Will exposed primer rust when it rains?

What are the reasons for the failure to connect CarPlay in the Envision?

Possible reasons for the failure to connect CarPlay in the Envision include damaged phone data cables, internal port damage, etc. Specific details are as follows: Damaged phone data cable: Check if the phone data cable has any signs of damage or breakage, and whether there are any foreign objects attached to the metal contact terminals on the USB plug and the phone plug or if the surface is oxidized. Internal port damage: Inspect the internal condition of the USB female port on the vehicle's external USB HUB for any damage, and whether the contact metal pieces can maintain good contact with the USB male plug. Loose connection: Check if there is any looseness in the connection between the vehicle's main unit and the external USB HUB. To avoid potential poor internal contact due to prolonged oxidation, repeatedly plug and unplug the two connectors of the cable several times.

13

5

Share

Can Hybrid Cars Be Charged?

Non-plug-in hybrid vehicles do not require charging, whereas plug-in hybrid models do. Plug-in hybrid vehicles are a product that bridges the gap between pure electric and fuel-powered cars. They are equipped with batteries and electric motors, as well as engines and transmissions. Both the engine and the electric motor can directly drive the wheels. When the battery is low, the engine also charges the battery. Within a certain range, they can be used as pure electric vehicles. Steps to replace the battery: 1. Remove the battery's securing mechanism. Some batteries may have a protective casing that needs to be removed first. 2. Disconnect the battery's negative terminal first. Be careful not to disconnect the positive terminal first, as this could cause a short circuit and sparks if the positive terminal touches the car body, which is very dangerous. 3. Remove the battery's positive terminal. The positive terminal usually has a protective device, so take care to avoid damaging it during removal. 4. Secure the battery in place, install the positive terminal first, and then the negative terminal, following the reverse order of removal.

14

0

Share

What is the function of an evaporator?

Evaporator's function is to evaporate the low-pressure refrigerant coming from the expansion valve, absorbing the heat from the air inside the vehicle, thereby achieving the purpose of cooling the interior. The working principle of an evaporator is to use the evaporation method, where the solution is heated, causing part of the solvent to vaporize and be removed, thus increasing the concentration of the solution. Types of evaporators include: flooded evaporators, dry evaporators, circulating evaporators, and spray evaporators. The evaporator mainly consists of two parts: the heating chamber and the evaporation chamber. The heating chamber provides the heat required for evaporation, promoting the boiling and vaporization of the liquid. After vaporization, it reaches the larger space of the evaporation chamber, where the liquid is separated from the vapor by its own condensation or the action of a demister.

18

3

Share

Are the Outlander CVT and X-Trail CVT the same?

The Outlander CVT and X-Trail CVT are not the same. The Outlander uses a transmission manufactured by Japan's JATCO, featuring their latest CVT8 technology, known for its wide gear range and smooth acceleration performance. The X-Trail, on the other hand, employs Nissan's advanced XTRONIC CVT intelligent continuously variable transmission, with a gear ratio range of up to 8.7. CVT offers flexible gear settings: Theoretically, a CVT transmission system can have an unlimited number of gears, allowing for more flexible gear settings. This makes it easier to achieve a balance between gear ratios, speed ratios, performance, fuel consumption, and emissions compared to traditional transmission systems. CVT provides smooth driving: Since CVT transmissions lack the gears found in conventional automatic transmissions, there is no gear-shifting process, eliminating the associated shift shock. As a result, the power output of a CVT transmission is linear, delivering an exceptionally smooth driving experience in real-world conditions.

16

3

Share

What does vehicle APA mean?

Vehicle APA stands for Auto Parking Assist (APA). It utilizes onboard sensors, typically ultrasonic radars or cameras, to identify available parking spaces and controls the vehicle's parking maneuvers through a control unit. The advantage of vehicle APA is that it enhances parking convenience to some extent, especially for drivers who lack parking confidence or experience parking anxiety. It enables single-attempt parking, eliminating the need for multiple steering adjustments. While automatic parking can free the driver's hands, it has a significant drawback: insufficient accuracy in automatic space recognition. The system primarily relies on multiple sensing radars to determine distances from obstacles. If obstacles are suspended mid-air or too low in height, the sensors may fail to detect them, potentially leading to frictional contact or collisions. APA represents first-generation automatic parking technology, requiring driver assistance inside the vehicle to complete parking. In contrast, AVP (Automated Valet Parking), as fourth-generation technology, enables remote operation from within 500 meters - allowing the vehicle to autonomously locate parking spaces and park, then return to a driver-specified location when needed.

8

4

Share

Which has higher fuel consumption: city driving or highway driving?

City driving consumes more fuel. On city roads, cars often idle, while on highways, cars do not idle. During car design, there is an optimal speed for fuel efficiency, at which the car's fuel consumption is the lowest. On city roads, the car's speed is often much lower than this optimal speed. When driving in daily life, pay attention to the following: Choose high-quality fuel and regularly clean carbon deposits. Poor-quality gasoline can increase carbon deposits in the engine, roughen the intake pipe, affect air intake efficiency, and increase fuel consumption. Regularly check tire wear and tire pressure. Low tire pressure increases friction between the tires and the road, leading to greater resistance and higher fuel consumption. Also, frequently inspect tire wear. Severe wear can cause slipping, resulting in increased fuel consumption. Daily driving habits also impact fuel consumption. Therefore, reasonable vehicle use is not just about following the owner's manual; developing good driving habits is equally crucial.

7

2

Share

Will exposed primer rust when it rains?

What are the reasons for the failure to connect CarPlay in the Envision?

Can Hybrid Cars Be Charged?

What is the function of an evaporator?

Are the Outlander CVT and X-Trail CVT the same?

What does vehicle APA mean?

Which has higher fuel consumption: city driving or highway driving?

How Far Can You Drive When the Fuel Gauge Yellow Light Flashes?

What are the types of crankshaft position sensors?

What is the fuel consumption of the 2009 Hyundai Tucson old model?

Can You Park on the Highway Emergency Lane?