Will passing through a yellow traffic light result in penalty points?

1 Answers
SanColeman
07/29/25 4:21pm
Passing through a yellow traffic light does not result in penalty points. According to the regulations of the Road Traffic Safety Law Implementation Ordinance: When the yellow light is on, vehicles that have already crossed the stop line may proceed. Below is relevant information about traffic signals: 1. Red light on: Vehicles are prohibited from passing; At intersections without non-motor vehicle signals or pedestrian crossing signals, when the red light is on, right-turning vehicles may proceed provided they do not hinder the passage of released vehicles or pedestrians. 2. Green light on: Vehicles are permitted to pass, but turning vehicles must not hinder the passage of released straight-going vehicles or pedestrians. 3. Yellow light on: Vehicles that have already crossed the stop line may continue to proceed.
Was this review help?
11
3
Share
More Forum Discussions

Under what circumstances should low beam headlights be used?

Use low beam headlights in the following situations: 1. In urban areas with streetlights at night, use low beam headlights; 2. When driving in areas without streetlights at night or during dusk when it's getting dark or at dawn when daylight is just appearing, use low beam headlights; 3. In foggy, snowy, or heavy rain conditions where visibility is obstructed, even during the day, turn on low beam headlights; 4. On some road sections where there are lighting facilities but the brightness is insufficient, low beam headlights should also be turned on; 5. When meeting oncoming vehicles within 150 meters on roads without central barriers or centerlines, use low beam headlights; 6. When meeting non-motor vehicles on narrow bridges or narrow roads without central barriers or centerlines, use low beam headlights; 7. When turning at intersections controlled by traffic signals, use low beam headlights.
1
2
Share

How Should a Vehicle Enter a Roundabout?

When entering a roundabout, a vehicle should: 1. For a left turn, choose the left lane inside the roundabout. Before exiting, signal right in advance and change lanes from the inner lane to the outer lane to exit the roundabout. 2. For going straight, select the middle lane inside the roundabout. When preparing to exit and continue straight, signal right to cross the right lane inside the roundabout, alerting other vehicles, and then exit. Driving inside a roundabout requires attention to: 1. All roundabouts are one-way traffic moving counterclockwise; driving in the opposite direction is prohibited. 2. In a roundabout with two lanes, the inner lane is the fast lane. If a driver needs to exit from the inner lane, they should change to the outer lane in advance before exiting appropriately, not directly turning right from the inner lane. 3. Do not activate the left turn signal when entering a roundabout; use the right turn signal when exiting.
17
0
Share

What is the emission standard of Volvo XC60?

Volvo XC60 meets the China VI emission standard. The Volvo XC60 is a mid-size SUV launched by Volvo Cars, with dimensions of 4688mm in length, 1902mm in width, and 1658mm in height, and a wheelbase of 2865mm. In terms of power, this car offers two powertrain options: the T4 version and the T5 version, both equipped with a 2.0T turbocharged engine with different power outputs. The 2.0T low-power engine delivers a maximum power of 140 kW and a maximum torque of 300 Nm, while the 2.0T high-power engine produces a maximum power of 187 kW and a maximum torque of 350 Nm. The transmission system is paired with an 8-speed automatic transmission.
19
0
Share

What is the indicator for an empty fuel gauge

Car no fuel sign is the fuel light comes on. Related introduction: 1. The reason why the fuel indicator light comes on: The amount of fuel is controlled by the float sensor in the fuel tank. After the sensor monitors the fuel level, it feeds this signal back to the ECU, which then conducts a comprehensive analysis and reflects it on the dashboard. If the fuel level is too low, the fuel indicator light will come on. 2. Factors for the fuel indicator light to come on: Fuel level position. The float sensor transmits this information through a simple determination of the liquid level position, which can be said to be related to the shape of the fuel tank to some extent, but this aspect does not vary much among different car models. Recent average fuel consumption. This is mainly a standard considered by the ECU. If driving in the city with frequent stops and starts, the average fuel consumption is higher, then the indicator light will come on earlier; if driving on the highway with lower average fuel consumption, the indicator light will come on later. It is a relatively user-friendly design, and some cars may not be equipped with this function.
17
1
Share

What engine is used in the Mercedes-Benz C200 Coupe?

The Mercedes-Benz C200 Coupe is equipped with two engine options. The 1.6T version delivers a maximum output of 115 kW, with peak torque of 250 Nm and a top speed of 210 km/h. The 2.0T version produces a maximum output of 135 kW, peak torque of 300 Nm, and a top speed of 229 km/h. In terms of safety features, this model comes with front and side airbags for both driver and passenger, knee airbags, tire pressure monitoring, front seatbelt reminder, ISOFIX child seat anchors, ABS anti-lock braking system, brake force distribution, brake assist, traction control, electronic stability program, and autonomous emergency braking.
6
1
Share

What is the function of a car timing belt?

The function of a car timing belt is to ensure synchronization of the engine's operation, including the piston's movement, the opening and closing of valves, and the ignition sequence, all under the coordination of the timing mechanism. The timing belt is a consumable part, and if it breaks, the camshaft will not operate according to the timing, which can lead to severe damage due to the collision between valves and pistons. Therefore, it is crucial to replace the timing belt according to the mileage or time specified by the manufacturer. Being a rubber component, the timing belt, along with its related parts such as the timing belt tensioner, timing belt tensioner pulley, and water pump, will wear out or degrade over time with engine operation. Hence, manufacturers strictly require periodic replacement of the timing belt and its accessories within the prescribed intervals for engines equipped with timing belts.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.