Will I get points deducted for driving at 135 km/h in a 120 km/h speed limit zone?

Can a BYD F0 that has been driven for ten years still be driven?

As long as regular maintenance is performed, even a 10-year-old car can still be driven. Here is some relevant information about the BYD F0: 1. Vehicle dimensions: The BYD F0 is a microcar under the BYD brand, with a length, width, and height of 3460mm, 1618mm, and 1465mm respectively, and a wheelbase of 2340mm. 2. Engine: It uses a 1.0-liter naturally aspirated three-cylinder engine, delivering 68 horsepower and a maximum torque of 90 Nm. This engine is equipped with multi-point fuel injection technology and features an aluminum alloy cylinder head and block. 3. Performance: Although the F0 is compact, it has larger tire sizes compared to the Lu Bao and QQ3. The standard sound and light reminder system for seat belts highlights BYD's technological concepts in car manufacturing.

2

Share

What is the solution for not burning urea?

The solution for not burning urea is: 1. Check whether the post-processing harness and sensors are in normal contact, and adjust or repair them in time if there are problems; 2. Check whether the urea pipeline is normal and whether there is any leakage. If there is, it needs to be replaced in time; 3. Check whether the urea pump is working normally. Once abnormal operation is found, the cause of the fault needs to be checked in time; 4. Check whether the urea nozzle is working normally. If the nozzle is found to be blocked or cannot be opened normally, it should be cleaned or replaced in time. More relevant information is as follows: 1. Automotive urea, also called exhaust treatment fluid, is a liquid used in SCR technology to reduce nitrogen oxide pollution in diesel vehicle exhaust. 2. If the vehicle does not burn urea, it means the SCR system is not working properly. Although it can save urea costs, the chemicals inside will quickly oxidize, and the urea nozzle will also become blocked, causing the entire system to be scrapped.

14

4

Share

Where is the Jimny's four-wheel drive control box located?

Next to the front axle differential, there is a four-wheel drive control vacuum box. Here is some related information: 1. Introduction: The Jimny's four-wheel drive system is a part-time four-wheel drive, which uses a transfer case to distribute power to the front and rear axles. On the center console panel inside the vehicle, there are three buttons: 2WD, 4WD, and 4WD-L. The driver can switch between high-speed two-wheel drive, high-speed four-wheel drive, and low-speed four-wheel drive modes using these buttons. 2. Operation: When switching from two-wheel drive to four-wheel drive, the Jimny must be traveling at a speed below 100km/h and must be moving in a straight line, and vice versa. Switching between 4WD and 4WD-L must be done when the vehicle is stationary. In general, it is recommended to avoid switching to four-wheel drive while the vehicle is in motion.

16

4

Share

Reasons for the Yellow Engine Warning Light?

It is when the vehicle experiences a power failure that the yellow engine warning light is triggered. The vehicle must be stopped under safe conditions. If the light comes on immediately after starting the vehicle, turn off the engine, wait a few minutes, and then restart. If the issue persists, contact a repair shop for inspection. The reasons for the yellow engine warning light on the dashboard are as follows: 1. Poor contact: When the water temperature, crankshaft position, air flow, intake temperature, or oxygen sensors have poor contact or signal interruption, the vehicle's ECU cannot accurately obtain engine failure data; 2. Blocked intake tract: A dirty or irregularly cleaned air filter can lead to blockage in the vehicle's intake tract; 3. Fuel line blockage: Faults in the engine's spark plugs, ignition coils, fuel pump, or fuel line blockage can cause poor combustion of the engine's air-fuel mixture, leading to engine carbon buildup or detonation issues, which trigger the yellow engine warning light on the dashboard.

8

4

Share

Why can't the Volkswagen door be locked from the inside?

This is a unique safety design by Volkswagen. Except for using the "child lock" to lock the door, there is no other way to lock the door completely. Here is an introduction to the door lock actuator: 1. Introduction: The car door lock actuator is a specialized term, essentially referring to the car door lock controller. 2. Device: It is a control device that provides locking/unlocking pulse current to the door lock actuator. 3. Function: Regardless of the type of door lock actuator, the locking and unlocking of the door are achieved by changing the direction of the current supplied to the actuator, which controls the left and right movement of the linkage. The worm gear fixed on the motor output shaft meshes with the gear, and the inner cavity of the gear meshes with the swing arm. The working principle is: the vehicle's current source supplies power to the motor, the motor's rotation is converted into the swing of the swing arm, thereby completing the opening or closing cycle.

6

0

Share

Does Engine Bearing Failure Require Overhaul?

Since engine bearing failure requires disassembling the engine for repairs, an overhaul is necessary. Below are scenarios involving cylinder scuffing or piston crown burning: 1. Clogged oil cooling nozzle: The oil cooling nozzle on the engine block normally sprays oil into the piston cavity to cool the piston. If the oil cooling nozzle of a particular cylinder gets clogged, that cylinder's piston will accumulate heat and overheat, easily leading to piston crown burning or even cylinder scuffing. 2. Incorrect fuel injection timing: Whether the engine's fuel injection timing is delayed or advanced, it will result in incomplete fuel combustion. This not only makes the diesel engine operate roughly but also easily causes overheating, leading to cylinder scuffing or piston crown burning. 3. High intake air temperature: If the engine's intake air temperature is too high, the temperature of the air entering the cylinder increases, causing the engine to overheat. Prolonged operation under such conditions may result in cylinder scuffing or piston crown burning.

17

3

Share

Will I get points deducted for driving at 135 km/h in a 120 km/h speed limit zone?

Can a BYD F0 that has been driven for ten years still be driven?

What is the solution for not burning urea?

Where is the Jimny's four-wheel drive control box located?

Reasons for the Yellow Engine Warning Light?

Why can't the Volkswagen door be locked from the inside?

Does Engine Bearing Failure Require Overhaul?

Why does the side of the Audi A6 center console get hot?

Is the Everest under Changan Ford?

How to Engage Reverse Gear in Volkswagen Santana?

Is it normal for engine oil temperature to reach 100 degrees?