Will I fail the driving test if I don't turn on the wipers in the rain during Subject 3?

Arrizo 5 Spark Plug Replacement Tutorial?

Steps for replacing spark plugs in Arrizo 5: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for any leaves, dust, or debris externally and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to tighten further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replace every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. Refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs between 60,000-80,000 km.

15

0

Share

Where is the Equinox's spare tire located?

The Equinox's spare tire is located in the trunk. The spare tire size for the Equinox is 17 inches, and it is a non-full-size spare tire. This type of spare tire has a slightly smaller diameter and width, so it can only be used as a temporary replacement and should only be installed on non-driven wheels. Precautions for using the spare tire: 1. Regularly inspect the spare tire; 2. Do not store oil products with the spare tire; 3. The lifespan of a spare tire is approximately 4 years. In terms of body dimensions, the Equinox measures 4652 mm in length, 1843 mm in width, and 1684 mm in height, with a wheelbase of 2725 mm. For the exterior, the Equinox features a family-style three-dimensional dual grille, hawk-eye automatic full-LED headlights, hawk-eye LED daytime running lights, hawk-feather LED taillights, silver-wing aluminum roof rails, and 18-inch dual five-spoke aluminum alloy wheels.

14

5

Share

Where is the OBD port located on the Peugeot 2008?

The OBD port of the Peugeot 2008 is located inside the cover panel beneath the steering wheel. Simply pull down the cover panel from above by hand, and you will see the black-and-green OBD interface. The computer diagnostic connector, also known as the OBD connector, functions when the diagnostic card is inserted into the PCI slot. OBD, as an abbreviation for a proprietary term, stands for On-Board Diagnostics, which refers to the vehicle's onboard automatic diagnostic system. This system continuously monitors the working conditions of the engine's electronic control system and other functional modules of the vehicle during operation. If any abnormal conditions are detected, it identifies specific faults based on predefined algorithms and stores them as diagnostic trouble codes in the system's memory. The Dongfeng Peugeot 2008 adopts Peugeot's new family design language, featuring a dot-matrix grille with subtle chrome accents, creating a highly three-dimensional and sophisticated appearance. The headlight design draws inspiration from a lion's eye, with an irregular shape that stands out impressively. In terms of body dimensions, the Peugeot 2008 measures 4159mm in length, 1739mm in width, and 1578mm in height, with a wheelbase of 2538mm.

11

5

Share

What does 'on' mean in a car?

Car 'on' means turning on. By rotating the key to the 'on' position, you can power up the car. If you continue to turn it to the 'start' position, you can start the engine. The one-button start is a part of smart cars, which is a button device that simplifies the ignition process and can also be used to turn off the engine. The one-button start can be retrofitted at the original key lock position or installed as an independent panel. The functions of the one-button start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-button start, one-button shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, as well as the function of opening the trunk.

6

5

Share

What is the fuel consumption per 100 kilometers for the Chevrolet New Cruze 1.5 automatic?

The average fuel consumption for the New Cruze 1.5L automatic transmission is 7.5L/100km, while the 1.4T dual-clutch model consumes 7.4L/100km. Additional information: 1. Transmission: It is equipped with a 6-speed automatic manual transmission featuring auto start-stop functionality. The transmission is entirely new and differs from the 6AT in the older Cruze models, offering improved shift logic and smoother gear changes. The shifting action is relatively light, with well-controlled gear shift shock. 2. Fuel consumption: The 2018 Cruze has a combined fuel consumption ranging from 5.7L to 6.2L per 100 kilometers. Specifically, the 1.5L manual, 1.5L automatic sedan, 1.5L automatic hatchback, and 1.4T dual-clutch versions consume 5.9L, 6.1L, 6.2L, and 5.7L per 100 kilometers, respectively. Based on actual test data, the 1.5L automatic and 1.4T dual-clutch models achieve around 7.5L per 100 kilometers in urban driving conditions (average speed of about 30km/h), with even lower consumption on highways, closely matching the official figures. Actual fuel consumption may vary depending on individual driving habits and usage scenarios.

16

5

Share

How to Control the Clutch When Starting to Learn Driving?

The steps to control the clutch when starting to learn driving are: 1. Master the correct posture for pressing the clutch pedal. Place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is pressed to the lowest point, keep your knees slightly bent; 2. Do not use your toes to press the pedal or lift your heel off the ground to avoid insufficient force or slipping. Press the clutch all the way down to ensure complete separation and prevent wear; 3. When driving, do not release the clutch too quickly or deliberately raise the engine RPM too high, as this will accelerate clutch wear. Always press the clutch fully before shifting gears; 4. In low gears, beginners often experience jerking when accelerating or decelerating, especially in congested traffic conditions when following other vehicles.

5

3

Share

Will I fail the driving test if I don't turn on the wipers in the rain during Subject 3?

Arrizo 5 Spark Plug Replacement Tutorial?

Where is the Equinox's spare tire located?

Where is the OBD port located on the Peugeot 2008?

What does 'on' mean in a car?

What is the fuel consumption per 100 kilometers for the Chevrolet New Cruze 1.5 automatic?

How to Control the Clutch When Starting to Learn Driving?

What Causes Engine Oil to Leak into the Radiator?

What Causes the RPM of a Single-Cylinder Diesel Engine to Fluctuate?

What are the initial maintenance time and mileage for the BYD Song MAX?

How to Drive on Highways with Temporary License Plates?