Will long-term non-use of highways affect ETC functionality?

What is catchpower tire?

catchpower is not a tire brand, but an economical tire under the windforce brand. The following is a specific introduction to windforce tires: 1. The parent company of windforce tires is Qingdao Windforce Tire Co., Ltd. 2. Windforce tires are mainly for export, while windforce is a new brand established specifically for the domestic market. The following are the reasons for tire damage: 1. Tire cracking, severe wear on the inner wall of the tire. 2. Uneven tread wear. If the tire pressure is too low, the deformation of both sides of the tire increases, the tire contact area widens, the tread arches inward, the shoulder load intensifies, and the middle part pressure decreases, forming a "bridge effect," resulting in uneven tread wear and abnormal wear in sawtooth or wave patterns. 3. Excessive tread wear. If the remaining groove depth of the tire pattern reaches or falls below 1.6 mm (there is an indicator mark for this depth in the longitudinal straight grooves of the tire tread), the tire must be replaced because the tire's drainage capacity has greatly decreased, and the friction between the vehicle and the ground is reduced, making driving more dangerous. 4. Bulging or blistering of the tire. Most cases of tire bulging are caused by strong impacts during use, leading to severe compression deformation between the impact object and the rim flange, forming a bulge. This situation can easily lead to tire blowout hazards.

17

1

Share

What is the weight of the Oshan X7?

The curb weight of the Oshan X7 ranges from 1.9 tons to 2.075 tons. The Oshan X7 is positioned as a compact SUV. Here is additional information about the Oshan X7: 1. The body dimensions are 4705mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2780mm. 2. In terms of power, it is equipped with a 1.5TGDI engine, delivering a maximum power of 131 kW and a maximum torque of 265 N·m. The engine is paired with a wet 7DCT automatic transmission. 3. In terms of features, it comes with the Oshan Intelligent Connectivity System, smart car chip, remote video system, ultra-HD 360-degree panoramic camera, ultra-HD surround-view driving recorder, and a fully automatic parking system, among other configurations.

8

3

Share

What to Do When the Car Makes Abnormal Noises on Bumpy Roads?

When the car makes abnormal noises on bumpy roads, first check if there are sand particles between the brake dust shield and the brake disc on the left front wheel. If present, remove them. Here are the methods to diagnose abnormal noises in a car: 1. Rhythmic noise: This may be caused by friction due to too little clearance between the brake pads and the brake disc. 2. Continuous noise: The bearing may be faulty. 3. Continuous noise: The drive shaft may have an issue. 4. Noise on rough roads: The shock absorber may be faulty. 5. Abnormal noise on smooth roads: This is likely a braking issue. 6. A rhythmic humming noise at low speeds that diminishes at high speeds. Possible cause: The vehicle's wheel alignment is inaccurate, causing uneven tire wear after long-distance driving, leading to abnormal noises.

1

4

Share

How to Check Brake Pad Wear Without Removing the Tire?

Here are the methods to check brake pad wear without removing the tire: 1. Generally, brake pads have wear indicators that protrude about 3 millimeters. If the brake pad wears down to the height of the indicator, it will contact the wear indicator, triggering an alert. The car's dashboard will then illuminate a warning light, indicating that it's time to visit a shop for inspection and replacement. 2. The wear level of brake pads can also be judged by feel. If you notice that the brake pedal feels lighter when pressed. 3. If you feel that braking requires more effort or the car doesn't stop effectively, it indicates severe brake pad wear with insufficient thickness, requiring immediate replacement. 4. Tilt your line of sight at a 15° angle to the plane of the wheel hub and look into the gap between the brake pad and brake disc. This allows you to observe the wear level of the brake pad. A healthy brake pad should be about 1 centimeter thick.

15

3

Share

How to Set the Car Lock Horn?

The car lock horn sound depends on the vehicle model. Some models have a lock horn feature, while others do not emit a sound when locked. Below are the setup methods for models with a lock horn: 1. If the car's computer has a lock horn option, you can enable or disable it through this setting. 2. If the option is not displayed on the car's computer, it can be activated via the bus system. In this case, you will need to visit a 4S shop or a repair shop for setup. 3. Some models allow the owner to manually configure the lock horn. 4. For certain models, you can set the car lock horn using the car key. Press both the unlock and lock buttons simultaneously for 3 seconds until the lights flash once. In this mode, the car will only flash its lights without sounding the horn. To restore the lock horn, press the lock and unlock buttons together again for 3 seconds until the lights flash, indicating successful setup. Below is a detailed introduction to the car lock horn: 1. The lock horn primarily produces sound through electromagnetic vibration. 2. The electromagnetic coil attracts the relay's moving contact switch to close, allowing current to flow to the horn's wiring. This current activates the electromagnet inside the horn, causing the diaphragm to vibrate and produce sound, which is why a sound is emitted when locking the car. 3. Some large trucks use air horns, while electric horns are characterized by their simple structure and compact size.

5

3

Share

What are the pros and cons of eco mode?

Here is a detailed introduction to the pros and cons of eco mode: 1. Advantages: 1. Energy-saving and fuel-efficient. The fuel consumption performance of a car directly affects the cost of car maintenance and can also have a certain impact on the owner's standard of living. 2. ECO mode can make the original car more fuel-efficient, and the fuel-saving effect is even more pronounced for high-displacement vehicles. 2. Disadvantages: 1. ECO mode will change gears more frequently and reduce fuel injection, which lowers fuel consumption at the expense of power. 2. In ECO mode, the throttle will have noticeable lag, resulting in poor acceleration performance. 3. ECO mode is not suitable for high-speed driving.

1

2

Share

Will long-term non-use of highways affect ETC functionality?

What is catchpower tire?

What is the weight of the Oshan X7?

What to Do When the Car Makes Abnormal Noises on Bumpy Roads?

How to Check Brake Pad Wear Without Removing the Tire?

How to Set the Car Lock Horn?

What are the pros and cons of eco mode?

How to Adjust Headlights?

What is the vehicle scrapping period?

What kind of engine oil is best for the Mazda3 Axela?

How Often Should Lexus Transmission Fluid Be Changed?