Will not changing the engine oil for a long time affect acceleration?

1 Answers
StLola
07/30/25 12:20am
Not changing the engine oil for a long time will not affect acceleration. Potential issues from prolonged non-replacement: The oil may deteriorate. Deteriorated oil significantly loses its lubricating properties, leading to sharply increased wear between components. An excessively worn engine can cause symptoms such as weak acceleration during driving, increased engine noise, and engine overheating. How often should car engine oil be changed: Conventional mineral oil is recommended to be changed every 5,000 kilometers. Semi-synthetic oil has a recommended replacement interval of 7,500 kilometers or approximately 7-8 months, while full synthetic oil can be used for 10,000 kilometers or about one year before needing replacement.
Was this review help?
10
5
Share
More Forum Discussions

How to Remove the Fuel Tank Cap of the Tiguan?

The method to remove the fuel tank cap of the Tiguan is as follows: 1. Unlock the car door; 2. Press the fuel tank cap with your hand to make it open automatically; 3. After opening the fuel tank cap, unscrew the screws. The Tiguan is a compact 5-door, 5-seat SUV with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm and a fuel tank capacity of 63 liters. The Tiguan is equipped with a 1.8T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 118 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
18
3
Share

Is the Air Intake Grille Afraid of Water Intrusion on Rainy Days?

If water enters the car's air intake grille, simply wipe it dry as long as it doesn't reach the engine. Only poorly designed air intakes allow water to enter the engine, causing stalling or shaking. Well-designed systems rarely let water into the engine, and even minor water intrusion has no impact. Below are some key points about the air intake grille: 1. Function: The primary roles of the air intake grille are cooling and air intake. If the engine radiator's water temperature gets too high and natural airflow can't fully dissipate the heat, the fan will automatically activate to assist in cooling. 2. Working Process: When the car is running, air flows in reverse, and the fan's airflow direction also reverses. The heated airflow exits from near the windshield behind the engine hood and from beneath the vehicle, effectively expelling the heat.
15
4
Share

What is the first maintenance mileage for Audi cars?

Audi cars require their first maintenance at 5,000 kilometers. The first maintenance refers to the initial service after the vehicle has been driven, primarily including oil and oil filter replacement, along with inspections of key vehicle components. Taking the 2021 Audi A3 Sportback Progressive Sport as an example, it is a compact 5-door, 5-seat hatchback with body dimensions of 4351mm in length, 1815mm in width, and 1458mm in height, with a wheelbase of 2630mm. The 2021 Audi A3 Sportback Progressive Sport is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kilowatts and a maximum torque of 250 Newton-meters. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing a multi-link independent suspension.
6
2
Share

How to Repair Dents in Car Metal?

Dents in car metal can be repaired using small suction cups, which utilize the difference in atmospheric pressure inside and outside to adhere to the object, providing significant pulling force. If the dent is relatively large, you can prepare several suction cups and evenly attach them to the center of the dented area. Car body dents are generally deformations caused by external forces acting on the stamped metal parts of the vehicle's surface. Maintenance solutions include: 1. For minor dents: If the material area remains unchanged, you can use a dolly and an appropriate body hammer to gradually correct the dent; 2. For severe dents with stretched material: If the area is larger than before deformation, first roughly flatten it with a body hammer and dolly, then use filler for repair.
14
1
Share

What engine does the Great Wall Haval H6 use?

The Great Wall Haval H6 uses a turbocharged engine supplied by Shenyang Aerospace Mitsubishi, making it a domestically produced engine. The engine model used in the Great Wall Haval H6 is GW4G15B. The 1.5T version has a maximum power of 124kW and a maximum torque of 285Nm, while the 2.0T version has a maximum power of 169kW and a maximum torque of 385Nm. For daily maintenance of the Great Wall Haval H6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication area, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
8
2
Share

Can I switch from 95 octane to 92 octane gasoline?

Switching from 95 octane to 92 octane gasoline is not recommended. If the owner's manual indicates that the minimum octane rating required is 92, then using 95 octane gasoline is acceptable; however, if it specifies 95 octane gasoline, you should not use 92 octane. Here are some relevant details: 1. Difference: The main difference between 92 and 95 octane gasoline lies in the ratio of n-heptane and isooctane. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. 2. Octane Rating: The octane rating does not indicate the purity or quality of the gasoline. In fact, the octane rating only reflects the gasoline's resistance to knocking and has little to do with its overall quality.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.