Will I Get Points Deducted for Making a U-Turn After Entering a One-Way Street by Mistake?

1 Answers
OKathryn
07/29/25 1:54pm
Making a U-turn after entering a one-way street by mistake will result in a deduction of 3 points. According to the "Scoring Standards for Road Traffic Violations," motor vehicle drivers committing any of the following violations will be penalized with 3 points: 1. Driving a truck with cargo exceeding the approved load capacity by less than 30%. 2. Driving a motor vehicle on a highway below the minimum speed limit. 3. Driving a motor vehicle prohibited from entering the highway onto the highway. 4. Driving a motor vehicle on a highway or urban expressway without following the designated lane. 5. Driving a motor vehicle in violation of regulations while towing a trailer.
Was this review help?
1
3
Share
More Forum Discussions

What Sound Does a Faulty Tensioner Make?

A faulty tensioner typically produces a buzzing or squeaking abnormal noise. Symptoms of a damaged tensioner include increased fuel consumption, lack of power, engine knocking, and other malfunctions. The tensioner's function is applied to the engine's timing belt or timing chain, providing guidance and tension to maintain them in an optimal tensioned state. Tensioners are generally categorized into hydraulic and mechanical types, both capable of automatically adjusting the tension of timing belts and chains. The removal method for a tensioner involves: driving the vehicle onto a lift, disconnecting the battery, removing the hose bracket, inserting a tool into the dedicated opening of the belt tensioner, then using a wrench to turn the automatic belt tensioner clockwise and loosening the engine auxiliary system belt. Finally, loosen the fixing screws according to the belt tensioner wheel to be removed.
2
2
Share

Will PU Invisible Car Film Leave Adhesive Residue?

PU invisible car film may leave adhesive residue. Here is more relevant information: 1. Reasons for adhesive residue: (1) During installation, if the paint surface is not thoroughly cleaned (or improper cleaning agents are used), residues on the paint surface may react chemically with the adhesive, causing peeling. (2) The adhesive layer of the invisible car film lacks sufficient heat resistance. Under high temperatures and sunlight, chemical reactions occur, altering the material and leading to peeling. Therefore, apart from incorrect installation, the issue of adhesive residue after removing the invisible car film is primarily due to problems with the product's adhesive layer. 2. Materials of invisible car film: (1) PVC material is relatively hard, prone to yellowing, mostly domestically produced, with very sticky chemical adhesives. (2) TPH material is very soft and easily torn, offering slight scratch repair capability but also very prone to yellowing. (3) TPU material significantly improves toughness, has good yellowing resistance, and offers strong scratch repair capability.
9
3
Share

What is the difference between 85w90 and 85w140 gear oil?

85w90 and 85w140 gear oils differ in viscosity: 85w140 has higher high-temperature viscosity, while 85w90 has lower high-temperature viscosity. The replacement interval for gear oil varies depending on different situations: 1. If synthetic oil is used, it does not need to be replaced within 200,000 kilometers; 2. If mineral oil is used, it should be replaced every 40,000 to 60,000 kilometers. Gear oil, also known as transmission oil, can reduce wear on gears and other moving parts, extend gear life, reduce friction, and minimize power loss. Precautions for using gear oil: 1. Add and change it promptly; 2. Replace the gear oil in a timely manner; 3. If the generator, starter carbon brushes, or rotor of the vehicle are contaminated with lubricating oil or grease, it may lead to poor performance or failure to operate.
7
5
Share

What data is displayed on the dashboard screen of the New Bora?

The dashboard screen of the New Bora displays the following fixed information at the bottom: outside temperature gauge, cruise control digits, and passenger seat display. Additionally, it features switchable display functions. Below are the relevant details: 1. Functions of car dashboard instruments: To provide drivers with necessary operational parameter information of the vehicle. 2. Composition: The car dashboard consists of various instruments and indicators, particularly warning lights and alarms for the driver. Based on different working principles, car instruments can be roughly categorized into three generations. 3. Traditional speedometer: The traditional speedometer is mechanical. A typical mechanical odometer is connected to a flexible shaft, which contains a steel cable. The other end of the flexible shaft is connected to a gear in the transmission. The rotation of the gear drives the steel cable to rotate, which in turn rotates a magnet inside the odometer cover. The cover is linked to the pointer and, through a hairspring, positions the pointer at zero. The speed of the magnet's rotation affects the magnitude of the magnetic field lines, disrupting the balance and thereby moving the pointer.
1
5
Share

How to Replace Coolant by Yourself?

Methods for replacing coolant by yourself: 1. Turn the car key forward to shut off the engine; 2. Let the engine sit until the water temperature drops to room temperature; 3. Open the front engine hood; 4. Unscrew the cap of the small water tank and release the pressure in the cooling system; 5. Add coolant to the small water tank up to the MAX limit. Functions of coolant: 1. Provides anti-corrosion protection for components of the cooling system; 2. Prevents scale formation to avoid reducing the radiator's cooling effect; 3. Ensures the engine operates within the normal temperature range. Precautions for using coolant: 1. Avoid mixing different types of coolant; 2. Do not choose inferior quality coolant; 3. Do not directly add undiluted coolant concentrate to prevent coolant deterioration and low-temperature thickening.
12
0
Share

What is the fuel consumption of Civic per 100 kilometers?

Civic's fuel consumption per 100 kilometers varies depending on the model. Here are the main scenarios: 1. Civic manual transmission: The fuel consumption is around 6.8 liters per 100 kilometers. 2. Civic automatic transmission: The fuel consumption is around 7.5 liters per 100 kilometers. Here is some additional information: 1. Instantaneous fuel consumption: This refers to the fuel consumption at a specific moment. When the car is moving, it is displayed in liters per 100 kilometers, and when the car is stationary, it is displayed in liters per hour. Therefore, instantaneous fuel consumption is complex to calculate, fluctuating significantly and generally has little reference value. 2. Average fuel consumption: The commonly referred-to fuel consumption is the average fuel consumption, usually calculated per 100 kilometers, also known as fuel consumption per 100 kilometers. Simply put, it indicates how many liters of fuel the car has consumed over the most recent 100 kilometers.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.