···
Log in / Register

Will points be deducted for improper car body alignment during reverse parking?

4 Answers
SanJesse
08/27/25 3:25am

No points will be deducted. Relevant introduction to reverse parking: Introduction: Reverse parking has been a mandatory test item for obtaining a small car driver's license since 2013. It assesses the driver's ability to maneuver the vehicle in a confined space. Reverse parking is one of the assessment points in the driver's test, which involves correctly reversing the vehicle into a garage from both sides while in motion. There is a time limit for completing reverse parking during the test. Evaluation criteria: Failure to follow the prescribed route or sequence results in disqualification. If the car body crosses the line or fails to enter the parking space, it results in disqualification. Exceeding the 210-second time limit for reverse parking results in disqualification. Stopping midway deducts 5 points each time.

Was this review help?
5
3
Share
KinsleyFitz
09/09/25 2:36am

During my teaching, I've noticed that failing to align the car properly when reversing into a parking space will definitely result in point deductions, as the exam rules clearly require the vehicle to be centered and properly angled. If the car body is tilted, even if the wheels don't cross the line, it shows poor control and may lead to a 10 to 20-point penalty depending on local standards. This can affect the total score and result in failure. Therefore, during practice, adjust the rearview mirrors frequently, aim for reference points accurately, maintain slow speed with minor steering adjustments. Poor parking alignment in daily situations increases the risk of scraping against poles or barriers. With more practice, you'll improve – remember to check ground markings and ensure even front/rear spacing.

Was this review help?
18
2
Share
Expand All
JourneyMarie
10/23/25 3:24am

As an experienced driver, I can say that having a crooked car body during reverse parking will definitely result in point deductions, which is quite common during tests. It's not just about the position; the examiner also evaluates the overall smoothness. A misaligned car body shows you don't have proper control of the steering wheel, and subsequent operations might become messy. My advice is to always check the rearview mirrors and make minor adjustments if you notice any deviation—avoid large turns of the wheel. Even if you're used to driving your own car, switching to a beginner's vehicle can often throw off your positioning. After the test, discuss the examiner's feedback to improve. In short, safety comes first—an unaligned car body affects smooth exiting and increases the risk of hitting objects, so develop good habits during practice.

Was this review help?
1
2
Share
Expand All
OJuliana
12/06/25 3:48am

Improper body alignment during reverse parking is a basic point deduction, which I only realized after passing the test. It indicates insufficient control, possibly due to the tires being tilted to one side. Every deviation is scored during the test, especially in strict driving exams. Practice your sense of direction more, align with the lines using the rearview mirrors, and slow down for easier adjustments. Don't forget safety precautions—misaligned cars may get hit by others after parking. Find an empty parking lot to practice a few times daily; getting used to the centered position reduces issues.

Was this review help?
4
4
Share
Expand All
More Forum Discussions

Why doesn't the Envision use a wet dual-clutch transmission?

The Envision is more suitable for a dry dual-clutch transmission. The difference between dry and wet dual-clutch transmissions lies in the working environment of their clutch plates. A wet dual-clutch transmission has its clutch plates immersed in transmission fluid, while a dry dual-clutch transmission's clutch plates are in direct contact with the engine flywheel. Here are detailed explanations about automotive clutches: 1. Overview: The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. 2. Requirements: Smooth engagement, rapid and thorough disengagement; easy adjustment and repair; compact size; lightweight; good wear resistance and sufficient heat dissipation capacity.
10
5
Share

How to Use the Navigation System in the 2021 Volkswagen Bora?

After starting the vehicle, locate the navigation system on the central control screen, enter the destination, select the driving route, and begin navigation. Below are the relevant details: Body dimensions: The vehicle has a length of 4663 mm, a width of 1815 mm, a height of 1462 mm, a wheelbase of 2688 mm, and a minimum ground clearance of 126 mm. It is a four-door, five-seater sedan with a fuel tank capacity of 50 liters and a trunk capacity of 506 liters. The vehicle is positioned as a compact car.
7
2
Share

How to Switch the Dashboard Theme of Lynk & Co 01

Method to switch the dashboard theme of Lynk & Co 01: There is an up and down adjustment button on the right side of the steering wheel. Press it to switch themes. Below is a related introduction of Lynk & Co 01: 1. Themes: The 10.25-inch full LCD dashboard not only displays a very rich content but also presents a gorgeous effect. It offers four selectable themes to effectively reduce aesthetic fatigue, namely Voyage Theme, Time-Space Theme, Classic Theme, and Secret Realm Theme. 2. Configuration: The new car is equipped with features such as Auto Hold and AQS Air Quality Management System. High-end models also provide a panoramic sunroof, a multifunctional leather steering wheel with paddle shifters, adaptive cruise control, lane keeping, blind spot monitoring, 360° panoramic imaging, and other configurations.
19
5
Share

What is the function of shock absorbers?

Here are the functions of shock absorbers: 1. Generate damping: The shock absorber is one of the very important components in the vehicle suspension system. 2. Composition: The automobile suspension consists of swing arms, elastic elements, and shock dampers. When the wheels roll over uneven road surfaces, affected by the road undulations, the wheels will also move up and down with the road surface. 3. Buffer movement: The elastic elements are used to buffer the up and down movement of the wheels. Without shock dampers, the car body would sway continuously. This is the result of the rebound force of the elastic elements not being converted. 4. Absorb rebound force: Shock dampers are needed to provide appropriate damping to absorb the body sway caused by the rebound force of the elastic elements and make the car body more stable.
16
4
Share

Where is the best location to apply reflective stickers on a sedan?

The optimal positions for applying reflective strips on a sedan are on both sides of the front and rear bumpers, as well as the wheel arches. Below is relevant information about reflective stickers: 1. Introduction: Vehicle reflective markings can enhance the visibility of large vehicles at night, effectively reducing rear-end and collision accidents involving large vehicles. Developed countries such as those in Europe and America have decades of research experience and have established detailed standards for the performance and application of reflective markings. Based on European and American standards, China has also formulated the national standard GB23254-2009 "Reflective Markings for Trucks and Trailers" and the application standard GB7258-2012 "Safety Technical Specifications for Motor Vehicles Operating on Roads". 2. Classification: By color: There are two types—red and white alternating and single-color. Chinese and American standards require vehicle reflective markings to be red and white alternating; European standards specify three single-color reflective markings: yellow, white, and red. The usage areas for these three colors differ: yellow can be applied to the sides and rear of the vehicle body, white can only be applied to the front of the vehicle body, and red can only be applied to the rear of the vehicle body.
2
3
Share

Is the 2022 BMW 5 Series a Major or Minor Facelift?

Here is the relevant introduction about whether the 2022 BMW 5 Series is a major or minor facelift: 1. Major Facelift Model: The 5 Series belongs to BMW and is positioned as a mid-to-large-sized sedan. Judging from the previous generational changes of the 5 Series, the upcoming new 5 Series will be a mid-cycle major facelift, with an expected launch time in September 2022. 2. As a Major Facelift Model: The exterior of the BMW 5 Series is expected to undergo noticeable changes. Although there is no exact information yet on the exterior design of the new model, based on the appearance of other new BMW series, it is anticipated that the new 5 Series will adopt a design similar to the 3 Series, with a further enlarged front grille and a more pronounced sporty feel.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.