Will I be fined if caught with excessive exhaust emissions?

Can Compulsory Traffic Insurance Cover Rear-End Collision with Full Liability?

Compulsory traffic insurance can indeed cover rear-end collisions where you are fully at fault, as it is designed to compensate third-party vehicles or individuals. If the compensation amount falls within the coverage limit of the compulsory insurance, the claim can be processed directly. If the amount exceeds the coverage limit, the remaining portion can be supplemented by commercial insurance. However, if commercial insurance has not been purchased, the excess amount must be borne by the policyholder. Compulsory Traffic Insurance for Automobiles: The full name of compulsory traffic insurance is "Compulsory Motor Vehicle Traffic Accident Liability Insurance." It is a mandatory liability insurance where the insurance company compensates for personal injuries and property losses (excluding vehicle occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. The premium is based on the nationally unified standard rates. However, the price of compulsory insurance varies depending on the vehicle type, primarily influenced by the number of seats. Compared to the over 20 exemption clauses in commercial third-party insurance, compulsory insurance covers a much broader range, including losses caused intentionally by the victim, the insured's own property losses, related arbitration and litigation costs, and certain indirect losses from accidents. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory insurance will provide compensation within the liability limits, with no deductible or exemption clauses. Introduction to Electronic Insurance Policies: An electronic insurance policy refers to a digital policy issued by an insurance company using digital signature software and enterprise digital certificates that comply with the PKI system, bearing the electronic signature of the insurer. An insurance policy, abbreviated as a policy, is the formal written proof of the insurance contract between the insurer and the insured. It must fully document the rights, obligations, and responsibilities of both parties. The content recorded in the policy serves as the basis for both parties to fulfill the contract. The policy is proof of the establishment of the insurance contract. Advantages of Electronic Insurance Policies: Saves paper resources, eliminating the need to print insurance proof labels; Time-saving and convenient, unrestricted by time or location, with information readily accessible online anytime, quickly and efficiently; Allows for reissuance and resending, eliminating concerns about loss. If a paper version is needed offline, it can be printed or mailed; Simplifies management, as the electronic standardization makes it easier for insurance companies and traffic police departments to manage vehicle insurance information.

11

2

Share

What documents should be brought for the first car maintenance?

The items required for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle purchase invoice, and vehicle registration certificate to the designated first maintenance institution for the vehicle's first maintenance. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial maintenance after the new car has been driven, and the specific time varies depending on the car, usually after driving 1000 to 3000 kilometers. The car needs to participate in the first maintenance in time, neither in advance nor delayed. The realization of the first maintenance marks the end of the car's running-in period, and it can be driven according to the standard load and normal speed required by the car. The time for the first car insurance is calculated according to the date of car collection. There are two indicator values for the first maintenance time: mileage and time. Whichever comes first is the standard. The first maintenance items include: oil change, oil filter replacement, cleaning of the air filter, checking whether various oil levels are normal, checking whether the generator belt and wiper blades are damaged, checking whether the tire pressure is normal, and checking whether the tires are damaged or bulging, etc. Required time: It takes about 2 hours to complete all the work. The most important thing for the first maintenance of a new car is to change the oil and oil filter. When changing the oil, the oil filter must be replaced together. When choosing the oil, you must refer to the "Vehicle Use and Maintenance Manual", as different models have different specifications for the oil to be used. Maintenance precautions: Do not rinse the interior of the car body with water: Many people will organize and clean the car by themselves during holidays, rinsing the body with water and scrubbing with a cloth. Here, it needs to be reminded that the interior of the car body does not need to be directly rinsed with water. If the floor mats are dirty, you can use a vacuum cleaner, or take them out, brush them with detergent, dry them, and then put them back. There are many through holes in the grooves under the rubber mats on the floor of the cab. After water enters, it will not dry by air, but will flow through the through holes to parts such as the gearbox for erosion and corrosion. The good practice is to clean with a vacuum cleaner and then scrub with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is insufficient, it is recommended that you drain the antifreeze as soon as possible and add the same brand of antifreeze from the beginning. Because the chemical functions of antifreeze of different brands are quite different. Various functional anticorrosives will corrode other functional anticorrosives. Different brands of antifreeze use different anticorrosives. Do not mix them to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When the bolts on the running car are rusty, they are usually oiled so that they can work normally again. In order to prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to the bolts and nuts, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts are simply lifted or even dropped, causing driving failure. When promoting the EFI car, there is no need to step on the accelerator: The promoter of the EFI car is different from that of ordinary cars. Its fuel injection control device can actively adjust the fuel supply according to the temperature and working conditions of the promoter, making the promoter smoothly promoted.

1

2

Share

Where is the trunk switch located on a Polo?

The external trunk switch for the Polo is located below the Volkswagen logo. Gently press it with your finger to open the trunk. Here are some common issues that may prevent the trunk from opening: 1. The trunk switch may be faulty. After prolonged use of a contact-type switch, the internal contact gap may become too large or dirty, preventing proper connection. 2. There may be an issue with the trunk lock. A damaged trunk lock can prevent opening. Replacing the trunk lock assembly can resolve this problem.

17

0

Share

How Often Should Full Synthetic Oil Be Changed?

Full synthetic oil can typically be changed every 10,000 to 12,000 kilometers or every six months, but the specific interval depends on the vehicle's driving conditions. Full synthetic oil has the following characteristics: 1. Better high and low temperature performance; 2. Longer oil change intervals; 3. Suitable for more severe driving conditions; 4. High lubricity, low friction resistance, resistance to oxidation, and strong cleaning properties. Additional information: Full synthetic oil is a type of artificially manufactured oil produced by chemically decomposing various natural substances and synthesizing them with other substances during the manufacturing process. Using full synthetic oil can extend the engine's lifespan and reduce maintenance frequency.

11

4

Share

Why is the car's turn signal flashing very fast?

The main reasons why a car's turn signal flashes very fast are: 1. A burnt-out turn signal bulb. Generally, turn signal bulbs such as the turn signal, front fender light, cornering light, or rear turn signal - if any of these bulbs are burnt out, it may cause the flashing frequency to become too fast during turns. 2. Poor contact in the turn signal: such as loose bulbs or poor plug connections. 3. Faulty bulb control relay: The relay controlling the turn signal light system circuit may be the cause. 4. Lighting circuit faults: Multiple reasons including poor wiring connections, poor grounding, incorrect bulb installation, rust, etc.

1

3

Share

Where is the horn of Baojun 310 located?

Baojun 310's horn is located inside the front bumper. Taking the Baojun 310 2020 model as an example, it is a 5-door, 5-seat hatchback with the following body dimensions: Length 4032mm, width 1680mm, height 1450mm, wheelbase 2550mm, fuel tank capacity 30L, luggage compartment capacity 251 to 1000L, and curb weight 985kg. The Baojun 310 2020 model is equipped with a 1.2L 4-cylinder naturally aspirated engine, with a maximum horsepower of 80ps and a maximum power of 59kw, matched with a 5-speed manual transmission.

18

2

Share

Will I be fined if caught with excessive exhaust emissions?

Can Compulsory Traffic Insurance Cover Rear-End Collision with Full Liability?

What documents should be brought for the first car maintenance?

Where is the trunk switch located on a Polo?

How Often Should Full Synthetic Oil Be Changed?

Why is the car's turn signal flashing very fast?

Where is the horn of Baojun 310 located?

What does it mean when it says 'Abnormal oil pressure, please turn off the engine'?

What is the fuel tank capacity of the Oshan X5 in liters?

What are the differences between the Haval Chitu and First Love?

What are the precautions when turning a car?