Will Flashing Pilot Lights Get You Fined?

What are the standard speeds for each gear of a motorcycle?

The standard speeds for each gear of a motorcycle are as follows: 1st gear for climbing hills is between 10 to 20 km/h, 2nd gear between 20 to 30 km/h, 3rd gear between 30 to 50 km/h, 4th gear between 50 to 60 km/h, and 5th gear between 60 to over 100 km/h. The most fuel-efficient speed range is between 30 to 50 km/h. The fuel consumption curve of an engine at different RPMs resembles a fishhook shape, with higher fuel consumption at low and high RPMs and lower fuel consumption at medium RPMs. This speed range is considered the economical speed. Practice has also shown that motorcycles are most fuel-efficient when traveling at a steady speed. Motorcycle riding precautions: Wear full riding gear, including a helmet and protective equipment. According to the new motor vehicle driver's license application and management regulations, riding a motorcycle without a helmet will result in a 2-point deduction. Follow highway traffic laws, do not speed, and avoid changing lanes arbitrarily. Motorcycles inherently have weaker braking capabilities compared to cars, so it is especially important to maintain a safe distance from the vehicle in front when riding on highways. Before entering the highway, check the vehicle's condition to ensure the braking system is functioning properly, tire pressure is normal, and the tires still have sufficient grip. Ensure the motorcycle meets the safety requirements for highway riding. A motorcycle safe for highway use should be able to cruise steadily at least at 100 km/h and still have the ability to overtake easily at that speed.

10

3

Share

How much is the fine and penalty points for removing the rear seats of a van?

Generally, there is no fine. For this behavior, once discovered, the traffic police department can impound the vehicle's license plate and registration certificate, order the owner to restore the original condition, impose a fine, and deduct three points. Here is additional information: 1. Regulations: According to the "Motor Vehicle Registration Measures" and the "Motor Vehicle Registration Work Standards," the vehicle management department determines the passenger capacity based on the number of seats when the vehicle leaves the factory, and the determined passenger capacity is not allowed to be changed. Removing seats will inevitably alter the "determined passenger capacity," which is considered a violation. 2. Precautions: Removing seats and carrying a large amount of cargo will change the ratio of the steering axle (wheel) load mass to the vehicle's curb weight and allowable load mass, thereby affecting the performance of the vehicle's steering system, posing safety hazards during driving, and potentially leading directly to traffic accidents.

6

1

Share

How to Open the Side Rearview Mirror?

The side rearview mirror usually has a control switch on the driver's door, which can be opened directly. There are two designs for the rearview mirror heating control switch: one is integrated with the electric rearview mirror adjustment combination switch, and the other is located on the air conditioning control panel. Below is an introduction to the correct usage of rearview mirrors: 1. Introduction One: During driving, the car is in a dynamic state of change. Drivers typically focus only on the traffic conditions ahead when observing and collecting traffic information, often neglecting the traffic conditions on both sides and behind. 2. Introduction Two: This means failing to utilize the rearview mirrors correctly for observation, leading to incorrect judgments and inappropriate operational measures.

9

4

Share

How Many Points Deducted from Driver's License Require Retraining?

If 12 points are deducted from the driver's license, a seven-day retraining session for Subject 1 (Traffic Regulations) is required. Below are the relevant details about the retraining process: 1. "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Article 68: If a motor vehicle driver accumulates 12 penalty points within one scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driver's license. The driver must report to the traffic management department of the public security authority at the license issuance location or the location of the violation within 15 days to undergo a seven-day study session on road traffic safety laws, regulations, and related knowledge. 2. Related Knowledge Test: After completing the study session, the vehicle management office must administer a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the driver passes the test, the penalty points will be cleared, and the driver's license will be returned. If the driver fails the test, they must continue studying and retake the test. If the driver refuses to participate in the study session or take the test, the traffic management department of the public security authority will announce the suspension of their driver's license.

9

2

Share

What is the height difference between 60 and 65 tires in centimeters?

The height difference between 60 and 65 tires when compared side by side is 5. When mounted on the axle, the height difference of the vehicle is 2.5. Here is some extended information: 1. The difference between 60 and 65: The difference between 60 and 65 aspect ratio tires lies in the fact that 65 has a higher aspect ratio. High aspect ratio tires have longer sidewalls, which provide better cushioning and generally higher comfort, but they offer poorer road feedback and weaker lateral resistance during turns. Conversely, low aspect ratio tires with large inner diameters have shorter sidewalls and wider treads, resulting in a larger contact area. These tires can withstand higher pressure, offer very sensitive road feedback, strong lateral resistance during turns, and better vehicle handling. 2. Choosing aspect ratio tires: After equipping a vehicle with wide, large inner diameter, low aspect ratio tires, besides improved handling, the visual effect also gives a more aggressive appearance. There is no inherently good or bad aspect ratio; the key lies in what type of car you have and which driving experience you prioritize, so you can choose the aspect ratio tires that best suit your vehicle.

5

4

Share

What Causes a Mazda 6 to Suddenly Stall While Driving?

The situation where a Mazda 6 stalls while driving is mostly caused by the following reasons: 1. Reason one: Due to issues with the ECU control logic. This requires the manufacturer to perform corresponding software upgrades. 2. Reason two: Malfunction in the fuel supply system. For example, a faulty fuel injection pump leading to inability to inject fuel, or a faulty fuel injection line causing delayed fuel supply. Below is relevant information about the Mazda 6: 1. Body dimensions: The Mazda 6 has a body length of 4670 mm, body width of 1780 mm, body height of 1435 mm, wheelbase of 2675 mm, front track of 1540 mm, rear track of 1540 mm, minimum ground clearance of 150 mm. The vehicle is a four-door, five-seater sedan with a fuel tank capacity of 64 liters and a trunk capacity of 500 liters. 2. Powertrain: The Mazda 6 is a midsize sedan equipped with a 2.0-liter naturally aspirated engine. The engine delivers a maximum horsepower of 147, maximum power of 108, and maximum torque of 183. It uses 92-octane gasoline with multi-point fuel injection. Both the engine block and cylinder head are made of aluminum alloy, paired with either a manual transmission or an automatic transmission.

11

1

Share

Will Flashing Pilot Lights Get You Fined?

What are the standard speeds for each gear of a motorcycle?

How much is the fine and penalty points for removing the rear seats of a van?

How to Open the Side Rearview Mirror?

How Many Points Deducted from Driver's License Require Retraining?

What is the height difference between 60 and 65 tires in centimeters?

What Causes a Mazda 6 to Suddenly Stall While Driving?

What Causes Many Small Pieces to Fall Off the Tire Tread?

What is the engine displacement of the Lamando 230?

What Does Full Car Waxing Mean?

How to Register an Out-of-Town Used Car in Your Local Area?