···
Log in / Register

Will I be fined and penalized for driving over the guide line when exiting the highway?

4 Answers
DelEleanor
07/24/25 1:10am

Driving over the guide line when exiting the highway will result in fines and penalty points. Here is the relevant information: Guide line: The guide line is a type of prohibition marking used to indicate that vehicles must follow the designated route and must not drive over or cross the line. Driving a motor vehicle in violation of prohibition signs or markings will result in a 3-point penalty. Prohibition marking violation: A prohibition marking violation refers to driving in a manner that violates the prohibition markings, such as changing lanes over a solid line. Violating prohibition markings refers to illegal actions committed by motor vehicles while driving. Making a U-turn in a no-U-turn zone or turning left where it is prohibited are both considered violations of prohibition markings. Prohibition markings include the solid yellow line in the middle of the road (indicating no crossing of the median) and the large yellow X (indicating no parking). Driving over these lines constitutes a violation of prohibition markings.

Was this review help?
3
2
Share
DelGia
08/10/25 8:37pm

Oh, I have a lot to say about crossing the diversion lines. As a driver with over a decade of experience on highways, I can tell you that you will definitely be fined. Diversion lines are specifically designed to guide vehicles safely off the highway. If you cross them, not only will you be caught by surveillance cameras, but you'll also face a 200-yuan fine and 3 penalty points. I've personally witnessed accidents caused by drivers forcing their way across these lines, nearly colliding with lane-changing vehicles—it's extremely dangerous. Remember, you should start slowing down, signaling, and moving to the right lane one or two kilometers before exiting the highway. Don’t wait until the last moment. Otherwise, accumulating too many penalty points could affect your driver's license, and worse, if an accident occurs, you’ll be held fully responsible—it’s just not worth it. Pay attention to road signs and speed limits regularly, and develop good driving habits to stay safe.

Was this review help?
19
1
Share
Expand All
DeOmar
09/24/25 2:53am

I only realized how strict this rule is after getting fined for crossing the line when exiting the highway last time. According to traffic regulations, driving over the guide line is prohibited, and violating this prohibition sign results in a direct fine of 200 yuan and 3 demerit points. It's especially easy to get caught at highway exits due to the highly sensitive surveillance equipment. I remember that time I was in a bit of a hurry because of heavy traffic, and the fine notice was sent directly to my home. Although the fine isn't huge, accumulating demerit points can lead to increased vehicle insurance costs and may even restrict your next vehicle inspection. My advice is to always check navigation prompts in advance, leave enough space for lane changes, and never rush for minor conveniences—safety should always come first.

Was this review help?
14
1
Share
Expand All
LeKaylee
11/07/25 5:05am

Back when I was a novice, I almost crossed the diversion line too, but luckily my instructor reminded me in time. Nowadays, all driving learners know that crossing the diversion line when exiting the highway will definitely result in a ticket—a 200-yuan fine plus 3 demerit points. After all, diversion lines are designed to separate lanes and prevent chaos; crossing them can disrupt traffic flow and increase accident risks. From my time at driving school to actual road experience, I’ve made it a habit to move to the right lane one or two kilometers in advance, avoiding the temptation to save time by staying in the fast lane. If you accidentally cross the line, immediately signal and correct your course—never stop on it. By avoiding violations in the long run, you’ll save both money and stress, since losing all your points means retaking the driving test.

Was this review help?
7
0
Share
Expand All
More Forum Discussions

What are the models and specifications of hydraulic cylinders?

Common standards include Φ140/100-800, which means the cylinder bore is 140, the rod diameter is 100, and the stroke is 800. For three-stage and four-stage hydraulic cylinders, the rated working pressure is 19MPa, the stroke ranges from 3880 to 6200mm, the maximum extending sleeve diameter is 195mm, and the cylinder thrust is 20-56 tons. The structural composition of hydraulic cylinders is introduced as follows: Introduction 1: The hydraulic cylinder of a hydraulic press consists of a cylinder head (guide sleeve), cylinder body, piston rod, piston head, sealing device, buffer device, and exhaust system. The hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy for linear motion. The hydraulic cylinder has a simple structure, smooth movement, and reliable operation. Introduction 2: The cylinder body of the hydraulic cylinder is made of high-quality carbon structural steel forgings to ensure material uniformity. The inner hole of the cylinder is subjected to strong rolling to improve surface smoothness, precision, hardness, and high rigidity, with good wear resistance. The hydraulic cylinder has a long service life. The piston rod and piston head of the hydraulic cylinder are made of carbon structural steel forgings, with chrome plating and fine grinding on the surface, providing high hardness and strong pressure resistance. Introduction 3: The sealing device of the hydraulic cylinder uses imported high-quality sealing rings, which have excellent wear resistance and heat resistance, low friction, avoiding cylinder leakage, ensuring reliable operation and extending the service life of the sealing rings. Introduction 4: The buffer device of the hydraulic cylinder can slow down the piston at the end of the stroke and bring the speed close to zero, reducing the inertial force of the piston moving parts and preventing collisions between the piston parts and the cylinder body, thereby reducing noise and vibration, avoiding damage to the hydraulic cylinder body, and extending the service life of the hydraulic cylinder. The exhaust system of the hydraulic cylinder ensures the smooth operation of the hydraulic cylinder and prevents intermittent impact forces and vibrations.
16
0
Share

Can a Motor Vehicle Driving License Be Used to Ride a Motorcycle?

Having a motor vehicle driving license does not permit one to ride a motorcycle. The traffic management department of the public security authority should establish a supervision system for the vehicle management office's handling of motor vehicle driving license services. Additionally, they should strengthen the supervision and management of driver examinations, the issuance of driving licenses, and their use. The following driving licenses allow one to ride a motorcycle: Introduction 1: The driving licenses that permit motorcycle riding are types D, E, and F. Among them, a D license allows the holder to drive all types of motorcycles, including both three-wheeled and two-wheeled ones, regardless of the engine displacement or model. Introduction 2: The D license covers the vehicle types permitted by the E and F licenses. An E license allows the holder to drive all two-wheeled motorcycles, regardless of engine displacement, and also includes the vehicle types permitted by the F license. An F license only permits the holder to ride light motorcycles with an engine displacement below 50CC (excluding 50CC). No car or other type of driving license allows one to ride a motorcycle.
19
4
Share

What Causes the Corolla's Locking Horn Not to Sound?

Corolla's locking horn not sounding is usually caused by the vehicle not being locked or the anti-theft system's battery running out. Here are the relevant details: Reasons why the locking horn does not sound: The vehicle is not locked, and the anti-theft system will only work after locking; the movement is slight, and lightly touching the vehicle will not activate the anti-theft system; the anti-theft system's battery is depleted, and replacing the power source will solve the issue; the anti-theft system is damaged, such as a short circuit in the circuit, and requires repair at a service center. Activating the locking horn: Locking and unlocking are divided into hazard light indicator and horn modes. By simultaneously pressing the lock (LOCK) and unlock (UNLOCK) buttons on the smart key for more than 2.5 seconds, the hazard light will flash once, and the horn will sound once, indicating that the horn mode has been activated.
4
0
Share

What are the precautions for overtaking a car?

Here are the precautions for overtaking a car: 1. Observe the road conditions: Before overtaking, observe the road conditions ahead and try to choose a flat and straight road. Before overtaking, observe the situation of the lane you intend to use. Check the left rearview mirror to see if there is a car behind you attempting to overtake. Wait for the car behind to complete its overtaking maneuver before proceeding with your own. 2. Use of lights: When the conditions for overtaking are met, turn on the left turn signal, then alternately flash the high and low beams and honk the horn to alert the car in front. Confirm that the car ahead has signaled to yield before turning left. 3. Driving in the borrowed lane: If you are already in the borrowed lane, downshift and press the accelerator deeply to increase the engine speed and boost power. The reason for downshifting is that when accelerating, downshifting and pressing the accelerator provides a quicker response, allowing for faster acceleration.
13
4
Share

Why don't 4S shops allow the installation of cruise control?

When purchasing a vehicle, some owners request 4S shops to install cruise control functionality, but some 4S shops advise against it. This is because installing a cruise control system differs from installing other vehicle accessories. The cruise control system needs to be connected to the engine control circuit, car airbags, and the central console. Such modifications can alter the original vehicle's circuitry and wiring, and improper installation may even damage the car. Cruise control systems, also known as speed control systems or autonomous driving systems, function by automatically maintaining the speed set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. Drawbacks of cruise control systems: They may malfunction, which can be extremely dangerous during high-speed driving. Cruise control is only suitable for use on highways or long-distance routes with light traffic and cannot be used on roads with complex conditions. When using cruise control, the driver's foot is freed from the accelerator pedal, leading to relaxation and reduced concentration. In emergency situations, this may delay braking response, resulting in untimely braking.
20
4
Share

What gear should an automatic transmission tow truck use?

An automatic transmission tow truck should be in N (Neutral) gear. Below are some relevant introductions about tow trucks: 1. The meaning of a tow truck: The full name of a tow truck is a road clearance vehicle, also known as a tow truck, road rescue vehicle, or towing vehicle. It has multiple functions such as lifting, pulling, and towing. Tow trucks are mainly used for road breakdown vehicles, urban traffic violation vehicles, and emergency rescue operations. 2. Precautions for towing: The color of the tow truck should be bright, preferably a warning color that can alert others. Reflective strips can be applied during night towing to remind passing vehicles. During towing, it is necessary to maintain good communication with the vehicle being towed, requiring close coordination between the two vehicles to control a safe distance. The tow rope should not be too short, as the vehicle being towed already has issues. If the tow rope is too short, sudden braking can easily lead to a rear-end collision between the two vehicles.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.