to ETC, insufficient balance may also cause deduction failures.

5

1

Share

Will points be deducted for not shifting to 4th gear in Subject 3?

How to Use the Gears of an Automatic Transmission?

What are the benefits of shark fin antennas?

Why Are Cars Designed with a Lower Front and Higher Rear?

Does a new car involved in a traffic accident lose its six-year exemption from inspection?

What Causes the Noise When Opening the Door After Turning Off the Engine?

What is the small button at the back of the ETC device?

What Are the Reasons for Slight Vibration During Car Idling?

Where to Check the Tire Pressure Monitoring on the Lynk & Co 01?

Where is the Great Wall H6 engine produced?

Is the Scirocco an imported car?