Will opening car windows on the highway result in penalty points?

2 Answers
MacFrancisco
07/28/25 6:37pm
Opening car windows on the highway does not result in penalty points, but it is not recommended to open windows while driving at high speeds because higher speeds create greater wind resistance. If only one window or two windows on different sides are opened, it will generate significant resistance, which can affect fuel consumption. Here are the reasons why it is not advisable to open windows while driving on the highway: 1. Increased fuel consumption: At high speeds, the car's streamlined design effectively reduces wind resistance, but opening windows disrupts the airtightness, leading to greater air resistance and consequently higher fuel consumption. 2. Increased noise: Opening windows at high speeds significantly increases wind noise, reducing comfort. 3. Dirty interior: Driving with windows open on the highway makes the interior/ceiling prone to accumulating dust. 4. Higher risk of traffic accidents: The typical speed on highways is around 120 km/h, and many drivers store luggage or tools in the trunk. Strong winds from open windows can cause imbalance, potentially leading to traffic accidents.
Was this review help?
15
3
Share
OZoey
08/12/25 12:09am
As a driver with nearly 20 years of experience, I believe that opening car windows on highways won't directly result in penalty points, as this isn't stipulated in traffic regulations. I remember once driving on the G4 Highway, I cracked the window for some fresh air—the wind noise was loud, but the police didn't mention it during inspection. The key is not to engage in dangerous actions with the window open, like littering or leaning out, which could be caught on camera and result in fines or penalty points. Opening windows creates significant noise that can distract, and with heavy traffic, there's a risk of flying debris. So, I recommend keeping windows closed and using the AC unless absolutely necessary—it's safer and reduces unexpected risks. On highways, safety comes first; don't let small actions lead to big troubles.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What Causes Incorrect Camshaft Allocation in EA888?

EA888 fault codes mostly occur due to discrepancies in data transmission between the Hall sensor and the crankshaft position sensor. Here are the relevant explanations: 1. Incorrect timing: When this occurs, check whether the timing is correct. Do not rely solely on surface appearances, as some vehicles' crankshaft pulleys may have skipped teeth without notice during belt replacement. Due to issues with the bearing bridge on the intake side, the intake camshaft side of the bearing bridge seat is approximately 1.72mm lower than the standard part. 2. Slower regulator response: When the engine reaches the adjustment speed, misaligned oil passages can cause the regulator to respond more slowly.
11
5
Share

Which subject requires 80 points to pass?

For the Subject 2 driving test, a score of 80 is considered passing for regular cars but failing for large vehicles. Here are the relevant details: 1. Subject 1: The full score is 100 points, with 90 points required to pass. 2. Subject 2: The full score is 100 points. For large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 is required to pass. For other vehicle types, 80 points are sufficient. 3. Subject 3: Both the road driving skills test and the safety and civilized driving knowledge test have a full score of 100 points each, with 90 points required to pass.
4
1
Share

What does the running-in period of a car mean?

The running-in period of a car refers to the initial driving stage of a new car or after a major repair, usually covering 1000 to 1500 kilometers. This is the essential mileage required to ensure that mechanical parts fully contact, friction, adapt, and set. During the running-in period, the ability of various car components to adapt to the environment can be adjusted and improved, and protrusions on the parts can be worn down. The quality of the car's running-in will have a significant impact on the car's lifespan, safety, and fuel economy. Tips for the car's running-in period: 1. Pre-heat the cold car, maintaining idle speed for 1 to 2 minutes, or slowly start when the tachometer drops below 1000 rpm; 2. Shift gears promptly while driving, avoiding the wrong behaviors of high gear with low speed and low gear with high speed, and do not use one gear for a long time (except when using the highest gear at high speed); 3. During the running-in period of a new car, timely maintenance is essential; 4. During the running-in period, the engine is in a critical stage of gradual adaptation, and the small metal particles produced during the operation of its components will mix into the engine oil. If the engine oil is not replaced in time, it will increase the wear of the engine; 5. Ensure the quality of the fuel added.
4
4
Share

How long is an SUV generally?

SUV cars are generally around 4600mm in length. Here is a brief introduction about cars: 1. Invention history: In 1879, German engineer Karl-Benz successfully tested a two-stroke experimental engine for the first time. In October 1883, he founded "Benz & Cie. and Rheinische Gasmotorenfabrik". In 1885, he produced the first Benz Patent Motorwagen in Mannheim. 2. Car definition: (1) Passenger cars. They are primarily designed and technically characterized for transporting passengers and their personal belongings and/or temporary items, with a maximum of 9 seats including the driver's seat. (2) Commercial vehicles. They are designed and technically characterized for transporting people and goods and can tow trailers, but passenger cars are not included.
7
0
Share

Where to Add Urea in JMC Domain Tiger 7?

Urea is filled in a dedicated urea storage tank located near the fuel tank. Here are the specific reasons for adding urea in diesel vehicles: 1. Primarily to reduce exhaust emissions, as the emitted nitrogen oxides can be catalytically reduced by urea's high-temperature hydrolysis of ammonia into harmless nitrogen and water, which are harmless to humans and the atmosphere. Since nitrogen oxides can be catalytically reduced by urea's high-temperature hydrolysis of ammonia into harmless nitrogen and water. 2. The main components of engine exhaust are nitrogen oxides and carbon particles. Diesel engine nitrogen oxides are mainly nitric oxide, and excessive nitric oxide concentration can affect human pulmonary function and cause central nervous system disorders. 3. When dispersed in the air, it converts into nitrogen dioxide, which has a strong irritating odor and can cause respiratory diseases in humans.
17
4
Share

What Does Average Fuel Consumption After Refueling Mean?

It refers to the display of the average fuel consumption of a motor vehicle during operation. Below are the relevant details: 1. Mileage: While the motor vehicle is in motion, the onboard computer records the distance traveled by the vehicle and then calculates the average fuel consumption value based on the amount of fuel consumed by the engine, thereby alerting the driver to the current average fuel consumption of the motor vehicle. 2. Limited Conditions: The average fuel consumption of a motor vehicle under specified conditions refers to the average fuel consumption under restricted circumstances. On level trunk highways above grade three, with test sections longer than 50 kilometers and under normal traffic conditions, the vehicle should maintain a constant speed as much as possible. The average fuel consumption value is calculated based on the distance traveled from start to stop.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.