···
Log in / Register

Will half of the car body pressing on the grid line result in penalty points?

4 Answers
DelMia
07/29/25 10:43am
Half of the car body pressing on the grid line generally will not result in penalty points. Below is the relevant introduction about grid lines: 1. Yellow grid line: The yellow grid line on the road indicates that all vehicles are strictly prohibited from parking for a long time or temporarily to prevent traffic congestion. When there is a vehicle stopped in front of the yellow grid line, the following vehicle must wait outside the yellow grid line until it is confirmed that there is enough space in front of the yellow grid line for the vehicle to stop, before it can drive over the yellow grid line. 2. Applicable locations: The yellow grid line is also painted in front of important state organs, military units, large enterprises and institutions, and public transport hubs to ensure that vehicles are not blocked by congested vehicles when entering or exiting. The grid line is yellow, and it is forbidden to occupy it when parking.
Was this review help?
10
1
Share
DiClaire
08/13/25 3:40pm
That's something you often encounter when driving in the city, and I understand your concern. As an experienced driver, I find it really easy to accidentally stop on the yellow grid lines, especially during rush hour. Traffic regulations generally stipulate that yellow grid lines are no-stopping zones, and any part of the vehicle crossing the line may be considered a violation. If half of your car is on the line and caught by cameras or traffic police, you could face penalty points and fines—typically 1 to 3 points depending on local regulations. This was emphasized during driver's license exams: grid lines are designed to prevent traffic jams, and if you stop on them, the entire intersection can get chaotic, increasing accident risks. Once, I carelessly stopped slightly on a grid line at an intersection and got caught by an electronic eye, resulting in penalty points—a lesson well learned. My advice is to slow down in advance, observe carefully, avoid tailgating, and develop good habits to prevent mistakes. Safety comes first—it's not just about penalty points but also about affecting others.
Was this review help?
19
1
Share
Expand All
DiStephen
10/07/25 6:41am
As a commuter often stuck in traffic, I find this issue very practical. Stopping halfway over the grid lines will most likely result in penalty points—this isn't just speculation, as traffic regulations clearly state that grid zones prohibit parking or lingering. If you're caught, whether by automated systems or traffic officers, expect a ticket, penalty points, and a fine of several hundred yuan. Having driven for many years, I've seen plenty of friends fall into this trap, especially at intersections where a moment of distraction can lead to mistakes. Grid lines serve an important purpose: they remind drivers not to block the road, preventing rear-end collisions or congestion. To avoid this, maintain a safe following distance and always check road markings at traffic lights. Developing this habit saves hassle and unnecessary expenses.
Was this review help?
2
4
Share
Expand All
MacTeagan
11/20/25 8:04am
I believe the key issue here lies in the safety aspect. Driving over half of the grid line is considered a violation in most areas, resulting in penalty points and fines. Grid lines are designed to prevent traffic congestion, and driving over them may obstruct traffic flow and increase the risk of accidents. The traffic police system deals with such violations directly without negotiation. When driving, it's essential to develop vigilance: slow down and judge the distance when you see grid lines. I've seen novice drivers ignore this and end up in dangerous situations. The lesson is clear: following the rules protects both yourself and others.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What are the precautions for daily use of ETC?

ETC stands for Electronic-Toll-Collection, which means electronic toll collection system. ETC can be processed at bank branches or highway service areas and other institutions. The original and photocopies of the vehicle owner's valid ID card and driving license are required. If it is not handled by the owner, the agent's valid ID card is also required. The photocopy of the driving license needs to include the page with the most recent annual inspection stamp; a bank card for deducting highway tolls; the applicant must be between 18 and 60 years old; and the vehicle must be registered under the individual's name. About the precautions for installing ETC: Do not block the line of sight. It is best to install it behind the rearview mirror: Many car models have a large rearward tilt angle of the windshield, resulting in a smaller driver's field of vision. If this is not considered when installing ETC, it will increase the driver's blind spot. Install it on the right side behind the rearview mirror to avoid blocking the line of sight. Do not affect charging: The ETC electronic tag requires power, but generally does not need to be charged or have its battery replaced because it has a solar panel on the back that can charge itself. Therefore, when installing, avoid the black areas on the windshield and do not place it where the solar panel is easily blocked. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal lever in. If it is removed casually, the lever will pop out and trigger the switch, locking the electronic tag and making it unusable. You will need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Precautions for using ETC: The ETC transaction sensing area is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, keep a distance of more than 10 meters from the vehicle in front to avoid automatically paying the toll for the vehicle in front; the recognition speed for ETC lanes is 20 kilometers per hour. If the speed is too fast, the vehicle device information cannot be read, resulting in a failed toll deduction; when using a debit card bound to ETC, insufficient balance will also cause the toll deduction to fail. Precautions for using ETC cards: Before using ETC to pass through the toll station, ensure that the ETC card is correctly inserted into the OBU. During driving, the ETC card may become loose due to bumps, so it needs to be checked in time. If it becomes loose, it should be inserted back into the OBU promptly. The ETC card must be dedicated to the vehicle and cannot be changed arbitrarily after being bound to the vehicle. Before using ETC, pay attention to the fee information displayed on the dedicated lane sign. If the card balance is insufficient, it needs to be recharged in time. When the car passes through the ETC lane and the barrier does not lift, you should actively follow the arrangement of the toll station staff or switch to the manual toll lane. If the ETC toll lane at the highway toll station is temporarily closed, you should use the manual toll lane to pay. The speed limit for ETC dedicated lanes is 20 kilometers per hour, and you should maintain a distance of more than 5 meters from the vehicle in front before passing through. If an ETC vehicle receives a toll card in the manual toll lane, it cannot use the ETC toll lane after exiting the highway and must use the manual toll lane.
2
2
Share

How to Set Up the Passat Audio System?

Passat audio adjustments can be made in the tone settings, where you can configure music categories, bass and treble, loudness, and the volume of front, rear, left, and right speakers. You can also adjust the high, mid, and low frequencies. It is recommended to attenuate the bass as the low frequencies are somewhat excessive, leading to noticeable standing waves. More details are as follows: 1. Car audio systems are installed to alleviate the monotony of travel for drivers and passengers. The earliest systems used AM car radios, later evolving to AM/FM radios, cassette players, and then to CD players compatible with DCC and DAT digital audio. 2. Today, car audio systems have reached high standards in terms of sound quality, operation, and vibration resistance, capable of handling the bumps of rough roads while ensuring stable performance and perfect sound quality. 3. It is widely acknowledged that audio systems have become one of the criteria for measuring the grade of modern cars. Therefore, car audio technology has become a focus for car consumers and enthusiasts.
3
0
Share

What to Do About Backfiring in the Exhaust Pipe?

Backfiring in the exhaust pipe should prompt an immediate check to see if the choke is fully open, with high-speed maintenance performed if necessary; after the engine is turned off, inspect the main nozzle from the carburetor port—if fuel is spraying or dripping, the float chamber fuel level is too high and should be adjusted to the specified range, with the main jet tightened or replaced; if the air filter is clogged, it should be cleaned or replaced. Relevant information about the exhaust pipe is as follows: 1. The exhaust pipe is part of the engine's exhaust system, which mainly includes the exhaust manifold, exhaust pipe, and muffler. Typically, the three-way catalytic converter, which controls engine pollutant emissions, is also installed in the exhaust system. The exhaust pipe generally includes the front exhaust pipe and the rear exhaust pipe. 2. The automotive exhaust system is primarily used in light-duty vehicles, micro-cars, and buses.
20
4
Share

How to reset the wrench light on Great Wall Fengjun 6?

Great Wall Fengjun 6 wrench light reset method: 1. Turn on the ignition switch. 2. Press the button on the instrument panel to switch the mode to display instant fuel consumption status. 3. Turn off the ignition switch. 4. Press and hold the "mode switch" button on the instrument panel, turn on the ignition switch, turn the switch to the "NO" position, and release the "mode switch" button. 5. Simultaneously press the "mode switch" button and the left "time adjustment" button on the instrument panel. The reset is complete. Fengjun 6 diesel maintenance light reset steps: 1. Turn off the ignition switch and disconnect the car's power. 2. Press and hold the 0.0 button, then turn on the ignition switch to power the car. 3. After the car is powered on, release the 0.0 button, then press the 0.0 button again. 4. This will reset the maintenance light.
7
5
Share

What is the fuel consumption of the Yaris L?

The fuel consumption of the Yaris L is 6.5-7.1L/100km. The currently available Yaris L models include five versions: the 2022 Yaris X 1.5L CVT Leading PLUS, Luxury PLUS, CVT Premium, Leading PLUS, and Luxury PLUS. The official NEDC combined fuel consumption is slightly lower than the actual fuel consumption, at 5.0L/100km. Among vehicles in the same class, the Honda Fit has an NEDC combined fuel consumption of 5.2-5.6L/100km, the LIFE has 5.6L/100km, the Vios FS has 4.9L/100km, the Vios has 4.9-5.1L/100km, and the Kia Pegas has 5.7L/100km. The fuel consumption of a car is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. The details are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light can increase fuel consumption. The vehicle itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier vehicles also have higher fuel consumption due to the need for greater driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
13
2
Share

How many liters of engine oil does a Cadillac XT5 require?

Cadillac XT5 requires approximately 4 liters of engine oil. It is recommended to use Mobil 1 Gold or Castrol Magnatec/Edge 5W-30 for Cadillac XT5. Below are relevant details: 1. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication, friction reduction, auxiliary cooling, sealing, rust prevention, and shock absorption. It is often referred to as the lifeblood of a car. 2. The engine is the heart of a vehicle. Inside the engine, there are numerous metal surfaces that move against each other at high speeds under harsh conditions, with operating temperatures ranging from 400°C to 600°C. Only qualified lubricants can reduce wear and tear on engine components and extend their service life under such extreme conditions. 3. The amount of engine oil added should be maintained between the upper and lower marks on the dipstick. Excessive oil can seep into the combustion chamber through the gap between the cylinder and piston, forming carbon deposits. These deposits can increase the engine's compression ratio and the likelihood of knocking. Additionally, too much oil can increase the stirring resistance of the crankshaft and connecting rod, leading to higher fuel consumption.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.