Will crossing the line at traffic lights result in penalty points?

1 Answers
DeKira
07/30/25 5:29am
When driving through a traffic light intersection, if a vehicle crosses the solid line, penalty points will be deducted. It is recommended that drivers reduce speed when approaching traffic light intersections, maintain proper distance between vehicles, and avoid crossing the line. Pay attention to traffic signs to prevent running red lights. Here are some tips for navigating traffic lights: 1. When passing through a straight intersection with only one set of traffic lights, follow normal traffic rules: stop when the light is red and proceed when it is green. At intersections where U-turns are allowed, you can make a U-turn regardless of the traffic light. Some intersections may allow U-turns only when the light is red, so pay attention to the specific rules. If you see a 'No U-turn' sign, U-turns are prohibited at that intersection. Be flexible in understanding traffic light instructions and avoid running red lights. 2. When passing through a T-intersection, there are two scenarios: First, vehicles making a U-turn or right turn do not need to rely on traffic lights—just ensure safety when turning left. Second, vehicles making a U-turn do not rely on traffic lights, but left-turning vehicles must follow the traffic light signals, while right-turning vehicles still do not need to rely on them. Always observe traffic signals carefully to avoid violations.
Was this review help?
15
5
Share
More Forum Discussions

How to Check the Car Engine Number?

Here are the methods to check the car engine number: 1. Check the engine number through the vehicle's registration certificate. 2. Below the windshield at the front of the driver's position, there is a row of very small numbers, which is the engine number. 3. Open the front engine hood, and you can see the engine number on the flat panel to the right of the engine throttle. The meaning represented by the car engine number is as follows: 1. Prefix: Includes product series code, generation symbol, and regional or enterprise code. Manufacturers can choose the corresponding letters as needed, but they must be approved and filed by the industry standard regulatory body. 2. Middle section: Consists of the cylinder count symbol, cylinder arrangement symbol, stroke symbol, and cylinder diameter symbol. 3. Suffix: Composed of structural feature symbols and usage feature symbols. 4. Tail: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects appropriate symbols. The suffix and tail can be separated by a hyphen (-).
10
5
Share

What is the engine model of the BMW 3 Series?

The engine model of the BMW 3 Series is B48B20C. Below is an introduction to the BMW 3 Series: 1. The BMW 3 Series is a mid-size car launched by BMW. The biggest advantage of this series is its handling performance. In terms of power, this car is equipped with a 2.0T turbocharged engine, with a maximum power of 135kw and a maximum torque of 300N/m. In terms of the transmission system, the engine is matched with an 8-speed automatic transmission from ZF. 2. After a comprehensive upgrade and tuning, the BMW 3 Series engine consumes 5% less fuel compared to the previous generation. Not only does it excel in fuel economy, but its power performance is also outstanding. 3. The all-new BMW 3 Series has handling that surpasses other models in its class. The car's chassis tuning leans towards comfort, and the body rigidity has been improved. The design of the all-new model also features a breakthrough in appearance, with an overall more sporty design.
8
0
Share

What are the advantages of pure electric vehicles?

Pure electric vehicles are powered by charging the vehicle's battery from an external power source, which then drives the electric motor. Pure electric vehicles offer the following advantages: 1. Environmental Protection: Electric vehicles use power battery packs and electric motors for propulsion, producing no exhaust gases or tailpipe emissions during operation, which is highly beneficial for environmental protection and air cleanliness. 2. Low Noise: Electric vehicles do not generate noise like conventional vehicles, and the noise they produce is very minimal. 3. Economical: The operating cost of electric vehicles is low, approximately one-fifth that of gasoline-powered vehicles. They also have high energy conversion efficiency and can recover energy during braking and downhill driving, improving energy utilization efficiency. Charging during nighttime using the grid's low-cost "off-peak electricity" helps balance peak and off-peak grid loads. 4. Easy Maintenance: Electric vehicles are driven by motors and batteries, eliminating the need for the complex maintenance tasks associated with traditional engines, such as changing engine oil, filters, belts, etc. Electric vehicles only require regular inspections of components like the motor and battery. 5. Policy Advantages: They enjoy higher lottery success rates for license plates, substantial subsidies, and exemption from purchase taxes, making their policy advantages quite significant.
16
1
Share

What are the main components of antifreeze?

The main components of antifreeze are 50% purified water, 40% methanol, and 10% other substances. Classification of antifreeze: Antifreeze is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. The basic indicators of antifreeze are freezing point and boiling point. In the market, antifreeze comes in several specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. It is generally advisable to choose one that is at least 10°C lower than the lowest temperature in your region. Antifreeze replacement cycle: For vehicles that run for long periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter running times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which can reduce the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. Long-lasting antifreeze can have a validity period of up to three years. If suspended matter, sediment, or signs of deterioration or discoloration are found in the antifreeze, it should be replaced promptly, and the system should be cleaned.
18
2
Share

Can the remaining half of the coolant still be used?

Coolant remaining half can still be used. Coolant is a type of cooling liquid containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and preventing scale and corrosion all year round. Types of coolant: Coolant is generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. Methods for selecting coolant: The basic indicators of coolant are freezing point and boiling point. On the market, coolants come in several specifications with freezing points of -15℃, -25℃, -30℃, -40℃, etc. It is generally advisable to choose one that is at least 10℃ lower than the lowest temperature in your region. Functions of coolant: Coolant is non-corrosive. It is a type of cooling liquid containing special additives, mainly used in liquid-cooled engine cooling systems. Coolant has excellent properties such as preventing freezing in winter, boiling in summer, and preventing scale and corrosion all year round. Composition of coolant: The main components of coolant are: fifty percent pure water, forty percent methanol, and ten percent other substances.
7
4
Share

How to Replace the Battery in an Older Model Mercedes-Benz E200 Supercharged Version Key?

Steps to replace the battery in an older model Mercedes-Benz E200 supercharged version key are as follows: 1. Flip open the tab at the rear end of the key to remove the mechanical key. 2. Insert the mechanical key into the side slot of the key and press the internal gray button. 3. With the other hand, push the rear end of the key upward; when a gap opens, remove the mechanical key. 4. Then manually take out the rear end to proceed with battery replacement. 5. After installing the new battery, reinsert the key bracket to complete the key battery replacement. Notes: 1. The lifespan of a Mercedes-Benz key battery is generally two years, while the original factory battery can last up to six years. 2. When the key battery is depleted, the Mercedes-Benz vehicle will provide two types of alerts: one is pressing the ignition switch, where the dashboard will display a message to replace the key battery; the second is pressing the lock or unlock button on the key. If the indicator light on the key dims or does not light up, it indicates that the key battery needs replacement.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.