Will I get points deducted if I'm caught driving at 104 in a 100 speed limit zone?

What does it mean when the PCS yellow light is on in a Toyota vehicle?

This indicates the Pre-Collision Safety System. Here are the details: 1. Introduction: Toyota's Pre-Collision Safety System is called Pre-Collision-System, abbreviated as PCS. Its luxury brand Lexus was one of the first to apply the pre-collision safety system to mass-produced vehicles and has always been at the world-leading level. 2. Development: The PCS Pre-Collision Safety System first appeared in the 2003 Lexus LX and RX models. The sensor for this system is a millimeter-wave radar installed at the front of the vehicle. This radar can automatically detect obstacles ahead and calculate the possibility of a collision. If the system determines that a collision is highly likely, it will sound an alarm to alert the driver to take evasive action. At this point, other active safety devices will also be integrated, and the Brake Assist (BA) will enter a ready state to assist the driver in braking the vehicle.

14

3

Share

What is the fuel consumption of the Toyota Vios 1.5 automatic transmission?

Toyota Vios 1.5L automatic transmission has a combined fuel consumption of approximately 7.5 liters per 100 kilometers. The following is relevant information about the Toyota Vios: 1. Body dimensions: The Toyota Vios is a compact 4-door 5-seater sedan with body dimensions of 4435mm in length, 1700mm in width, 1490mm in height, and a wheelbase of 2550mm. 2. Configuration: The Toyota Vios is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, with a maximum power output of 81 kilowatts and a maximum torque of 138 Newton meters. The drive system is front-wheel drive. 3. Suspension: The front suspension uses a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension.

5

1

Share

What is the original oil specification for Toyota IZOA?

The original oil specifications for Toyota IZOA are 0W-16, 0W-20, 5W-20, 5W-30, 10W-30, or 15W-40 engine oil. Any oil model that meets these specifications can be used. For later maintenance and oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of the oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high temperatures. The method for changing the oil in Toyota IZOA is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan; Loosen the oil drain plug with a wrench and use an oil pan to catch the old oil until no more oil flows out. Start the engine for 30 seconds to allow the oil in the main oil passage to drain; Remove the oil filter with a special wrench; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for oil leaks around the drain plug and oil filter. If there are any leaks, perform repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.

10

4

Share

How Long is the Fit

First remove the front bumper, then unscrew the headlight bolts to detach the headlight. The 2019 Fit measures 3900mm in length, 1695mm in width, and 1525mm in height. Below are relevant details about the Fit: 1. Vehicle Design: The third-generation Fit (FIT) adopts "Exciting-H Design" as its overall design philosophy, featuring Honda's latest family-style front grille concept "Solid Wing," where the grille and headlights are integrated to highlight sharpness and sportiness. The side profile employs a distinctive sporty blade-style double waistline design, creating an eager forward momentum. The dynamic rear styling paired with LED taillights presents a more premium texture. 2. Configuration: The third-generation Fit (FIT) is the first to be equipped with Honda's new Earth Dreams Technology engine. The new 1.5L direct-injection DOHC i-VTEC engine delivers a maximum power of 96kW at 6600rpm and a peak torque of 155N·m at 4600rpm, leading its class in performance. Combined with the new CVT transmission, the third-generation Fit (FIT) achieves the lowest fuel consumption in its class at just 5.3L per 100km.

19

3

Share

What are the Toyota engine models?

Depending on the different models under Toyota, the engines also vary. The engine model is 9NR/8NR, with a maximum horsepower of 116 hp, maximum power of 85 KW, maximum power speed of 5200-5600 rpm, and maximum torque of 185 Nm. The engine model is M20A/M20E, with a maximum horsepower of 178 hp, maximum power of 131 KW, maximum power speed of 6600 rpm, and maximum torque of 210 Nm. The engine model is A25A/A25G, with a maximum horsepower of 209 hp, maximum power speed of 6600 rpm, maximum power of 154 KW, and maximum torque of 250 Nm. Toyota car engines are produced according to the vehicle's origin: domestic model engines are produced in China; imported model engines are produced in Japan, Southeast Asia, or the United States. For daily maintenance of Toyota engines, the following methods can be used: use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's requirements; regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil volume moderate; when oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it will burst the filter element or open the safety valve, bypassing and bringing dirt back to the lubrication area, accelerating engine wear and increasing internal pollution; regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and cylinder wall, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear; regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

19

2

Share

What car is the 4109?

4109 refers to the Honda Fit. Below are some key details about the Fit: 1. Vehicle Design: The third-generation Fit (FIT) adopts the "Exciting-H Design" as its overall design philosophy, featuring Honda's latest family-style front grille concept called "Solid Wing," where the grille and headlights are seamlessly integrated to highlight a sharp and sporty look. The side profile incorporates a distinctive "Blade" dual waistline design, creating an eager-to-move-forward momentum. The dynamic rear styling, paired with LED taillights, exudes a more premium feel. 2. Configuration: The third-generation Fit (FIT) is the first to be equipped with Honda's new Earth Dreams Technology engine. The all-new 1.5L direct-injection DOHC i-VTEC engine delivers a maximum power output of 96 kW at 6600 rpm and a peak torque of 155 N·m at 4600 rpm, ranking it as the top performer in its class. Combined with the new CVT continuously variable transmission, the third-generation Fit (FIT) achieves the lowest fuel consumption in its segment at just 5.3L per 100 km.

13

5

Share

Will I get points deducted if I'm caught driving at 104 in a 100 speed limit zone?

What does it mean when the PCS yellow light is on in a Toyota vehicle?

What is the fuel consumption of the Toyota Vios 1.5 automatic transmission?

What is the original oil specification for Toyota IZOA?

How Long is the Fit

What are the Toyota engine models?

What car is the 4109?

Why Do Cars Experience Brake Failure?

Can I Replace Car Brake Pads Myself?

Can Car Brakes Be Adjusted for Tightness?

How to Adjust the Audio Tuning for the Best Effect in the Avalon?