Will factory headlights fog up?

Is the Vehicle Management Office Open on Saturdays?

Vehicle inspection services are not available on Saturdays and Sundays as the Vehicle Management Office is closed. The office hours are from Monday to Friday, 8:30 AM to 11:30 AM and 1:30 PM to 5:00 PM (excluding statutory holidays). Below is some information about the Vehicle Management Office: 1. Fines cannot be paid at the Vehicle Management Office: The office does not handle traffic violation fines. To pay fines, you must visit the Traffic Police Brigade. If you lose the ticket, you can only process it at the brigade where the issuing officer is stationed; otherwise, it cannot be handled temporarily. 2. Services provided by the Vehicle Management Office: The office is primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation, as well as driver's license applications, replacements, renewals, and inspections, along with other related services for vehicles and drivers. 3. How to claim and pay fines: After 24 hours of issuance, fines can be paid at designated postal counters. If you are caught by a camera, upon receiving the notice, take it to the local traffic police department to confirm the fine. After signing, take the notice to the post office to pay. Note that in all cases, the fine must be processed within 15 days from the date of receiving the notice. After this period, a 3% late fee will be added daily based on the fine amount.

18

4

Share

What to Pay Attention to in High Temperatures?

When driving in high temperatures, it is important to carefully check for any aging or exposed wiring and repair it promptly to avoid unexpected incidents such as vehicle self-ignition. Be cautious about items placed inside the car; flammable and explosive items like lighters, perfumes, and spray cans should not be left in the car for extended periods to prevent accidents caused by excessive interior temperatures. More details are as follows: 1. During prolonged summer driving in high temperatures, regularly check tire pressure. The pressure should not be too high; it can be slightly lower, but not too low, as this may cause the steel wires inside the tires to deform, leading to potential hazards. 2. When wearing sunglasses while driving in high temperatures, avoid overly dark lenses. Opt for lighter-colored sunglasses to prevent visual errors. 3. Some drivers prefer wearing sandals when driving in summer heat, but this can be dangerous as sandals may cause the feet to slip, leading to reduced pedal control and abnormal braking, increasing the risk of accidents. 4. High temperatures can easily cause drowsiness, especially during midday in summer when people tend to feel particularly sleepy. It is crucial to avoid fatigue driving. If you feel mentally foggy while driving, find a safe spot to rest briefly until you regain alertness before continuing.

10

1

Share

What is the actual fuel consumption of the Haval Big Dog 2.0?

Haval Big Dog 2.0t has three models on sale. The two-wheel-drive Zhonghua Hunting Dog version is equipped with a 211-horsepower engine, with an NEDC fuel consumption of 7.2L per 100 kilometers. The four-wheel-drive Xiaotian Dog version and the four-wheel-drive Zhonghua Pastoral Dog version are also equipped with a 211-horsepower engine, with an NEDC fuel consumption of 8L per 100 kilometers in fuel mode. The distance that the Haval Big Dog can travel on a full tank of fuel is as follows: The fuel tank of the Haval Big Dog 2.0t is 61L, and the distance it can travel on a full tank is 61/7.2*100=847km. The fuel tanks of the four-wheel-drive Xiaotian Dog version and the four-wheel-drive Zhonghua Pastoral Dog version are 60L, and the distance they can travel on a full tank is 60/8*100=750km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, can increase fuel consumption. The car itself: Cars with larger displacements consume more fuel than those with smaller displacements because larger displacements generally mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Environmental temperature: Low environmental temperatures result in lower engine block temperatures. During cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, low temperatures cause the engine computer to control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

8

3

Share

What are the Three Japanese Swordsmen in the Automotive World?

The Three Japanese Swordsmen refer to the Accord, Camry, and Teana. These three models are all B-segment sedans, enjoying strong sales and favorable reputations. After its generational update, the Accord fully embraced the turbocharging era. The Camry adopted a new platform post-update, featuring a more youthful exterior design. The Teana, following its update, delivered enhanced power, improved handling, and a more contemporary appearance. Additionally, the Teana's engine incorporates a groundbreaking technology—the world's first variable compression ratio system. Below are details about the Teana's engines: 1. 2.0-liter Naturally Aspirated Engine: This engine produces 159 horsepower and 208 Nm of maximum torque. It achieves peak power at 6,000 rpm and maximum torque at 4,400 rpm. Equipped with dual C-VTC continuous variable valve timing and direct fuel injection, it features an aluminum alloy cylinder head and block. Notably, this engine does not include the variable compression ratio technology. 2. 2.0-liter Turbocharged Engine: Generating 252 horsepower and 380 Nm of maximum torque, this engine reaches peak power at 5,600 rpm and maximum torque at 4,000 rpm. It incorporates both variable compression ratio technology and continuous variable valve timing, along with an aluminum alloy cylinder head and block. Both engines are paired with CVT transmissions.

9

1

Share

Should a Car with a Blown Head Gasket Be Repaired or Sold?

A car with a blown head gasket can be repaired. With the continuous advancement in repair techniques and standards, if the engine receives proper and correct repairs after a blown head gasket, it will not significantly affect the car's usage. Here is some relevant information: 1. Main causes of a blown head gasket: (1) The engine operates at high temperatures for extended periods without adequate cooling, leading to deformation of the engine block due to overheating. (2) During engine assembly, the bolts connecting the cylinder head to the engine block were not tightened to standard specifications. Excessive pressure can then damage the head gasket. (3) Uneven surfaces between the cylinder head and engine block cause uneven pressure distribution on the head gasket, resulting in damage from high-pressure gas. (4) Neglecting regular maintenance, such as failing to check coolant and engine oil levels. Insufficient lubrication and coolant can lead to engine overheating, increased wear, and deformation of the engine block. (5) Long-term aggressive driving causes fluctuating pressure levels within the engine block. 2. Common symptoms of a blown head gasket: (1) Overheating coolant temperature (normal operating temperature is around 90°C). (2) Severe engine shaking accompanied by unusual noises. (3) Rapid consumption of coolant. (4) Engine oil turning into a cloudy, milky yellow color.

14

5

Share

What Does the Structure of a Car Door Lock Include?

The structure of a car door lock includes the following: 1. Large Bracket: The large bracket is the main component that drives the movement of the large latch. It serves as the main body for installing the large latch. The head of the large bracket is the riveting area for the large latch. The rectangular hole in the middle can engage with the hook on the pull plate. The outer step is the slot for the brake plate to snap into, while the lower part can fit into the slider clamp, facilitating the pulling of the slider. Additionally, when the large bracket is pushed inward, it is not obstructed by the slider clamp. 2. Small Bracket: The small bracket is the main body for installing the small latch and serves as the primary component controlling the self-locking of the large latch. The head of the small bracket is used to assemble the small latch, and the protruding triangular part in the middle is used to push the brake plate, thereby eliminating the self-locking effect of the brake plate on the large bracket. 3. Pull Plate: The pull plate plays a role in positioning and releasing the self-lock when the large latch is pulled inward. The hook at the top of the pull plate can be inserted into the rectangular hole in the middle of the large bracket, allowing it to pull the large bracket inward together or slide within the rectangular hole when the large bracket is pushed inward. The side extensions of the pull plate can move the brake plate to release its self-locking effect on the large bracket. The small circle in the middle of the pull plate is used for its own positioning, while the protrusions on both sides enable the large bracket to move within the formed groove. The lower clamp can fit into the slider clamp, allowing movement under the control of the slider.

4

2

Share

Will factory headlights fog up?

Is the Vehicle Management Office Open on Saturdays?

What to Pay Attention to in High Temperatures?

What is the actual fuel consumption of the Haval Big Dog 2.0?

What are the Three Japanese Swordsmen in the Automotive World?

Should a Car with a Blown Head Gasket Be Repaired or Sold?

What Does the Structure of a Car Door Lock Include?

Can a new car with temporary license plates but no vehicle license be driven on the road?

What Are the Causes of Power Steering Hose Fitting Oil Leakage?

What Does 'Low Washer Fluid' Mean?

What to Do If Cylinder Scoring Occurs After Carbon Deposit Cleaning in the Combustion Chamber?