Will points be deducted for improper alignment during parallel parking?

1 Answers
McIsabel
07/30/25 5:52am
Points will not be deducted for improper vehicle alignment during parallel parking. Below is relevant information: Key operational steps: Start the car in low gear. When the driver aligns with the reference point, turn the steering wheel to the right. As the car advances until the front is centered, quickly turn the steering wheel left to direct the front toward the left side of the road. When the front nears the left edge line, swiftly return the steering wheel and stop immediately. Shift into reverse gear to back up. When the rear approaches the right boundary line of the parking space, turn the steering wheel fully to the left. Once both sides of the vehicle are parallel with the parking space lines, promptly straighten the steering wheel and stop. Operational tips: Maintain an upright sitting posture, which is crucial for accurately judging reference points. When entering the parking area, park as close to the right side of the road as possible without crossing the yellow right boundary line to avoid reversing too far and crossing the line.
Was this review help?
5
0
Share
More Forum Discussions

What causes the car to feel sluggish and fail to accelerate when the throttle is pressed hard?

When a car feels sluggish and fails to accelerate upon pressing the throttle hard, it may be due to reasons such as excessive engine oil or overly high oil viscosity. Below is relevant information: 1. Poor fuel quality: Shortly after refueling, the engine warning light on the dashboard illuminates. This is usually caused by adding low-quality gasoline from non-standard gas stations, leading to insufficient combustion of the air-fuel mixture during engine operation and triggering the engine warning light. While this does not affect driving safety, it may harm the engine to some extent. 2. Oxygen sensor malfunction: Modern cars are equipped with two oxygen sensors, one before and one after the three-way catalytic converter. The front oxygen sensor detects the air-fuel ratio under different engine conditions, and the ECU adjusts fuel injection and calculates ignition timing based on this signal. The rear sensor primarily monitors the performance of the three-way catalytic converter. Therefore, if the oxygen sensor is damaged or the sensor connector is faulty or loose, it may cause the air-fuel mixture to become too lean or too rich.
9
3
Share

What is the difference between Volvo B4 and B5?

The differences between Volvo B4 and B5 are as follows: 1. Different levels: The Volvo B4 is classified as a mid-to-large-size car; the Volvo B5 is classified as an SUV. 2. Different dimensions: The width and height of the Volvo B4 are 5090mm, 1879mm, and 1450mm respectively; the length, width, and height of the Volvo B5 are 4953mm, 1958mm, and 1776mm respectively. 3. Different transmissions: The Volvo B4 has an 8-speed AT transmission; the Volvo B5 has an 8-speed automatic manual transmission. 4. Different engines: The Volvo B4 is equipped with a 2.0T turbocharged engine plus an electric motor; the Volvo B5 is equipped with a 2.0T mechanical and turbocharged engine.
9
5
Share

What is the fuel consumption of the Mazda6 Atenza 2.0 and 2.5?

The 2020 Mazda6 Atenza with 2.0L engine and 6-speed automatic transmission has a MIIT combined fuel consumption of 6.3-6.4L/100km. The 2020 Mazda6 Atenza with 2.5L engine and 6-speed automatic transmission has a MIIT combined fuel consumption of 7.0-7.1L/100km. Below are relevant details: 1. Fuel consumption variation: Poor driving skills can lead to increased fuel consumption. The same vehicle driven by different people will show different fuel consumption levels. Only by summarizing experience and improving driving skills can the high fuel consumption issues caused by driving techniques be resolved. 2. Precautions: If the fuel consumption is abnormally high, promptly visit a repair shop for maintenance to inspect the engine, cylinders, and pistons to identify the specific cause.
10
4
Share

What brand is the car with a plus sign and a snake logo?

A car with a plus sign and a snake logo is Alfa Romeo. The founder of Alfa Romeo combined two symbols of Milan to create the emblem: the red cross is part of Milan's coat of arms, commemorating the Crusader knights of ancient times, while the dragon-snake pattern comes from the family crest of a local ancient noble family. Alfa Romeo is an Italian car and sports car manufacturer established in 1910, headquartered in Milan, Italy. Its product lineup includes sports car series, sedan series, SUV series, etc. Alfa Romeo's models include: Giulia, Stelvio, ALFA156. Alfa Romeo was founded in 1910, but its predecessor was another company established by Alessandro Darracq in Milan in 1907. Under the leadership of Cavalier Ugo Stella, Alfa produced a series of highly maneuverable products, which made it famous locally and began to become a well-known brand in the automotive market at that time. The earliest famous model was the Alfa 24HP, equipped with an inline 4-cylinder cast iron engine.
14
2
Share

How to Turn on the High Beams on a Chevrolet Cruze?

There are two methods to activate the high beams on a Chevrolet Cruze. The first method involves the driver pulling the left-hand control stalk toward themselves to turn on the high beams. Releasing the stalk will automatically reset it, turning off the high beams. The second method is to push the control stalk away from the driver, which keeps the high beams continuously on. Manually pulling the stalk back to its original position will turn off the high beams. The light emitted by the high beams is parallel, highly concentrated, and very bright, capable of illuminating distant and high objects. Usage scenarios for Chevrolet Cruze high beams: High beams should only be used when there are no other lighting facilities on the road and no oncoming vehicles. Otherwise, they can severely interfere with the vision of other drivers and even cause traffic accidents. Be cautious and avoid mistakenly using high beams instead of low beams. Prohibited usage of Chevrolet Cruze high beams: High beams must not be used in heavy fog, as the reduced air transparency causes the light to scatter diffusely in the air, significantly increasing the impact on oncoming vehicles.
7
5
Share

Will the Engine Stall When Driving Below 10 km/h in Second Gear?

Driving below 10 km/h in second gear will not cause the engine to stall, for the following reasons: 1. First gear is the speed for starting, typically ranging from 0-5 km/h. 2. Second gear corresponds to speeds between 5-20 km/h. 3. Third gear corresponds to speeds between 20-40 km/h. 4. Fourth gear corresponds to speeds between 40-60 km/h. 5. Fifth gear corresponds to speeds between 60-100 km/h. Methods to determine the correct gear shifting timing are as follows: 1. Upshifting timing: When the engine has ample power, it emits a dull sound. After upshifting, if there is no power shortage or shaking of the transmission mechanism, and the vehicle speed increases quickly with smooth and natural driving, it indicates accurate upshifting timing. 2. Downshifting timing: When the vehicle speed and engine RPM continue to drop, and you feel the car lacks power with the engine compartment starting to shake, it's time to downshift. Downshifting too early will cause noticeable jerking, wasting engine power, increasing fuel consumption, and negatively impacting the lifespan of the engine and transmission.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.