Will keeping tires at home release formaldehyde?

1 Answers
StellaAnn
07/30/25 8:23am
Rubber products contain a large amount of toxic chemicals such as formaldehyde. Long-term inhalation can easily cause cancer. It is best to place items with rubber odor in a sealed room at home. Introduction: Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. They are usually mounted on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. Required Performance: Tires are often used under complex and harsh conditions. During driving, they endure various deformations, loads, forces, and high and low temperature effects. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
Was this review help?
9
0
Share
More Forum Discussions

At what level of wear should a motorcycle sprocket be replaced?

Here is an introduction to when a motorcycle sprocket needs replacement: 1. High-speed riding: For motorcycles frequently ridden at high speeds, the chain and sprocket set needs to be replaced once the rear wheel adjustment reaches its limit. 2. Snail-type wear: If the sprocket shows snail-type wear, it should be replaced after experiencing chain skipping or slipping. Below is additional information related to motorcycles: 1. Working principle: When the pedal is depressed, the mechanism pressurizes the spring, causing the outer edge of the spring to lift and separate the pressure plate from the friction plate. At this point, the friction plate and flywheel are no longer connected, meaning even if the engine continues to run, power will not be transmitted to the transmission or wheels. This allows the rider to shift gears or stop without stalling the engine. 2. Power transmission: At low crankshaft speeds, the two friction plates do not contact the outer shell, preventing power transmission. At high crankshaft speeds, centrifugal force causes the friction plates to move outward and engage with the outer shell, enabling power transmission.
16
3
Share

How is the BGN rating?

BGN's rating scores are quite fair. Below is an introduction to the relevant content of car rating standards: 1. Mini cars: Also known as A00-class cars, with a wheelbase between 2.0 meters and 2.3 meters, and a body length under 3.65 meters; small cars generally refer to A0-class cars, with a wheelbase typically between 2.2 meters and 2.3 meters; compact cars have a wheelbase between 2.5 meters and 2.7 meters, and a length between 4.2 meters and 4.6 meters. 2. Mid-size cars: Generally, mid-size cars have a wheelbase between 2.7 meters and 2.9 meters, and a body length between 4.6 meters and 4.9 meters; large mid-size cars, also called Executive or administrative sedans, usually have a wheelbase around 2.8 meters to 3.0 meters; luxury cars have a wheelbase exceeding 3 meters and a body length over 5 meters; SUVs can be divided into six levels: small, compact, mid-size, large mid-size, full-size, and extra-large. Generally, SUVs offer more space than sedans of the same class. For example, the space in a small SUV might be closer to that of a compact sedan.
7
2
Share

What causes low fuel rail pressure in the EA888 engine?

Here are the reasons for low fuel rail pressure in the EA888 engine: 1. Fuel line blockage: Blockage in the fuel line or excessive water content in the fuel can lead to low rail pressure. 2. Fuel pipe damage: All cylinder injectors are connected to a common fuel pipe (referred to as the fuel rail), which maintains constant pressure. Damage to this rail can result in low pressure. 3. Injector blockage: If the fuel injectors are clogged or damaged, it can also cause low rail pressure. 4. Malfunction: Low fuel rail pressure is mainly caused by plunger wear, common rail pressure regulator failure, or ECU malfunction.
7
5
Share

How to Deal with the Constant Illumination of the DPF Regeneration Fault Light?

DPF regeneration fault light stays on constantly because there is a large accumulation of soot in the DPF, and the DPF is close to being blocked. The following is an introduction to the working status of the DPF: 1. Automatic Regeneration: The DPF color displays green, and no manual intervention is required at this time. This status generally occurs when the vehicle is driving at high speed (above 80km/h). Maintain normal driving conditions, and the DPF indicator light will automatically turn off once the particulate matter is processed. 2. Manual Regeneration: The DPF yellow indicator light will flash, which generally occurs when the vehicle is driving at low speed (below 80km/h). It can be operated at any time and is suitable for users who only drive in urban areas. For example, after returning home from work, when the vehicle is parked, press and hold the DPF processing button for 3-5 seconds to start the detection. If the yellow indicator light flashes, it means manual regeneration is required. In this case, press the DPF button again, and the yellow indicator light will stay on. Wait for 15-30 minutes, and when the indicator light turns off, it means the particulate matter processing is completed.
4
0
Share

What brand of car is EXEED?

Automotive EXEED translates to Exeed in Chinese. Exeed is a mid-to-high-end brand under Chery. The name 'Exeed' is derived from 'star', symbolizing the vast unknown universe we constantly strive to explore, and 'journey', representing a path of continuous transcendence. For more details, please see below: 1. Brand Introduction of Exeed: Exeed primarily targets the mid-to-high-end and overseas markets. The series is positioned above the Arrizo and Tiggo series, with models mainly built on the M3X platform. Featuring the latest design language, Chery's newest powertrain (including traditional, hybrid, and pure electric options), and the latest system developed by Chery and Baidu, EXEED Exeed will be a masterpiece of Chery's brand upgrade. 2. Production Location of Exeed Cars: Exeed cars are produced in Wuhu, located in the eastern part of Anhui Province, which is the fourth largest automobile manufacturing company in China. Exeed primarily focuses on the mid-to-high-end and overseas markets.
10
5
Share

How to Use the Gears of the 2021 Lavida?

Volkswagen Lavida 2021 has gears P, N, R, D/S. The usage methods are as follows: D gear: Drive gear, press the brake as prompted and push the gear lever downward. S gear: Sport gear, the most powerful gear, gear shifting operation refers to D gear. To cancel S gear, continue to pull backward at the current position. N gear: Neutral gear, press the brake pedal and push forward. R gear: Reverse gear, if in N gear position, continue to push the gear lever upward. P gear: Parking gear, press the brake pedal and push forward to the corresponding position. Manual mode: In "D" gear position, push the gear lever to the right. Move the gear lever upward to shift up and downward to shift down.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.