Will I not be exempt from highway tolls in 2020 if I don't install ETC?

Is there a waterlogging insurance for cars?

Waterlogging insurance has been incorporated into the vehicle damage insurance. Not only waterlogging insurance, but also comprehensive insurance coverage such as full vehicle theft insurance, separate glass breakage insurance, spontaneous combustion insurance, no deductible rate, designated repair shops, and third-party special agreements have been integrated into the vehicle damage insurance, making its coverage more comprehensive. In past claim disputes, glass insurance and waterlogging insurance accounted for the majority. Relevant information about compulsory traffic insurance is as follows: 1. Introduction: The full name of compulsory traffic insurance is 'Compulsory Traffic Accident Liability Insurance for Motor Vehicles'. It is a mandatory liability insurance where the insurance company compensates for personal injury, death, and property damage (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured motor vehicle, within the liability limits. 2. Necessity: Compulsory traffic insurance ensures compensation for victims of motor vehicle road traffic accidents and promotes road traffic safety. It provides timely and basic protection for traffic accident victims.

9

2

Share

Does a Larger or Smaller Speed Ratio Save More Fuel?

Smaller speed ratios save more fuel. Below are relevant details about speed ratios: 1. Definition of speed ratio: It refers to the gear transmission ratio of the main reducer in a vehicle's drive axle, equal to the ratio of the rotational angular velocity of the drive shaft to that of the axle's half-shaft, or the ratio of rotational speeds. When motors employ other speed control methods, such as variable frequency speed regulation or slip speed regulation, the ratio of the motor's maximum speed to its minimum speed is also termed the speed ratio, indicating the range of speed regulation. 2. Dual-speed ratio: Under no-load conditions, a smaller speed ratio is used to achieve fuel savings and extend the vehicle's service life. The development of dual-speed ratio heavy-duty trucks will be one of the future directions in the heavy-duty truck industry.

11

5

Share

Does Leaving the Headlights On After Turning Off the Engine Drain the Battery?

Leaving the headlights on after turning off the engine will drain the car battery, but the power consumption is minimal. After the engine is turned off, the generator stops working, and the only power source for the entire vehicle is the battery. If the headlights are left on for an extended period, it can easily lead to battery depletion, affecting engine startup and shortening the battery's lifespan. If no lights are on after the power is turned off, there will be no power consumption. Therefore, it is recommended to turn off automatic headlights after shutting off the engine to develop good habits. Below are situations that should be avoided to prevent increased car power consumption: 1. Long-term parking: The usage time of the car battery is the main cause of depletion. Typically, a car battery has a lifespan of two to three years. If this period is exceeded, the battery is highly likely to deplete after just two or three days of parking. 2. Forgetting to turn off lights and onboard electronics: Many new car owners often make the mistake of forgetting to turn off interior lights when parking and turning off the engine. After a night of consumption, the battery may run out of power at any time, making it impossible to start the car. In such cases, if conditions permit, try charging the battery. If that doesn't work, the battery may need replacement. 3. Forgetting to turn off the air conditioning before shutting off the engine: Most car owners are accustomed to leaving the air conditioning on or letting it start automatically when the vehicle is turned on. This causes the air conditioning system to activate every time the ignition is turned on, resulting in an immediate high power load on the vehicle. Over time, this can cause significant wear and tear on the battery.

2

Share

What is the reason for the EBD warning light appearing in the vehicle?

When the EBD light illuminates, it indicates a problem with the Electronic Brakeforce Distribution control system, most likely caused by sensor or fuse malfunctions. This issue requires immediate attention as it may affect the vehicle's normal operation. Drivers should proceed with caution at low speeds and promptly visit a repair shop for inspection. Below is more information about the EBD system: 1. Function: Vehicles equipped with the EBD system automatically detect the adhesion conditions between each wheel and the road surface, appropriately distributing the braking force generated by the braking system to all four wheels. With the assistance of the EBD system, braking force can be utilized most efficiently, significantly reducing braking distance while maintaining vehicle stability during braking, thereby enhancing driving safety. 2. Working Principle: During emergency braking, before the ABS activates, the EBD system compares the slip rate of the rear wheels to that of the front wheels based on the vehicle's weight and road conditions. If it detects a difference that needs adjustment, the brake hydraulic system will modify the hydraulic pressure transmitted to the rear wheels to achieve a more balanced and closer-to-ideal distribution of braking force.

3

5

Share

What are the reasons for the airbag light in the Baojun 310 coming on?

The illumination of the airbag light in the Baojun 310 indicates a malfunction in the vehicle's airbag system, requiring prompt repair at a service center. Below is more information about airbags: 1. Composition: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is typically located on the dashboard. 2. Principle: When a collision occurs during driving, the airbag sensors first receive the impact signal. If the impact reaches the specified intensity, the sensors activate and send a signal to the electronic controller. Upon receiving the signal, the electronic controller compares it with its stored data. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag module. The gas generator then ignites the gas-generating agent, producing a large volume of gas. After filtration and cooling, the gas fills the airbag, causing it to rapidly inflate and break through the padding in an extremely short time.

9

5

Share

What is the wading depth of a Mercedes-Benz?

According to different Mercedes-Benz models, the wading depth varies. Generally, the maximum wading depth should not exceed half the height of the car tires. Here is some relevant information about Mercedes-Benz: 1. Introduction: Mercedes-Benz is a world-renowned luxury car brand. 2. Brand History: It is praised for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. Internationally, the brand is usually referred to as Mercedes, while in mainland China, it is called "Benz," in Taiwan, it is translated as "Benz," and in Hong Kong, it is translated as "Ping Zhi."

8

4

Share

Will I not be exempt from highway tolls in 2020 if I don't install ETC?

Is there a waterlogging insurance for cars?

Does a Larger or Smaller Speed Ratio Save More Fuel?

Does Leaving the Headlights On After Turning Off the Engine Drain the Battery?

What is the reason for the EBD warning light appearing in the vehicle?

What are the reasons for the airbag light in the Baojun 310 coming on?

What is the wading depth of a Mercedes-Benz?

What Causes the Manual Gear Stick to Be Hard to Move?

What Causes a Sudden Increase in Fuel Consumption in Winter?

Why Does the Buick Regal Dashboard Light Dim?

Are Scratches More Common on Black Cars?