Will Factory Paint Naturally Crack?

1 Answers
MacAdriel
07/24/25 11:08pm
Under normal vehicle usage and proper maintenance, factory paint will not crack. Below is relevant information about paint cracking: 1. Explanation: If corrosive substances such as bird droppings or tree resin adhere to the car body and remain uncleaned for an extended period, exposure to summer heat and sunlight can cause the paint to crack. 2. Precautions: During vehicle use, pay attention to paint maintenance. Avoid washing the car under direct sunlight to prevent paint cracks caused by rapid temperature changes. Regularly inspect the paint surface; if cracks or scratches are found, address them promptly to prevent further damage from weathering. For minor scratches or chips, common solutions include sanding the surface with water sandpaper and applying touch-up paint or using the complementary paint provided by the manufacturer. If these are unavailable, evenly applying white toothpaste can also be effective, especially for white paint. Avoid using car covers for heat protection, as they can cause friction between the paint surface and the cover interior, especially in breezy conditions, which may inadvertently wear down the paint surface.
Was this review help?
11
0
Share
More Forum Discussions

How Many Kilograms is One Liter of Gasoline Equal to?

One liter of gasoline equals 1.45 kilograms. Gasoline is a volatile and flammable hydrocarbon mixture liquid derived from the distillation, cracking, or pyrolysis of petroleum, used as fuel. It appears as a transparent liquid, primarily composed of aliphatic hydrocarbons, naphthenic hydrocarbons, and a certain amount of aromatic hydrocarbons. Gasoline has a high octane rating and can be classified by octane levels into: 89, 90, 92, 93, 95, 97, and 98. Based on the manufacturing process, gasoline can be categorized into: straight-run gasoline, thermal cracking gasoline, catalytic cracking gasoline, catalytic reforming gasoline, polymerization gasoline, hydrocracking gasoline, alkylation gasoline, and synthetic gasoline. The characteristics of gasoline include: 1. Volatility; 2. Stability; 3. Anti-knock quality; 4. Corrosiveness; 5. Cleanliness.
1
1
Share

Do I need to remove the card when not using ETC?

It can be removed, but the ETC device will not function without the card. According to the "Rules for Using the Non-stop Rapid Passage System," the ETC card must be inserted into the OBU device for normal operation; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When inserting the ETC card into the OBU device, there will be a prompt sound, indicating that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so you need to reinsert the card when you want to use it. ETC is an electronic toll collection system, also known as an automatic road toll system. It is a specialized method for collecting tolls on roads, commonly used on highways, toll bridges or tunnels, and certain urban sections to alleviate traffic congestion. ETC Deduction Principles: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane, computer networking technology is used for backend settlement with banks, allowing vehicles to pass toll stations without stopping. This operates on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by eliminating stops at toll stations. Cost-saving: Reduces wear and tear, fuel consumption, and offers a 5% discount on toll fees. Improved efficiency: ETC lanes can theoretically process vehicles 2-3 times faster, making traditional ETC more advanced and efficient. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC," with a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: Beyond improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC use for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage.
9
3
Share

What causes the ABS light to come on after vehicle inspection?

There are multiple states of the ABS warning light, with different causes and solutions for each state, as detailed below: State 1: ABS warning light stays on constantly (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by mud, dirt, or other contaminants, affecting its ability to detect the corresponding speed signal. This prevents the ABS control module from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections between system wiring or poor contact in ABS relays causing signal issues and system failure. Solution: Check wiring connections and reconnect any loose parts. State 2: ABS warning light comes on intermittently, turning off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as engine speed increases and voltage rises. This may also occur due to insufficient power supply voltage to the ABS system, such as poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start until the engine is turned off. Cause: Poor grounding contact in the ABS hydraulic valve body; poor electrical connector contact in the ABS hydraulic valve body; ABS control module failure. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check for increased gap in connectors; replace the ABS or ABS/ASR control module. State 4: ABS warning light comes on during high-speed driving. Cause: During high-speed driving, the ABS control module detects a significant difference between rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light comes on intermittently. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage all the way down, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. The illuminated ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.
9
5
Share

Steps for Removing the Middle Row Seats in a Mercedes-Benz V260

On both sides of the middle row seat headrests, there are handles. Pulling these handles allows the seat back to fold forward. After folding, you can see the screws that need to be removed to detach the seat. The Mercedes-Benz V-Class is an MPV model with ample rear space.
18
1
Share

How to Clear the Yellow Tire Pressure Light on a Honda?

Tire pressure determines the load capacity. The load capacity of a car depends on the tire pressure; the lower the tire pressure, the lower the load capacity. When the tire pressure is too low, the contact area between the tire and the ground increases, leading to severe wear in the middle of the tire and a reduced contact area with the ground.
20
1
Share

How to close the tilted rear part of the sunroof?

System operation issue: You can try repeatedly closing the sunroof while driving by pressing and pulling the sunroof tilt button downward and forward. Hold down the lock button to close the windows. This may be caused by excessive resistance leading to motor overheating protection, which often occurs after summer sun exposure.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.