Will points be deducted for forgetting to use the turn signal when turning?

1 Answers
Santana
07/29/25 10:55am
Failure to use the turn signal or incorrect use of the turn signal will result in a deduction of 10 points each time. The specific regulations are as follows: Not using or incorrectly using the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning the steering wheel less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are a total of 6 situations in Subject 2 where the turn signal must be used: When starting the vehicle, activate the left turn signal; When starting on a slope, activate the left turn signal; When parallel parking, activate the right turn signal as the vehicle passes the parking spot and stops 30 cm from the curb before preparing to reverse; Before shifting into reverse gear during parallel parking, activate the left turn signal because the steering wheel will be turned fully to the right during reversing, causing the front of the car to shift left; Before exiting the parking space during parallel parking, shift into drive and activate the left turn signal, then turn it off promptly after exiting; When entering the area for a right-angle turn, activate the left turn signal and turn it off promptly after completing the turn. Subject 2 has a maximum score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The test is passed if the following conditions are met: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a parking space, parallel parking, stopping and starting on a slope (canceled for C2), right-angle turns, and driving through curves (commonly known as S-turns) (some regions also include a sixth item: highway toll card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pole tests, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, driving through curves, right-angle turns, passing through a width-restricted gate, driving over continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
Was this review help?
10
4
Share
More Forum Discussions

Which country does the Chevrolet vehicle brand belong to?

Chevrolet is a brand under General Motors, so Chevrolet is an American brand. Most Chevrolet cars seen in China are joint-venture vehicles. Some models under the Chevrolet brand have performed well in sales in China, such as the Cavalier, Cruze, Malibu XL, etc. Here is some relevant information about Chevrolet: 1. Brand Introduction: As the largest brand under General Motors, Chevrolet can be considered one of the most successful automotive brands in the world based on cumulative production volume to date. It ranks first in U.S. sales rankings. Chevrolet offers a very wide range of models, from compact cars to large four-door sedans, from vans to large pickup trucks, and even from SUVs to sports cars. Consumers can find a corresponding model for any type of vehicle they need in Chevrolet's lineup. Since the launch of its first product in 1912, total sales have exceeded 100 million vehicles. Its market covers 70 countries, and it once set a record of selling a new car every 7.2 seconds. In 2004, Chevrolet sold over 3.6 million new vehicles globally, accounting for 5% of the world's total car sales that year. As the most international and popular brand under General Motors, Chevrolet has strong technological and market resources. 2. Brand Culture: The Chevrolet logo represents a stylized bowtie. 'Chevrolet' is named after Louis Chevrolet, a Swiss race car driver and engineer. It symbolizes the elegance, grandeur, and style of Chevrolet cars.
13
2
Share

U-Turn or Turning Around for Cars?

Both 'U-turn' and 'turning around' refer to a car reversing direction. More specifically, 'U-turn' means turning a vehicle or boat in the opposite direction, while 'turning around' refers to reversing direction, both of which can be used in traffic contexts. Below are specific techniques for executing a U-turn: Prioritize Steering Adjustment: During a U-turn, 'steering adjustment' plays a crucial role in changing the car's direction and position. Therefore, beginners should always remember to 'adjust the steering first, then stop' before each halt. Avoid Forcing the Steering Wheel: When making a U-turn, never force the steering wheel (turn it to the limit) before starting or after stopping, as this can damage steering components, increase steering wheel free play, and cause unnecessary tire wear. Before each stop, the distance between the left and right wheels and the roadside will differ. Thus, when judging stopping distance, use the wheel closest to the roadside as the reference. In areas with obstacles or buildings, also pay attention to the front and rear bumpers and the vehicle's height. Use Half-Clutch Technique: On roads with a side slope, you can utilize the terrain and employ the 'half-clutch' technique to rock back and forth for the U-turn without frequent gear changes. Note that the 'half-clutch' should not be used for extended periods, especially not as a substitute for braking. When making a U-turn in hazardous areas like cliffs, deep ditches, or obstacles, position the car's front toward the danger for better visibility. Additionally, after stopping facing the hazard, be extremely careful not to engage the wrong gear when restarting. On sloped roads, strictly follow the hill-start procedures.
11
5
Share

What tires should the Octavia change to?

The principle for changing tires is that the same brand, pattern, specification, load index, and speed rating must be installed on the same axle, with similar tread depth, for safe driving considerations. Tire classification: Automotive tires can be divided into more than 10 types according to their purpose, such as passenger car tires, truck tires, and off-road tires. Based on structure, they can be categorized into radial tires, conventional bias tires, full-size spare tires, and non-full-size spare tires. Tire characteristics: Automotive tires have different characteristics depending on their use. Passenger car tires offer higher comfort, while off-road tires provide better road passability. When selecting tires, it is essential to consider the road conditions the vehicle will be driven on to avoid choosing the wrong type, which could affect tire performance.
8
5
Share

Can I press the brake without pressing the clutch while driving?

Normally, you can press the brake without pressing the clutch to reduce wear on the brake pads. However, during emergency braking, you should press the clutch simultaneously to prevent unnecessary interference from the engine to the braking system. Not pressing the clutch fully when braking can easily cause the engine to stall. In actual driving, when you need to slow down, first press the brake to reduce the speed, and then press the clutch. Regarding the sequence of pressing the clutch and brake: first press the brake to reduce the car's speed, avoiding excessive speed that could lead to severe consequences, and then press the clutch to shift gears. Therefore, the stopping process should be gradual rather than abrupt, as sudden stops can cause significant damage to the car. Decide whether to press the clutch when braking based on the speed: If you are driving at high speed and only need to brake briefly to slow down, there is no need to press the clutch; simply tap the brake lightly. If you are driving at a relatively high speed and need to brake over a longer distance, such as when approaching a red light, you can first press the brake and then press the clutch when the speed drops to a lower level before coming to a stop. If the speed is still relatively high when braking, you don't need to press the clutch. However, if the speed drops to the point where the engine lugs, you should press the clutch to shift to a lower gear or stop, otherwise the vehicle may stall. While driving, the engine provides a deceleration effect. Pressing the clutch is equivalent to shifting to neutral, so when the speed matches the gear, try to avoid pressing the clutch to reduce brake wear and ensure safety.
13
0
Share

What to Do If the Vezel Doesn't Come with Built-in Navigation

The Vezel doesn't come with built-in navigation, but you can replace the original vehicle's infotainment system with a new central control unit that includes navigation functionality. Below is an introduction to the Vezel: 1. Configuration: It is a compact 5-door, 5-seat SUV under GAC Honda, with dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, and a wheelbase of 2610mm. 2. Powertrain: Equipped with a 6-speed manual transmission, a fuel tank capacity of 50L, the engine delivers a maximum torque of 155 Nm at 4600 rpm, and features front-wheel drive.
9
5
Share

What are the causes of the automatic driving light switching failure in the Volkswagen Tharu?

Introduction to the causes of the automatic driving light switching failure in the Volkswagen Tharu: Fault in the settings: It can be restored. Fuse has blown: It needs to be replaced. For a blown fuse, generally, both sides will not light up. If only one side is not working, it is probably not a fuse issue. A fuse, also known as a current fuse, is defined by the IEC127 standard as a "fusible link." Its main function is overload protection. When a fuse is correctly installed in a circuit, it will melt and cut off the current when the current abnormally rises to a certain level and heat, thereby protecting the safe operation of the circuit. Fault in the lighting harness: Inspection and troubleshooting are required.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.