will insurance pay for rental car during repairs

What are the symptoms of faulty car spark plugs?

The symptoms of faulty car spark plugs include: 1. Electrodes becoming rounded and insulators developing scars; 2. Causing the engine to produce excessive carbon deposits; 3. Electrodes melting and insulators turning white; 4. Difficulty in starting the car; 5. Black smoke from the exhaust pipe; 6. Rough idling; 7. Excessive exhaust emissions; 8. Insufficient power. Car spark plugs are categorized into: 1. Standard spark plugs: The insulator skirt slightly recedes into the shell end face, with the side electrode outside the shell end face; 2. Insulator-protruding spark plugs: The insulator skirt is longer, protruding beyond the shell end face; 3. Fine-electrode spark plugs: The electrodes are thin, characterized by strong sparks and better ignition capability.

2

4

Share

Shell or Mobil Oil for Japanese Cars?

Both Shell and Mobil oils are suitable for Japanese cars, provided that the correct oil grade is selected. Engine oil is a lubricant composed of base oil and additives. The functions of engine oil include: assisting in engine lubrication and wear reduction, cooling, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Engine oils can be categorized based on usage conditions: 1. Diesel engine oil: selected based on the combined mechanical and thermal load of the car engine and the severity of engine operating conditions; 2. Gasoline engine oil: chosen according to the severity of engine operating conditions, additional devices in the car's intake and exhaust systems, and the production year. The hazards of using inferior quality oil are: 1. Degrading the oil quality, reducing its performance; 2. Damaging the lubrication of precision parts in the fuel pump and injector; 3. Reducing the power output of the generator set; 4. Affecting the combustion efficiency of the engine.

9

0

Share

What to Do When Throttle Response Slows Down?

The solutions for slow throttle response are: 1. Check the gasoline pressure and cleanliness, and replace the gasoline filter; 2. Inspect the ignition system, cylinder wires, and spark plugs; 3. Check the cylinder pressure to see if the engine is misfiring; 4. Examine the intake and exhaust pipelines for blockages; 5. Verify the ignition timing, throttle position sensor, and idle motor; 6. Use higher-quality gasoline. The throttle controls the engine's air intake by adjusting the opening of the throttle valve, which in turn regulates the air intake. The computer then controls the fuel injection, thereby managing the engine's speed. The functions of the throttle are: 1. To control the engine speed by adjusting the pedal pressure; 2. The throttle regulates the carburetor to determine the engine's output power.

19

3

Share

What grade of gasoline can be used for the Changan CS35?

The Changan CS35 can use 92-octane gasoline. Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation, cracking, or pyrolysis, and can be used as fuel. The body dimensions of the Changan CS35 are: length 4170mm, width 1810mm, height 1670mm, with a wheelbase of 2560mm, a minimum ground clearance of 180nm, and a fuel tank capacity of 52 liters. The Changan CS35 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 92kW and a maximum torque of 160Nm, paired with a 5-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam rear suspension.

18

4

Share

Why is there a jerking sensation when shifting gears?

The reason for the jerking sensation when shifting gears is the mismatch between engine speed and wheel speed. Gear shifting is the abbreviation for the operation method of the gear lever, which refers to the driver's psychological and physiological movements to continuously change the position of the gear lever according to road conditions and vehicle speed. The solutions to the jerking sensation when shifting gears are: 1. Adjust the shifting speed; 2. Adjust the gear engagement sequence; 3. Shorten the shifting time; 4. Lightly press the throttle when shifting; 5. Adjust according to road conditions and load; 6. Adjust by controlling the clutch release timing.

3

5

Share

What causes the noise during shock absorption in a Mercedes-Benz E300L?

Noise during shock absorption in a Mercedes-Benz E300L is caused by abnormal shock absorbers. Procedure for checking shock absorbers when noise occurs: Most noise from the shock absorbers in a Mercedes-Benz E300L is due to oil leakage. To check for oil leakage, inspect the shock absorber housing or dust cover when it hasn't rained or the car hasn't been washed. Alternatively, press down on the upper part of each wheel's suspension, such as the front and rear fenders. A faulty shock absorber will feel unusually stiff when pressed, which is a symptom of advanced oil leakage. Faulty shock absorbers can only be replaced and cannot be repaired. Causes of noise during shock absorption: Noise during shock absorption in a Mercedes-Benz E300L may be caused by loose or deformed chassis components, tire noise, front or rear wheel bearings, or various issues from installation, replacement, or maintenance, such as improperly tightened screws, component interference, incorrect positioning, or reverse installation.

16

5

Share

will insurance pay for rental car during repairs

What are the symptoms of faulty car spark plugs?

Shell or Mobil Oil for Japanese Cars?

What to Do When Throttle Response Slows Down?

What grade of gasoline can be used for the Changan CS35?

Why is there a jerking sensation when shifting gears?

What causes the noise during shock absorption in a Mercedes-Benz E300L?

Should turbocharged cars use 92 or 95 octane gasoline?

What does continuously variable transmission in automotive gearboxes mean?

How to Remove Paint Stains from a Car?

Which Letter Represents Reverse Gear in an Automatic Car?