···
Log in / Register

Will I Be Caught on Camera If I Make a Right Turn from a Straight-Only Lane?

3 Answers
McChristian
07/29/25 4:05pm
If you make a right turn from a straight-only lane, you will be caught on camera, which may result in a fine and penalty points. Therefore, it's crucial to pay attention while driving. If you accidentally enter the wrong lane, follow the lane's designated direction and make a U-turn at the next intersection. Additional details are as follows: 1. Lanes: Generally, the rightmost lane is for right turns, the leftmost lane is for left turns, and the middle lanes are for straight-through traffic. Different lanes are designated to maintain traffic order. Driving randomly without adhering to lane markings can easily lead to accidents and traffic congestion. Always drive in the correct lane. 2. Strictly follow traffic rules on the road: Following traffic rules is not just about avoiding fines and penalty points, but also about ensuring your safety and the safety of others, as well as maintaining good traffic order. When driving on the road, never exceed the speed limit or drive under the influence of alcohol. Always obey traffic signals while driving.
Was this review help?
9
2
Share
GideonRose
08/15/25 4:20am
I've encountered this issue before. Once at an intersection, the light was green, I was in the straight lane but wanted to turn right. After hesitating, I still changed lanes. Later, I heard that intersection had installed electronic police specifically targeting vehicles not driving in the designated lanes. The straight lane is reserved for vehicles going straight. If you insist on turning right, the camera can identify your trajectory and may capture it, leading to fines and penalty points. Traffic police say this is a common violation. With dense surveillance in cities, especially on main roads, it's easier to get caught. Thinking about it, it's quite dangerous too—what if a straight-going vehicle behind crashes into you? My advice is to check road signs in advance while driving, find the dedicated right-turn lane before turning, and don't risk major consequences for temporary convenience.
Was this review help?
12
5
Share
Expand All
Octavian
10/12/25 5:37am
When I first got my driver's license, I was particularly worried about traffic violations. Turning right from a straight-only lane at a green light felt like a common misconception. In reality, lane designs follow strict regulations - straight lanes aren't meant for right turns, and forcing such maneuvers constitutes a violation. After checking traffic laws, I learned this counts as failing to follow directional lane markings. Electronic police surveillance can clearly capture such violations through video monitoring, with the system automatically issuing tickets upon detection. During my daily commute, I'd rather take detours adding a few extra minutes than risk penalties. New drivers often feel nervous, but remember: lane markings are the rulebook - following them brings peace of mind, saves effort, and prevents unnecessary trouble and safety risks.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.