Will driving with a detached intake pipe damage the engine?

2 Answers
Lauren
07/29/25 3:19am
Driving with a detached intake pipe will damage the engine. Reasons why it can damage the engine: The intake pipe is the manifold that connects the air filter to the carburetor. The intake manifold is the pipe that connects the bottom of the carburetor at the upper end to the intake valve of the cylinder block at the lower end. Without the intake pipe, issues such as vehicle shaking, insufficient engine power, and increased fuel consumption may occur. Intake pipe: Includes the main intake pipe and the branch intake pipes. In addition to power performance, the engine must also have good fuel economy and emission performance. In gasoline engines, the intake pipe must also consider issues such as fuel atomization, evaporation, distribution, and the utilization of pressure waves. In diesel engines, it is also required that the airflow forms an intake vortex in the cylinder through the intake port to improve mixture formation and combustion.
Was this review help?
10
3
Share
MacDelaney
08/12/25 7:11am
Last week while driving, I encountered a situation where the intake pipe came loose. Suddenly, the engine noise became significantly louder, roaring like thunder, and there was a noticeable lack of power during acceleration. I immediately pulled over to check and found that the pipe in front of the air filter had fallen off. The mechanic told me that driving in this condition was equivalent to letting the engine 'drink the northwest wind' directly, allowing dust and sand particles to enter the cylinders, which would double the wear on the pistons and cylinder walls. Just a few dozen kilometers could lead to cylinder scoring. In severe cases, it could also cause the throttle to jam and the catalytic converter to clog. Later, I spent three days cleaning the inside of the engine. Had I known, I should have called a tow truck immediately. So now, whenever I hear any unusual noise, I absolutely stop to check it out right away.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

What are the essential tools to have in a car for annual inspection?

The essential tools to have in a car for annual inspection are a warning triangle, fire extinguisher, and jack. Warning triangle: If the car is not equipped with a warning triangle, failing to set up the warning sign behind the vehicle after a breakdown or accident will result in penalty points, and it is extremely dangerous as it can easily lead to secondary accidents. Fire extinguisher: If medium-sized and above passenger vehicles or hazardous goods transport vehicles are not equipped with fire extinguishers, the traffic authorities will penalize the driver according to regulations. Cars without fire extinguishers will not pass the annual inspection. For safety reasons, family cars should also be equipped with fire extinguishers. Jack: When driving, it's inevitable to encounter a flat tire. A jack is needed when changing a tire. The jack should be placed on the inner side of the car's side skirt, approximately 20 cm behind the front wheel and 20 cm in front of the rear wheel. Without a jack, it will be very difficult to change a spare tire.
11
4
Share

The Correct Sequence for Starting and Parking an Automatic Transmission Vehicle

To start an automatic transmission vehicle, first press the pedal, pull the gear lever, release the handbrake, slowly release the pedal, and gently press the accelerator. The specific starting sequence is as follows: Press the brake pedal with your right foot. For forward movement, pull the gear lever to the D (Drive) position; for reverse, pull it to the R (Reverse) position. Release the handbrake. Slowly release the brake pedal. Move your right foot to the accelerator pedal and gently press to proceed. The parking method is as follows: Select the parking spot, move your right foot from the accelerator to the brake. Press the brake according to speed and distance, pressing gently except in emergencies. Once the vehicle is stationary, press the brake firmly to prevent rolling. For long-term parking, after the vehicle is stationary, engage the handbrake, turn off the engine, and shift the gear lever to the P (Park) position.
13
4
Share

Why is the car shaking severely?

The severe shaking of the car may be caused by the following three reasons: Wheel imbalance: Wheel imbalance is a common issue in many vehicles. During manufacturing, it is impossible to ensure uniform quality of tires and steel rims, so wheels must undergo dynamic balancing after assembly. Moreover, as tires wear over time, periodic dynamic balancing is necessary after certain mileage. Loose suspension structure: The chassis suspension consists of various links and support arms, which are connected through ball joints and rubber bushings. Normally, these components are tightly connected, but as the ball joints and bushings wear out, the connections loosen, causing the suspension to become loose and resulting in body shaking while driving. Excessive steering gear backlash: The steering system of a car uses a rack-and-pinion mechanism to convert the rotational motion of the steering wheel into the swinging motion of the wheels. Over time, wear between the rack and pinion creates backlash, causing slight left and right movements of the wheels even without steering input, leading to a sensation of body shaking.
17
5
Share

What car is known as the 'mobile sofa'?

The 'mobile sofa' refers to the seventh-generation Teana. Features: The seventh-generation Teana's ergonomic seats feature three-layer cushioning technology, providing comfortable seating positions for all body types. The newly upgraded 3D side wing support effectively minimizes body sway, while the generously padded seats truly live up to its 'mobile sofa' reputation. The steering wheel adopts a sporty flat-bottom design with optimal size and excellent grip. Exterior: The seventh-generation Teana showcases a completely new design language with more youthful and sporty elements. It has abandoned the traditional 'TEANA' naming and adopted the 'ALTIMA' designation consistent with overseas models. The front fascia features a more exaggerated V-shaped chrome grille, complemented by expected full LED headlights. The panoramic sunroof is specifically designed for Chinese consumers. The angular rear design harmonizes with the bold front, featuring three-dimensional taillights with smoked edges - though unfortunately not LED-lit.
17
2
Share

What does the red triangle with a car inside mean on a Mercedes dashboard?

Mercedes dashboard red triangle with a car inside represents the Distance Warning Light, which reminds the driver to maintain a safe distance from the vehicle ahead to prevent rear-end collisions and avoid traffic accidents. When this light is on, simply maintaining a proper distance allows normal driving. Additional information: 1. Front and rear fog light indicators: These show the working status of the front and rear fog lights. When the fog lights are turned on, both indicators light up. 2. Turn signal indicators: When the turn signal is activated, the corresponding indicator flashes at a certain frequency. When the hazard warning lights are pressed, both indicators light up simultaneously. The indicators automatically turn off once the turn signals are deactivated. 3. High beam indicator: This shows whether the headlights are in high beam mode. Normally, this indicator is off but lights up when the high beams are activated or during the momentary high beam function. 4. Seatbelt indicator: This displays the seatbelt status. Depending on the vehicle model, the light may stay on for a few seconds as a reminder or until the seatbelt is fastened. Some vehicles may also include an audible alert.
19
2
Share

How to Determine a Car's Manufacturing Date from the Glass?

There is a code located at the bottom left or right corner of the car window glass. In the last or second last row, you will find a number and several small black dots, which indicate the production date of the glass, and consequently, the car's manufacturing date. The number represents the production year of the glass, while the small black dots are used to determine the production month. Below is an introduction about car glass: 1. The markings on the front and rear windshields are different because they belong to different types of glass, and the manufacturer's part numbers also vary. 2. Generally, the glass marking consists of a combination of symbols, numbers, and English letters printed in the lower left corner of the glass. It includes information such as the car brand, glass brand, certification mark, glass type, and production date. 3. The safety performance of car windshields is extremely important. Typically, car glass is made of silica glass, with silicon dioxide content exceeding 70%, and the rest composed of sodium oxide, calcium oxide, magnesium, etc., manufactured through the float glass process.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.